linux-stable.git/net/ipv4, branch v4.14.28

netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation

2018-03-15T09:54:23+00:00

commit b3e456fce9f51d6276e576d00271e2813c1b8b67 upstream.

There is a race condition between clusterip_config_entry_put()
and clusterip_config_init(), after we release the spinlock in
clusterip_config_entry_put(), a new proc file with a same IP could
be created immediately since it is already removed from the configs
list, therefore it triggers this warning:

------------[ cut here ]------------
proc_dir_entry 'ipt_CLUSTERIP/172.20.0.170' already registered
WARNING: CPU: 1 PID: 4152 at fs/proc/generic.c:330 proc_register+0x2a4/0x370 fs/proc/generic.c:329
Kernel panic - not syncing: panic_on_warn set ...

As a quick fix, just move the proc_remove() inside the spinlock.

Reported-by: 
Fixes: 6c5d5cfbe3c5 ("netfilter: ipt_CLUSTERIP: check duplicate config when initializing")
Tested-by: Paolo Abeni 
Cc: Xin Long 
Cc: Pablo Neira Ayuso 
Signed-off-by: Cong Wang 
Reviewed-by: Xin Long 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

netfilter: add back stackpointer size checks

2018-03-15T09:54:23+00:00

commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream.

The rationale for removing the check is only correct for rulesets
generated by ip(6)tables.

In iptables, a jump can only occur to a user-defined chain, i.e.
because we size the stack based on number of user-defined chains we
cannot exceed stack size.

However, the underlying binary format has no such restriction,
and the validation step only ensures that the jump target is a
valid rule start point.

IOW, its possible to build a rule blob that has no user-defined
chains but does contain a jump.

If this happens, no jump stack gets allocated and crash occurs
because no jumpstack was allocated.

Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset")
Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

tcp: purge write queue upon RST

2018-03-09T06:41:17+00:00

[ Upstream commit a27fd7a8ed3856faaf5a2ff1c8c5f00c0667aaa0 ]

When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.

RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07

Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh 
Reviewed-by: Eric Dumazet 
Signed-off-by: Yuchung Cheng 
Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: Set addr_type in hash_keys for forwarded case

2018-03-09T06:41:15+00:00

[ Upstream commit 1fe4b1184c2ae2bfbf9e8b14c9c0c1945c98f205 ]

The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.

Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel 
Signed-off-by: David Ahern 
Acked-by: Nikolay Aleksandrov 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: revert F-RTO extension to detect more spurious timeouts

2018-03-09T06:41:14+00:00

[ Upstream commit fc68e171d376c322e6777a3d7ac2f0278b68b17f ]

This reverts commit 89fe18e44f7ee5ab1c90d0dff5835acee7751427.

While the patch could detect more spurious timeouts, it could cause
poor TCP performance on broken middle-boxes that modifies TCP packets
(e.g. receive window, SACK options). Since the performance gain is
much smaller compared to the potential loss. The best solution is
to fully revert the change.

Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts")
Reported-by: Teodor Milkov 
Signed-off-by: Yuchung Cheng 
Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: revert F-RTO middle-box workaround

2018-03-09T06:41:14+00:00

[ Upstream commit d4131f09770d9b7471c9da65e6ecd2477746ac5c ]

This reverts commit cc663f4d4c97b7297fb45135ab23cfd508b35a77. While fixing
some broken middle-boxes that modifies receive window fields, it does not
address middle-boxes that strip off SACK options. The best solution is
to fully revert this patch and the root F-RTO enhancement.

Fixes: cc663f4d4c97 ("tcp: restrict F-RTO to work-around broken middle-boxes")
Reported-by: Teodor Milkov 
Signed-off-by: Yuchung Cheng 
Signed-off-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp_bbr: better deal with suboptimal GSO

2018-03-09T06:41:13+00:00

[ Upstream commit 350c9f484bde93ef229682eedd98cd5f74350f7f ]

BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :

/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;

But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)

What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.

So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.

To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs

Only tcp_tso_segs() has to enforce the gso_max_segs limit.

Tested:

ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast

Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
    691  (ss -temoi shows cwnd is stuck around 6 )
    667
    651
    631
    517

After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
   1733 (ss -temoi shows cwnd is around 386 )
   1778
   1746
   1781
   1718

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Eric Dumazet 
Reported-by: Oleksandr Natalenko 
Acked-by: Neal Cardwell 
Acked-by: Soheil Hassas Yeganeh 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: Honor the eor bit in tcp_mtu_probe

2018-03-09T06:41:12+00:00

[ Upstream commit 808cf9e38cd7923036a99f459ccc8cf2955e47af ]

Avoid SKB coalescing if eor bit is set in one of the relevant
SKBs.

Fixes: c134ecb87817 ("tcp: Make use of MSG_EOR in tcp_sendmsg")
Signed-off-by: Ilya Lesokhin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

udplite: fix partial checksum initialization

2018-03-09T06:41:10+00:00

[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]

Since UDP-Lite is always using checksum, the following path is
triggered when calculating pseudo header for it:

  udp4_csum_init() or udp6_csum_init()
    skb_checksum_init_zero_check()
      __skb_checksum_validate_complete()

The problem can appear if skb->len is less than CHECKSUM_BREAK. In
this particular case __skb_checksum_validate_complete() also invokes
__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
that covers only part of a packet, the function will return bad
checksum and the packet will be dropped.

It can be fixed if we skip skb_checksum_init_zero_check() and only
set the required pseudo header checksum for UDP-Lite with partial
checksum before udp4_csum_init()/udp6_csum_init() functions return.

Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4")
Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6")
Signed-off-by: Alexey Kodanev 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68

2018-03-09T06:41:09+00:00

[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]

According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:

    A host MUST never reduce its estimate of the Path MTU below 68
    octets.

and (talking about ICMP frag-needed's Next-Hop MTU field):

    This field will never contain a value less than 68, since every
    router "must be able to forward a datagram of 68 octets without
    fragmentation".

Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.

Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.

Reported-by: Jianlin Shi 
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Stefano Brivio 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman