linux-stable.git/net/ipv4, branch v5.4.249 Linux kernel stable tree xfrm: Linearize the skb after offloading if needed. 2023-06-28T08:18:38+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2023-06-14T10:02:02+00:00 bf7a4fd33669792d0eaefdf4e373284a3bd1eeed [ Upstream commit f015b900bc3285322029b4a7d132d6aeb0e51857 ] With offloading enabled, esp_xmit() gets invoked very late, from within validate_xmit_xfrm() which is after validate_xmit_skb() validates and linearizes the skb if the underlying device does not support fragments. esp_output_tail() may add a fragment to the skb while adding the auth tag/ IV. Devices without the proper support will then send skb->data points to with the correct length so the packet will have garbage at the end. A pcap sniffer will claim that the proper data has been sent since it parses the skb properly. It is not affected with INET_ESP_OFFLOAD disabled. Linearize the skb after offloading if the sending hardware requires it. It was tested on v4, v6 has been adopted. Fixes: 7785bba299a8d ("esp: Add a software GRO codepath") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f015b900bc3285322029b4a7d132d6aeb0e51857 ]

With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.

esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.

It is not affected with INET_ESP_OFFLOAD disabled.

Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.

Fixes: 7785bba299a8d ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
treewide: Remove uninitialized_var() usage 2023-06-09T08:29:01+00:00 Kees Cook keescook@chromium.org 2020-06-03T20:09:38+00:00 0638dcc7e75fbb766761e7b4694d0f0f141bbbd1 commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream.

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set 2023-06-09T08:28:53+00:00 Cambda Zhu cambda@linux.alibaba.com 2023-05-27T04:03:17+00:00 381a703220fb603e9ec0ed6111bd577f30d0d1ed [ Upstream commit 34dfde4ad87b84d21278a7e19d92b5b2c68e6c4d ] This patch replaces the tp->mss_cache check in getting TCP_MAXSEG with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if it's zero is probably a bug. With this change, getting TCP_MAXSEG before connecting will return default MSS normally, and return user_mss if user_mss is set. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Jack Yang <mingliang@linux.alibaba.com> Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/ Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230527040317.68247-1-cambda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 34dfde4ad87b84d21278a7e19d92b5b2c68e6c4d ]

This patch replaces the tp->mss_cache check in getting TCP_MAXSEG
with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since
tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if
it's zero is probably a bug.

With this change, getting TCP_MAXSEG before connecting will return
default MSS normally, and return user_mss if user_mss is set.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jack Yang <mingliang@linux.alibaba.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230527040317.68247-1-cambda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp: deny tcp_disconnect() when threads are waiting 2023-06-09T08:28:53+00:00 Eric Dumazet edumazet@google.com 2023-05-26T16:34:58+00:00 32e9a9ee285ff1c72beafca561fb84315365dda3 [ Upstream commit 4faeee0cf8a5d88d63cdbc3bab124fb0e6aed08c ] Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4faeee0cf8a5d88d63cdbc3bab124fb0e6aed08c ]

Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.

A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.

tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.

Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.

When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]

This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().

If this counter is not zero, tcp_disconnect() returns an error.

This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.

Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipv{4,6}/raw: fix output xfrm lookup wrt protocol 2023-06-05T06:17:33+00:00 Nicolas Dichtel nicolas.dichtel@6wind.com 2023-05-22T12:08:20+00:00 5b7d4d91c047f797117d48e959e2737bcf7e2d71 commit 3632679d9e4f879f49949bb5b050e0de553e4739 upstream. With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the protocol field of the flow structure, build by raw_sendmsg() / rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy lookup when some policies are defined with a protocol in the selector. For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to specify the protocol. Just accept all values for IPPROTO_RAW socket. For ipv4, the sin_port field of 'struct sockaddr_in' could not be used without breaking backward compatibility (the value of this field was never checked). Let's add a new kind of control message, so that the userland could specify which protocol is used. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3632679d9e4f879f49949bb5b050e0de553e4739 upstream.

With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()),  is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.

For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.

For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). 2023-05-30T11:44:09+00:00 Kuniyuki Iwashima kuniyu@amazon.com 2023-05-23T16:33:05+00:00 7e3ae83371a4809da6fa3f10ccc430eecef3034a commit ad42a35bdfc6d3c0fc4cb4027d7b2757ce665665 upstream. syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ad42a35bdfc6d3c0fc4cb4027d7b2757ce665665 upstream.

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using
IPPROTO_UDPLITE (0x88):

  14:25:52 executing program 1:
  r0 = socket$inet6(0xa, 0x80002, 0x88)

We had a similar report [1] for probably sk_memory_allocated_add()
in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix
NULL pointer dereference") fixed it by setting .memory_allocated for
udplite_prot and udplitev6_prot.

To fix the variant, we need to set either .sysctl_wmem_offset or
.sysctl_rmem.

Now UDP and UDPLITE share the same value for .memory_allocated, so we
use the same .sysctl_wmem_offset for UDP and UDPLITE.

