linux-stable.git/net/ipv4, branch v4.9.9

net: Specify the owning module for lwtunnel ops

2017-02-04T08:47:11+00:00

[ Upstream commit 88ff7334f25909802140e690c0e16433e485b0a0 ]

Modules implementing lwtunnel ops should not be allowed to unload
while there is state alive using those ops, so specify the owning
module for all lwtunnel ops.

Signed-off-by: Robert Shearman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: initialize max window for a new fastopen socket

2017-02-04T08:47:10+00:00

[ Upstream commit 0dbd7ff3ac5017a46033a9d0a87a8267d69119d9 ]

Found that if we run LTP netstress test with large MSS (65K),
the first attempt from server to send data comparable to this
MSS on fastopen connection will be delayed by the probe timer.

Here is an example:

     < S  seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32
     > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0
     < .  ack 1 win 342 length 0

Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now',
as well as in 'size_goal'. This results the segment not queued for
transmition until all the data copied from user buffer. Then, inside
__tcp_push_pending_frames(), it breaks on send window test and
continues with the check probe timer.

Fragmentation occurs in tcp_write_wakeup()...

+0.2 > P. seq 1:43777 ack 1 win 342 length 43776
     < .  ack 43777, win 1365 length 0
     > P. seq 43777:65001 ack 1 win 342 options [...] length 21224
     ...

This also contradicts with the fact that we should bound to the half
of the window if it is large.

Fix this flaw by correctly initializing max_window. Before that, it
could have large values that affect further calculations of 'size_goal'.

Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Alexey Kodanev 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

lwtunnel: fix autoload of lwt modules

2017-02-04T08:47:10+00:00

[ Upstream commit 9ed59592e3e379b2e9557dc1d9e9ec8fcbb33f16]

Trying to add an mpls encap route when the MPLS modules are not loaded
hangs. For example:

    CONFIG_MPLS=y
    CONFIG_NET_MPLS_GSO=m
    CONFIG_MPLS_ROUTING=m
    CONFIG_MPLS_IPTUNNEL=m

    $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

The ip command hangs:
root       880   826  0 21:25 pts/0    00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

    $ cat /proc/880/stack
    [] call_usermodehelper_exec+0xd6/0x134
    [] __request_module+0x27b/0x30a
    [] lwtunnel_build_state+0xe4/0x178
    [] fib_create_info+0x47f/0xdd4
    [] fib_table_insert+0x90/0x41f
    [] inet_rtm_newroute+0x4b/0x52
    ...

modprobe is trying to load rtnl-lwt-MPLS:

root       881     5  0 21:25 ?        00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS

and it hangs after loading mpls_router:

    $ cat /proc/881/stack
    [] rtnl_lock+0x12/0x14
    [] register_netdevice_notifier+0x16/0x179
    [] mpls_init+0x25/0x1000 [mpls_router]
    [] do_one_initcall+0x8e/0x13f
    [] do_init_module+0x5a/0x1e5
    [] load_module+0x13bd/0x17d6
    ...

The problem is that lwtunnel_build_state is called with rtnl lock
held preventing mpls_init from registering.

Given the potential references held by the time lwtunnel_build_state it
can not drop the rtnl lock to the load module. So, extract the module
loading code from lwtunnel_build_state into a new function to validate
the encap type. The new function is called while converting the user
request into a fib_config which is well before any table, device or
fib entries are examined.

Fixes: 745041e2aaf1 ("lwtunnel: autoload of lwt modules")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_fastopen unaligned access complaints on sparc

2017-02-04T08:47:09+00:00

[ Upstream commit 003c941057eaa868ca6fedd29a274c863167230d ]

Fix up a data alignment issue on sparc by swapping the order
of the cookie byte array field with the length field in
struct tcp_fastopen_cookie, and making it a proper union
to clean up the typecasting.

This addresses log complaints like these:
    log_unaligned: 113 callbacks suppressed
    Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360
    Kernel unaligned access at TPC[9764ac] tcp_try_fastopen+0x2ec/0x360
    Kernel unaligned access at TPC[9764c8] tcp_try_fastopen+0x308/0x360
    Kernel unaligned access at TPC[9764e4] tcp_try_fastopen+0x324/0x360
    Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360

Cc: Eric Dumazet 
Signed-off-by: Shannon Nelson 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: fix table id in getroute response

2017-02-04T08:47:08+00:00

[ Upstream commit 8a430ed50bb1b19ca14a46661f3b1b35f2fb5c39 ]

rtm_table is an 8-bit field while table ids are allowed up to u32. Commit
709772e6e065 ("net: Fix routing tables with id > 255 for legacy software")
added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the
table id is > 255. The table id returned on get route requests should do
the same.

