linux-stable.git/net/ipv4, branch v4.4.252

net: fix pmtu check in nopmtudisc mode

2021-01-17T12:55:13+00:00

[ Upstream commit 50c661670f6a3908c273503dfa206dfc7aa54c07 ]

For some reason ip_tunnel insist on setting the DF bit anyway when the
inner header has the DF bit set, EVEN if the tunnel was configured with
'nopmtudisc'.

This means that the script added in the previous commit
cannot be made to work by adding the 'nopmtudisc' flag to the
ip tunnel configuration. Doing so breaks connectivity even for the
without-conntrack/netfilter scenario.

When nopmtudisc is set, the tunnel will skip the mtu check, so no
icmp error is sent to client. Then, because inner header has DF set,
the outer header gets added with DF bit set as well.

IP stack then sends an error to itself because the packet exceeds
the device MTU.

Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.")
Cc: Stefano Brivio 
Signed-off-by: Florian Westphal 
Acked-by: Pablo Neira Ayuso 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: ip: always refragment ip defragmented packets

2021-01-17T12:55:13+00:00

[ Upstream commit bb4cc1a18856a73f0ff5137df0c2a31f4c50f6cf ]

Conntrack reassembly records the largest fragment size seen in IPCB.
However, when this gets forwarded/transmitted, fragmentation will only
be forced if one of the fragmented packets had the DF bit set.

In that case, a flag in IPCB will force fragmentation even if the
MTU is large enough.

This should work fine, but this breaks with ip tunnels.
Consider client that sends a UDP datagram of size X to another host.

The client fragments the datagram, so two packets, of size y and z, are
sent. DF bit is not set on any of these packets.

Middlebox netfilter reassembles those packets back to single size-X
packet, before routing decision.

packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit
isn't set.  At output time, ip refragmentation is skipped as well
because x is still smaller than the mtu of the output device.

If ttransmit device is an ip tunnel, the packet size increases to
x+overhead.

Also, tunnel might be configured to force DF bit on outer header.

In this case, packet will be dropped (exceeds MTU) and an ICMP error is
generated back to sender.

But sender already respects the announced MTU, all the packets that
it sent did fit the announced mtu.

Force refragmentation as per original sizes unconditionally so ip tunnel
will encapsulate the fragments instead.

The only other solution I see is to place ip refragmentation in
the ip_tunnel code to handle this case.

Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet")
Reported-by: Christian Perle 
Signed-off-by: Florian Westphal 
Acked-by: Pablo Neira Ayuso 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()

2021-01-12T18:47:54+00:00

[ Upstream commit 21fdca22eb7df2a1e194b8adb812ce370748b733 ]

RT_TOS() only clears one of the ECN bits. Therefore, when
fib_compute_spec_dst() resorts to a fib lookup, it can return
different results depending on the value of the second ECN bit.

For example, ECT(0) and ECT(1) packets could be treated differently.

  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up

  $ ip -netns ns0 address add 192.0.2.10/24 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/24 dev veth10

  $ ip -netns ns1 address add 192.0.2.21/32 dev lo
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21
  $ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0

With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21
(ping uses -Q to set all TOS and ECN bits):

  $ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms

But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11
because the "tos 4" route isn't matched:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms

After this patch the ECN bits don't affect the result anymore:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms

Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.")
Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix cwnd-limited bug for TSO deferral where we send nothing

2020-12-29T12:42:32+00:00

[ Upstream commit 299bcb55ecd1412f6df606e9dc0912d55610029e ]

When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:

(1) ACK for full-sized skb of N*MSS arrives
  -> tcp_write_xmit() transmit full-sized skb with N*MSS
  -> move pacing release time forward
  -> exit tcp_write_xmit() because pacing time is in the future

(2) TSQ callback or TCP internal pacing timer fires
  -> try to transmit next skb, but TSO deferral finds remainder of
     available cwnd is not big enough to trigger an immediate send
     now, so we defer sending until the next ACK.

(3) repeat...

So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:

o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.

o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.

Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Reported-by: Ingemar Johansson 
Signed-off-by: Neal Cardwell 
Signed-off-by: Yuchung Cheng 
Acked-by: Soheil Hassas Yeganeh 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: Update window_clamp if SOCK_RCVBUF is set

2020-11-18T17:25:02+00:00

[ Upstream commit 909172a149749242990a6e64cb55d55460d4e417 ]

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

icmp: randomize the global rate limiter

2020-10-29T08:03:01+00:00

[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ]

Keyu Man reported that the ICMP rate limiter could be used
by attackers to get useful signal. Details will be provided
in an upcoming academic publication.

Our solution is to add some noise, so that the attackers
no longer can get help from the predictable token bucket limiter.

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet 
Reported-by: Keyu Man 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tcp: fix to update snd_wl1 in bulk receiver fast path

2020-10-29T08:03:01+00:00

[ Upstream commit 18ded910b589839e38a51623a179837ab4cc3789 ]

In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
   after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.

This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell 
Reported-by: Apollon Oikonomopoulos 
Tested-by: Apollon Oikonomopoulos 
Link: https://www.spinics.net/lists/netdev/msg692430.html
Acked-by: Soheil Hassas Yeganeh 
Acked-by: Yuchung Cheng 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

rt_cpu_seq_next should increase position index

2020-10-01T09:11:51+00:00

[ Upstream commit a3ea86739f1bc7e121d921842f0f4a8ab1af94d9 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ip: fix tos reflection in ack and reset packets

2020-10-01T09:11:50+00:00

[ Upstream commit ba9e04a7ddf4f22a10e05bf9403db6b97743c7bf ]

Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we
echo the TOS value of the received packets in the response.
However, we do not want to echo the lower 2 ECN bits in accordance
with RFC 3168 6.1.5 robustness principles.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by: Wei Wang 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: initialize fastreuse on inet_inherit_port

2020-09-12T09:45:31+00:00

commit d76f3351cea2d927fdf70dd7c06898235035e84e upstream.

In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or
SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind
behaviour or in the incorrect reuse of a bind.

the kernel keeps track for each bind_bucket if all sockets in the
bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags.
These flags allow skipping the costly bind_conflict check when possible
(meaning when all sockets have the proper SO_REUSE option).

For every socket added to a bind_bucket, these flags need to be updated.
As soon as a socket that does not support reuse is added, the flag is
set to false and will never go back to true, unless the bind_bucket is
deleted.

Note that there is no mechanism to re-evaluate these flags when a socket
is removed (this might make sense when removing a socket that would not
allow reuse; this leaves room for a future patch).

For this optimization to work, it is mandatory that these flags are
properly initialized and updated.

When a child socket is created from a listen socket in
__inet_inherit_port, the TPROXY case could create a new bind bucket
without properly initializing these flags, thus preventing the
optimization to work. Alternatively, a socket not allowing reuse could
be added to an existing bind bucket without updating the flags, causing
bind_conflict to never be called as it should.

Call inet_csk_update_fastreuse when __inet_inherit_port decides to create
a new bind_bucket or use a different bind_bucket than the one of the
listen socket.

Fixes: 093d282321da ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()")
Acked-by: Matthieu Baerts
Signed-off-by: Tim Froidcoeur
Signed-off-by: David S. Miller
Signed-off-by: Tim Froidcoeur
Signed-off-by: Greg Kroah-Hartman