[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023
RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline]
RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006
Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b
RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000
RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8
RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000
R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0
Call Trace:
 <TASK>
 __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077
 udp_rmem_schedule net/ipv4/udp.c:1539 [inline]
 __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581
 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline]
 udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775
 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793
 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline]
 __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013
 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437
 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482
 NF_HOOK include/linux/netfilter.h:303 [inline]
 NF_HOOK include/linux/netfilter.h:297 [inline]
 ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491
 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585
 dst_input include/net/dst.h:468 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 NF_HOOK include/linux/netfilter.h:297 [inline]
 ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491
 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605
 netif_receive_skb_internal net/core/dev.c:5691 [inline]
 netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750
 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553
 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989
 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035
 call_write_iter include/linux/fs.h:1868 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x945/0xd50 fs/read_write.c:584
 ksys_write+0x12b/0x250 fs/read_write.c:637
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x70/0x82
RIP: 0023:0xf7f21579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040
RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:

Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1]
Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema")
Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nftables: add nft_parse_register_load() and use it 2023-05-30T11:44:07+00:00 Pablo Neira Ayuso pablo@netfilter.org 2023-05-16T14:44:27+00:00 25336cd96b034de2c59af65cbbe17f6afb748371 [ 4f16d25c68ec844299a4df6ecbb0234eaf88a935 ] This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ 4f16d25c68ec844299a4df6ecbb0234eaf88a935 ]

This new function combines the netlink register attribute parser
and the load validation function.

This update requires to replace:

	enum nft_registers      sreg:8;

in many of the expression private areas otherwise compiler complains
with:

	error: cannot take address of bit-field ‘sreg’

when passing the register field as reference.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode 2023-05-30T11:44:05+00:00 Peilin Ye peilin.ye@bytedance.com 2022-04-21T22:09:02+00:00 f185ede016c9477fc29cf489873d8f5dc0b5c70f [ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info->key.tun_id),
			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md")
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipv4: Fix potential uninit variable access bug in __ip_make_skb() 2023-05-17T09:35:45+00:00 Ziyang Xuan william.xuanziyang@huawei.com 2023-04-20T12:40:35+00:00 27c468ec1af113f6ae94fb5378f65e6038bd16e7 [ Upstream commit 99e5acae193e369b71217efe6f1dad42f3f18815 ] Like commit ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()"). icmphdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp_hdr(skb)->type directly will trigger the uninit variable access bug. Use a local variable icmp_type to carry the correct value in different scenarios. Fixes: 96793b482540 ("[IPV4]: Add ICMPMsgStats MIB (RFC 4293)") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99e5acae193e369b71217efe6f1dad42f3f18815 ]

Like commit ea30388baebc ("ipv6: Fix an uninit variable access bug in
__ip6_make_skb()"). icmphdr does not in skb linear region under the
scenario of SOCK_RAW socket. Access icmp_hdr(skb)->type directly will
trigger the uninit variable access bug.

Use a local variable icmp_type to carry the correct value in different
scenarios.

Fixes: 96793b482540 ("[IPV4]: Add ICMPMsgStats MIB (RFC 4293)")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). 2023-04-26T09:24:05+00:00 Kuniyuki Iwashima kuniyu@amazon.com 2022-10-06T18:53:47+00:00 9374db5bd1e3b5464da8718d4e484530ed70f2e7 commit d38afeec26ed4739c640bf286c270559aab2ba5f upstream. Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were able to clean them up by calling inet6_destroy_sock() during the IPv6 -> IPv4 conversion by IPV6_ADDRFORM. However, commit 03485f2adcde ("udpv6: Add lockless sendmsg() support") added a lockless memory allocation path, which could cause a memory leak: setsockopt(IPV6_ADDRFORM) sendmsg() +-----------------------+ +-------+ - do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...) - sockopt_lock_sock(sk) ^._ called via udpv6_prot - lock_sock(sk) before WRITE_ONCE() - WRITE_ONCE(sk->sk_prot, &tcp_prot) - inet6_destroy_sock() - if (!corkreq) - sockopt_release_sock(sk) - ip6_make_skb(sk, ...) - release_sock(sk) ^._ lockless fast path for the non-corking case - __ip6_append_data(sk, ...) - ipv6_local_rxpmtu(sk, ...) - xchg(&np->rxpmtu, skb) ^._ rxpmtu is never freed. - goto out_no_dst; - lock_sock(sk) For now, rxpmtu is only the case, but not to miss the future change and a similar bug fixed in commit e27326009a3d ("net: ping6: Fix memleak in ipv6_renew_options()."), let's set a new function to IPv6 sk->sk_destruct() and call inet6_cleanup_sock() there. Since the conversion does not change sk->sk_destruct(), we can guarantee that we can clean up IPv6 resources finally. We can now remove all inet6_destroy_sock() calls from IPv6 protocol specific ->destroy() functions, but such changes are invasive to backport. So they can be posted as a follow-up later for net-next. Fixes: 03485f2adcde ("udpv6: Add lockless sendmsg() support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d38afeec26ed4739c640bf286c270559aab2ba5f upstream.

Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM.  However, commit 03485f2adcde ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:

setsockopt(IPV6_ADDRFORM)                 sendmsg()
+-----------------------+                 +-------+
- do_ipv6_setsockopt(sk, ...)             - udpv6_sendmsg(sk, ...)
  - sockopt_lock_sock(sk)                   ^._ called via udpv6_prot
    - lock_sock(sk)                             before WRITE_ONCE()
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)
  - inet6_destroy_sock()                    - if (!corkreq)
  - sockopt_release_sock(sk)                  - ip6_make_skb(sk, ...)
    - release_sock(sk)                          ^._ lockless fast path for
                                                    the non-corking case

                                                - __ip6_append_data(sk, ...)
                                                  - ipv6_local_rxpmtu(sk, ...)
                                                    - xchg(&np->rxpmtu, skb)
                                                      ^._ rxpmtu is never freed.

                                                - goto out_no_dst;

                                            - lock_sock(sk)

For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a3d ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there.  Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.

We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport.  So they can be posted as a follow-up later for net-next.

Fixes: 03485f2adcde ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>