Fixes: c36ba6603a11 ("net: Allow user to get table id from route lookup")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: lwtunnel: Handle lwtunnel_fill_encap failure

2017-02-04T08:47:08+00:00

[ Upstream commit ea7a80858f57d8878b1499ea0f1b8a635cc48de7 ]

Handle failure in lwtunnel_fill_encap adding attributes to skb.

Fixes: 571e722676fe ("ipv4: support for fib route lwtunnel encap attributes")
Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: Fix multipath selection with vrf

2017-01-15T12:42:55+00:00

[ Upstream commit 7a18c5b9fb31a999afc62b0e60978aa896fc89e9 ]

fib_select_path does not call fib_select_multipath if oif is set in the
flow struct. For VRF use cases oif is always set, so multipath route
selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif
check similar to what is done in fib_table_lookup.

Add saddr and proto to the flow struct for the fib lookup done by the
VRF driver to better match hash computation for a flow.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules

2017-01-15T12:42:54+00:00

[ Upstream commit 5350d54f6cd12eaff623e890744c79b700bd3f17 ]

In the case of custom rules being present we need to handle the case of the
LOCAL table being intialized after the new rule has been added.  To address
that I am adding a new check so that we can make certain we don't use an
alias of MAIN for LOCAL when allocating a new table.

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Oliver Brunel 
Signed-off-by: Alexander Duyck 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

igmp: Make igmp group member RFC 3376 compliant

2017-01-15T12:42:54+00:00

[ Upstream commit 7ababb782690e03b78657e27bd051e20163af2d6 ]

5.2. Action on Reception of a Query

 When a system receives a Query, it does not respond immediately.
 Instead, it delays its response by a random amount of time, bounded
 by the Max Resp Time value derived from the Max Resp Code in the
 received Query message.  A system may receive a variety of Queries on
 different interfaces and of different kinds (e.g., General Queries,
 Group-Specific Queries, and Group-and-Source-Specific Queries), each
 of which may require its own delayed response.

 Before scheduling a response to a Query, the system must first
 consider previously scheduled pending responses and in many cases
 schedule a combined response.  Therefore, the system must be able to
 maintain the following state:

 o A timer per interface for scheduling responses to General Queries.

 o A per-group and interface timer for scheduling responses to Group-
   Specific and Group-and-Source-Specific Queries.

 o A per-group and interface list of sources to be reported in the
   response to a Group-and-Source-Specific Query.

 When a new Query with the Router-Alert option arrives on an
 interface, provided the system has state to report, a delay for a
 response is randomly selected in the range (0, [Max Resp Time]) where
 Max Resp Time is derived from Max Resp Code in the received Query
 message.  The following rules are then used to determine if a Report
 needs to be scheduled and the type of Report to schedule.  The rules
 are considered in order and only the first matching rule is applied.

 1. If there is a pending response to a previous General Query
    scheduled sooner than the selected delay, no additional response
    needs to be scheduled.

 2. If the received Query is a General Query, the interface timer is
    used to schedule a response to the General Query after the
    selected delay.  Any previously pending response to a General
    Query is canceled.
--8<--

Currently the timer is rearmed with new random expiration time for
every incoming query regardless of possibly already pending report.
Which is not aligned with the above RFE.
It also might happen that higher rate of incoming queries can
postpone the report after the expiration time of the first query
causing group membership loss.

Now the per interface general query timer is rearmed only
when there is no pending report already scheduled on that interface or
the newly selected expiration time is before the already pending
scheduled report.

Signed-off-by: Michal Tesar 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: dst for local input routes should use l3mdev if relevant

2017-01-15T12:42:54+00:00

[ Upstream commit f5a0aab84b74de68523599817569c057c7ac1622 ]

IPv4 output routes already use l3mdev device instead of loopback for dst's
if it is applicable. Change local input routes to do the same.

This fixes icmp responses for unreachable UDP ports which are directed
to the wrong table after commit 9d1a6c4ea43e4 because local_input
routes use the loopback device. Moving from ingress device to loopback
loses the L3 domain causing responses based on the dst to get to lost.

Fixes: 9d1a6c4ea43e4 ("net: icmp_route_lookup should use rt dev to
		       determine L3 domain")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman