linux-stable.git/net/ipv4/ip_output.c, branch linux-3.10.y

udp: consistently apply ufo or fragmentation

2017-11-01T21:12:41+00:00

commit 85f1bd9a7b5a79d5baa8bf44af19658f7bf77bfa upstream.

When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.

Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.

Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.

A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.

Found by syzkaller.

[gregkh - tweaks for 3.18 for ipv6, hopefully they are correct...]
[wt: s/skb_is_gso/skb_has_frags for 3.10]

Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Willy Tarreau

ipv4: Set skb->protocol properly for local output

2017-02-10T10:03:57+00:00

commit f4180439109aa720774baafdd798b3234ab1a0d2 upstream.

When xfrm is applied to TSO/GSO packets, it follows this path:

    xfrm_output() -> xfrm_output_gso() -> skb_gso_segment()

where skb_gso_segment() relies on skb->protocol to function properly.

This patch sets skb->protocol to ETH_P_IP before dst_output() is called,
fixing a bug where GSO packets sent through a sit tunnel are dropped
when xfrm is involved.

Signed-off-by: Eli Cooper 
Signed-off-by: David S. Miller 
Signed-off-by: Willy Tarreau

udp: only allow UFO for packets from SOCK_DGRAM sockets

2015-03-18T12:22:27+00:00

[ Upstream commit acf8dd0a9d0b9e4cdb597c2f74802f79c699e802 ]

If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb->csum_start and skb->csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.

Signed-off-by: Michal Kubecek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: tcp: get rid of ugly unicast_sock

2015-02-27T01:48:48+00:00

[ Upstream commit bdbbb8527b6f6a358dbcb70dac247034d665b8e4 ]

In commit be9f4a44e7d41 ("ipv4: tcp: remove per net tcp_sock")
I tried to address contention on a socket lock, but the solution
I chose was horrible :

commit 3a7c384ffd57e ("ipv4: tcp: unicast_sock should not land outside
of TCP stack") addressed a selinux regression.

commit 0980e56e506b ("ipv4: tcp: set unicast_sock uc_ttl to -1")
took care of another regression.

commit b5ec8eeac46 ("ipv4: fix ip_send_skb()") fixed another regression.

commit 811230cd85 ("tcp: ipv4: initialize unicast_sock sk_pacing_rate")
was another shot in the dark.

Really, just use a proper socket per cpu, and remove the skb_orphan()
call, to re-enable flow control.

This solves a serious problem with FQ packet scheduler when used in
hostile environments, as we do not want to allocate a flow structure
for every RST packet sent in response to a spoofed packet.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: ipv4: initialize unicast_sock sk_pacing_rate

2015-02-27T01:48:48+00:00

[ Upstream commit 811230cd853d62f09ed0addd0ce9a1b9b0e13fb5 ]

When I added sk_pacing_rate field, I forgot to initialize its value
in the per cpu unicast_sock used in ip_send_unicast_reply()

This means that for sch_fq users, RST packets, or ACK packets sent
on behalf of TIME_WAIT sockets might be sent to slowly or even dropped
once we reach the per flow limit.

Signed-off-by: Eric Dumazet 
Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: dst_entry leak in ip_send_unicast_reply()

2014-11-14T16:47:53+00:00

[ Upstream commit 4062090e3e5caaf55bed4523a69f26c3265cc1d2 ]

ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork
and in case errors in __ip_append_data() nobody frees stolen dst entry

Fixes: 2e77d89b2fa8 ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()")
Signed-off-by: Vasily Averin 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

inetpeer: get rid of ip_id_count

2014-08-14T01:24:15+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

inet: fix possible memory corruption with UDP_CORK and UFO

2013-11-04T12:31:05+00:00

[ This is a simplified -stable version of a set of upstream commits. ]

This is a replacement patch only for stable which does fix the problems
handled by the following two commits in -net:

"ip_output: do skb ufo init for peeked non ufo skb as well" (e93b7d748be887cd7639b113ba7d7ef792a7efb9)
"ip6_output: do skb ufo init for peeked non ufo skb as well" (c547dbf55d5f8cf615ccc0e7265e98db27d3fb8b)

Three frames are written on a corked udp socket for which the output
netdevice has UFO enabled.  If the first and third frame are smaller than
the mtu and the second one is bigger, we enqueue the second frame with
skb_append_datato_frags without initializing the gso fields. This leads
to the third frame appended regulary and thus constructing an invalid skb.

This fixes the problem by always using skb_append_datato_frags as soon
as the first frag got enqueued to the skb without marking the packet
as SKB_GSO_UDP.

The problem with only two frames for ipv6 was fixed by "ipv6: udp
packets following an UFO enqueued packet need also be handled by UFO"
(2811ebac2521ceac84f2bdae402455baa6a7fb47).

Signed-off-by: Hannes Frederic Sowa 
Cc: Jiri Pirko 
Cc: Eric Dumazet 
Cc: David Miller 
Signed-off-by: Greg Kroah-Hartman

ip: generate unique IP identificator if local fragmentation is allowed

2013-10-13T23:08:30+00:00

[ Upstream commit 703133de331a7a7df47f31fb9de51dc6f68a9de8 ]

If local fragmentation is allowed, then ip_select_ident() and
ip_select_ident_more() need to generate unique IDs to ensure
correct defragmentation on the peer.

For example, if IPsec (tunnel mode) has to encrypt large skbs
that have local_df bit set, then all IP fragments that belonged
to different ESP datagrams would have used the same identificator.
If one of these IP fragments would get lost or reordered, then
peer could possibly stitch together wrong IP fragments that did
not belong to the same datagram. This would lead to a packet loss
or data corruption.

Signed-off-by: Ansis Atteka 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip: use ip_hdr() in __ip_make_skb() to retrieve IP header

2013-10-13T23:08:30+00:00

[ Upstream commit 749154aa56b57652a282cbde57a57abc278d1205 ]

skb->data already points to IP header, but for the sake of
consistency we can also use ip_hdr() to retrieve it.

Signed-off-by: Ansis Atteka 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman