linux-stable.git/net/ipv4, branch v3.2.62

netfilter: ipt_ULOG: fix info leaks

2014-08-06T17:07:40+00:00

commit 278f2b3e2af5f32ea1afe34fa12a2518153e6e49 upstream.

The ulog messages leak heap bytes by the means of padding bytes and
incompletely filled string arrays. Fix those by memset(0)'ing the
whole struct before filling it.

Signed-off-by: Mathias Krause 
Signed-off-by: Pablo Neira Ayuso 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ipv4: fix buffer overflow in ip_options_compile()

2014-08-06T17:07:39+00:00

[ Upstream commit 10ec9472f05b45c94db3c854d22581a20b97db41 ]

There is a benign buffer overflow in ip_options_compile spotted by
AddressSanitizer[1] :

Its benign because we always can access one extra byte in skb->head
(because header is followed by struct skb_shared_info), and in this case
this byte is not even used.

[28504.910798] ==================================================================
[28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile
[28504.913170] Read of size 1 by thread T15843:
[28504.914026]  [] ip_options_compile+0x121/0x9c0
[28504.915394]  [] ip_options_get_from_user+0xad/0x120
[28504.916843]  [] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.918175]  [] ip_setsockopt+0x30/0xa0
[28504.919490]  [] tcp_setsockopt+0x5b/0x90
[28504.920835]  [] sock_common_setsockopt+0x5f/0x70
[28504.922208]  [] SyS_setsockopt+0xa2/0x140
[28504.923459]  [] system_call_fastpath+0x16/0x1b
[28504.924722]
[28504.925106] Allocated by thread T15843:
[28504.925815]  [] ip_options_get_from_user+0x35/0x120
[28504.926884]  [] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.927975]  [] ip_setsockopt+0x30/0xa0
[28504.929175]  [] tcp_setsockopt+0x5b/0x90
[28504.930400]  [] sock_common_setsockopt+0x5f/0x70
[28504.931677]  [] SyS_setsockopt+0xa2/0x140
[28504.932851]  [] system_call_fastpath+0x16/0x1b
[28504.934018]
[28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right
[28504.934377]  of 40-byte region [ffff880026382800, ffff880026382828)
[28504.937144]
[28504.937474] Memory state around the buggy address:
[28504.938430]  ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr
[28504.939884]  ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.941294]  ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.942504]  ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.943483]  ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.945573]                         ^
[28504.946277]  ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.094949]  ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.096114]  ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.097116]  ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.098472]  ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.099804] Legend:
[28505.100269]  f - 8 freed bytes
[28505.100884]  r - 8 redzone bytes
[28505.101649]  . - 8 allocated bytes
[28505.102406]  x=1..7 - x allocated bytes + (8-x) redzone bytes
[28505.103637] ==================================================================

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

igmp: fix the problem when mc leave group

2014-08-06T17:07:38+00:00

[ Upstream commit 52ad353a5344f1f700c5b777175bdfa41d3cd65a ]

The problem was triggered by these steps:

1) create socket, bind and then setsockopt for add mc group.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("192.168.1.2");
   setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));

2) drop the mc group for this socket.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("0.0.0.0");
   setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));

3) and then drop the socket, I found the mc group was still used by the dev:

   netstat -g

   Interface       RefCnt Group
   --------------- ------ ---------------------
   eth2		   1	  255.0.0.37

Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need
to be released for the netdev when drop the socket, but this process was broken when
route default is NULL, the reason is that:

The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr
is NULL, the default route dev will be chosen, then the ifindex is got from the dev,
then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL,
the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be
released from the mc_list, but the dev didn't dec the refcnt for this mc group, so
when dropping the socket, the mc_list is NULL and the dev still keep this group.

v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs,
	so I add the checking for the in_dev before polling the mc_list, make sure when
	we remove the mc group, dec the refcnt to the real dev which was using the mc address.
	The problem would never happened again.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

tcp: fix tcp_match_skb_to_sack() for unaligned SACK at end of an skb

2014-08-06T17:07:38+00:00

[ Upstream commit 2cd0d743b05e87445c54ca124a9916f22f16742e ]

If there is an MSS change (or misbehaving receiver) that causes a SACK
to arrive that covers the end of an skb but is less than one MSS, then
tcp_match_skb_to_sack() was rounding up pkt_len to the full length of
the skb ("Round if necessary..."), then chopping all bytes off the skb
and creating a zero-byte skb in the write queue.

This was visible now because the recently simplified TLP logic in
bef1909ee3ed1c ("tcp: fixing TLP's FIN recovery") could find that 0-byte
skb at the end of the write queue, and now that we do not check that
skb's length we could send it as a TLP probe.

Consider the following example scenario:

 mss: 1000
 skb: seq: 0 end_seq: 4000  len: 4000
 SACK: start_seq: 3999 end_seq: 4000

The tcp_match_skb_to_sack() code will compute:

 in_sack = false
 pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999
 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000
 new_len += mss = 4000

Previously we would find the new_len > skb->len check failing, so we
would fall through and set pkt_len = new_len = 4000 and chop off
pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment
afterward in the write queue.

With this new commit, we notice that the new new_len >= skb->len check
succeeds, so that we return without trying to fragment.

Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries")
Reported-by: Eric Dumazet 
Signed-off-by: Neal Cardwell 
Cc: Eric Dumazet 
Cc: Yuchung Cheng 
Cc: Ilpo Jarvinen 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

Revert "net: ip, ipv6: handle gso skbs in forwarding path"

2014-08-06T17:07:31+00:00

This reverts commit caa5344994778a2b4725b2d75c74430f76925e4a, which
was commit fe6cc55f3a9a053482a76f5a6b2257cee51b4663 upstream.  In 3.2,
the transport header length is not calculated in the forwarding path,
so skb_gso_network_seglen() returns an incorrect result.  We also have
problems due to the local_df flag not being set correctly.

Signed-off-by: Ben Hutchings

Revert "net: ipv4: ip_forward: fix inverted local_df test"

2014-08-06T17:07:31+00:00

This reverts commit 59d9f389df3cdf72833d5ee17c3fe959b6bdc792, which
was commit ca6c5d4ad216d5942ae544bbf02503041bd802aa upstream.  It is a
valid fix, but depends on sk_buff::local_df being set in all the right
cases, which it wasn't in 3.2.  We need to defer it unless and until
the other fixes are also backported to 3.2.y.

Signed-off-by: Ben Hutchings

net: tunnels - enable module autoloading

2014-07-11T12:33:57+00:00

[ Upstream commit f98f89a0104454f35a62d681683c844f6dbf4043 ]

Enable the module alias hookup to allow tunnel modules to be autoloaded on demand.

This is in line with how most other netdev kinds work, and will allow userspace
to create tunnels without having CAP_SYS_MODULE.

Signed-off-by: Tom Gundersen 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ipv4: initialise the itag variable in __mkroute_input

2014-06-09T12:29:00+00:00

[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ]

the value of itag is a random value from stack, and may not be initiated by
fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID
is not set

This will make the cached dst uncertainty

Signed-off-by: Li RongQing 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ipv4: fib_semantics: increment fib_info_cnt after fib_info allocation

2014-06-09T12:28:59+00:00

[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ]

Increment fib_info_cnt in fib_create_info() right after successfuly
alllocating fib_info structure, overwise fib_metrics allocation failure
leads to fib_info_cnt incorrectly decremented in free_fib_info(), called
on error path from fib_create_info().

Signed-off-by: Sergey Popovich 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: ipv4: ip_forward: fix inverted local_df test

2014-06-09T12:28:58+00:00

[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ]

local_df means 'ignore DF bit if set', so if its set we're
allowed to perform ip fragmentation.

This wasn't noticed earlier because the output path also drops such skbs
(and emits needed icmp error) and because netfilter ip defrag did not
set local_df until couple of days ago.

Only difference is that DF-packets-larger-than MTU now discarded
earlier (f.e. we avoid pointless netfilter postrouting trip).

While at it, drop the repeated test ip_exceeds_mtu, checking it once
is enough...

Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path")
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings