linux-stable.git/net/ipv4, branch v3.14.8

netfilter: ipv4: defrag: set local_df flag on defragmented skb

2014-06-16T20:40:32+00:00

commit 895162b1101b3ea5db08ca6822ae9672717efec0 upstream.

else we may fail to forward skb even if original fragments do fit
outgoing link mtu:

1. remote sends 2k packets in two 1000 byte frags, DF set
2. we want to forward but only see '2k > mtu and DF set'
3. we then send icmp error saying that outgoing link is 1500

But original sender never sent a packet that would not fit
the outgoing link.

Setting local_df makes outgoing path test size vs.
IPCB(skb)->frag_max_size, so we will still send the correct
error in case the largest original size did not fit
outgoing link mtu.

Reported-by: Maxime Bizon 
Suggested-by: Maxime Bizon 
Fixes: 5f2d04f1f9 (ipv4: fix path MTU discovery with connection tracking)
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

ipv4: initialise the itag variable in __mkroute_input

2014-05-31T20:20:39+00:00

[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ]

the value of itag is a random value from stack, and may not be initiated by
fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID
is not set

This will make the cached dst uncertainty

Signed-off-by: Li RongQing 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip_tunnel: Initialize the fallback device properly

2014-05-31T20:20:39+00:00

[ Upstream commit 78ff4be45a4c51d8fb21ad92e4fabb467c6c3eeb ]

We need to initialize the fallback device to have a correct mtu
set on this device. Otherwise the mtu is set to null and the device
is unusable.

Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.")
Cc: Pravin B Shelar 
Signed-off-by: Steffen Klassert 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: fib_semantics: increment fib_info_cnt after fib_info allocation

2014-05-31T20:20:37+00:00

[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ]

Increment fib_info_cnt in fib_create_info() right after successfuly
alllocating fib_info structure, overwise fib_metrics allocation failure
leads to fib_info_cnt incorrectly decremented in free_fib_info(), called
on error path from fib_create_info().

Signed-off-by: Sergey Popovich 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: ip_forward: fix inverted local_df test

2014-05-31T20:20:37+00:00

[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ]

local_df means 'ignore DF bit if set', so if its set we're
allowed to perform ip fragmentation.

This wasn't noticed earlier because the output path also drops such skbs
(and emits needed icmp error) and because netfilter ip defrag did not
set local_df until couple of days ago.

Only difference is that DF-packets-larger-than MTU now discarded
earlier (f.e. we avoid pointless netfilter postrouting trip).

While at it, drop the repeated test ip_exceeds_mtu, checking it once
is enough...

Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path")
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: ip_tunnels: disable cache for nbma gre tunnels

2014-05-31T20:20:36+00:00

[ Upstream commit 22fb22eaebf4d16987f3fd9c3484c436ee0badf2 ]

The connected check fails to check for ip_gre nbma mode tunnels
properly. ip_gre creates temporary tnl_params with daddr specified
to pass-in the actual target on per-packet basis from neighbor
layer. Detect these tunnels by inspecting the actual tunnel
configuration.

Minimal test case:
 ip route add 192.168.1.1/32 via 10.0.0.1
 ip route add 192.168.1.2/32 via 10.0.0.2
 ip tunnel add nbma0 mode gre key 1 tos c0
 ip addr add 172.17.0.0/16 dev nbma0
 ip link set nbma0 up
 ip neigh add 172.17.0.1 lladdr 192.168.1.1 dev nbma0
 ip neigh add 172.17.0.2 lladdr 192.168.1.2 dev nbma0
 ping 172.17.0.1
 ping 172.17.0.2

The second ping should be going to 192.168.1.2 and head 10.0.0.2;
but cached gre tunnel level route is used and it's actually going
to 192.168.1.1 via 10.0.0.1.

The lladdr's need to go to separate dst for the bug to trigger.
Test case uses separate route entries, but this can also happen
when the route entry is same: if there is a nexthop exception or
the GRE tunnel is IPsec'ed in which case the dst points to xfrm
bundle unique to the gre lladdr.

Fixes: 7d442fab0a67 ("ipv4: Cache dst in tunnels")
Signed-off-by: Timo Teräs 
Cc: Tom Herbert 
Cc: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip_tunnel: Set network header properly for IP_ECN_decapsulate()

2014-05-31T20:20:36+00:00

[ Upstream commit e96f2e7c430014eff52c93cabef1ad4f42ed0db1 ]

In ip_tunnel_rcv(), set skb->network_header to inner IP header
before IP_ECN_decapsulate().

Without the fix, IP_ECN_decapsulate() takes outer IP header as
inner IP header, possibly causing error messages or packet drops.

Note that this skb_reset_network_header() call was in this spot when
the original feature for checking consistency of ECN bits through
tunnels was added in eccc1bb8d4b4 ("tunnel: drop packet if ECN present
with not-ECT"). It was only removed from this spot in 3d7b46cd20e3
("ip_tunnel: push generic protocol handling to ip_tunnel module.").

Fixes: 3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module.")
Reported-by: Neal Cardwell 
Signed-off-by: Ying Cai 
Acked-by: Neal Cardwell 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp_cubic: fix the range of delayed_ack

2014-05-31T20:20:36+00:00

[ Upstream commit 0cda345d1b2201dd15591b163e3c92bad5191745 ]

commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent
divide error) try to prevent divide error, but there is still a little
chance that delayed_ack can reach zero. In case the param cnt get
negative value, then ratio+cnt would overflow and may happen to be zero.
As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero.

In some old kernels, such as 2.6.32, there is a bug that would
pass negative param, which then ultimately leads to this divide error.

commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count
with skb MSS) fixed the negative param issue. However,
it's safe that we fix the range of delayed_ack as well,
to make sure we do not hit a divide by zero.

CC: Stephen Hemminger 
Signed-off-by: Liu Yu 
Signed-off-by: Eric Dumazet 
Acked-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: return valid RTA_IIF on ip route get

2014-05-31T20:20:33+00:00

[ Upstream commit 91146153da2feab18efab2e13b0945b6bb704ded ]

Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37
("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid
RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0
which is displayed as 'iif *'.

inet_iif is not appropriate to use because skb_iif is not set.
Use the skb->dev->ifindex instead.

Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv4: current group_info should be put after using.

2014-05-31T20:20:33+00:00

[ Upstream commit b04c46190219a4f845e46a459e3102137b7f6cac ]

Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.

Signed-off-by: Chuansheng Liu 
Signed-off-by: Zhang Dongxing 
Signed-off-by: xiaoming wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman