linux-stable.git/net/ipv4/ip_input.c, branch v5.4.239

tcp/udp: Make early_demux back namespacified.

2022-11-10T16:57:55+00:00

commit 11052589cf5c0bab3b4884d423d5f60c38fcf25d upstream.

Commit e21145a9871a ("ipv4: namespacify ip_early_demux sysctl knob") made
it possible to enable/disable early_demux on a per-netns basis.  Then, we
introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for
TCP/UDP in commit dddb64bcb346 ("net: Add sysctl to toggle early demux for
tcp and udp").  However, the .proc_handler() was wrong and actually
disabled us from changing the behaviour in each netns.

We can execute early_demux if net.ipv4.ip_early_demux is on and each proto
.early_demux() handler is not NULL.  When we toggle (tcp|udp)_early_demux,
the change itself is saved in each netns variable, but the .early_demux()
handler is a global variable, so the handler is switched based on the
init_net's sysctl variable.  Thus, netns (tcp|udp)_early_demux knobs have
nothing to do with the logic.  Whether we CAN execute proto .early_demux()
is always decided by init_net's sysctl knob, and whether we DO it or not is
by each netns ip_early_demux knob.

This patch namespacifies (tcp|udp)_early_demux again.  For now, the users
of the .early_demux() handler are TCP and UDP only, and they are called
directly to avoid retpoline.  So, we can remove the .early_demux() handler
from inet6?_protos and need not dereference them in ip6?_rcv_finish_core().
If another proto needs .early_demux(), we can restore it at that time.

Fixes: dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp")
Signed-off-by: Kuniyuki Iwashima 
Link: https://lore.kernel.org/r/20220713175207.7727-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

netfilter: drop bridge nf reset from nf_reset

2019-10-01T16:42:15+00:00

commit 174e23810cd31
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: use indirect calls helpers at early demux stage

2019-05-05T17:38:04+00:00

So that we avoid another indirect call per RX packet, if
early demux is enabled.

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

net: use indirect calls helpers for L3 handler hooks

2019-05-05T17:38:04+00:00

So that we avoid another indirect call per RX packet in the common
case.

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

vrf: check accept_source_route on the original netdevice

2019-04-01T17:44:58+00:00

Configuration check to accept source route IP options should be made on
the incoming netdevice when the skb->dev is an l3mdev master. The route
lookup for the source route next hop also needs the incoming netdev.

v2->v3:
- Simplify by passing the original netdevice down the stack (per David
  Ahern).

Signed-off-by: Stephen Suryaputra 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-03-02T20:54:35+00:00

ipv4: Pass original device to ip_rcv_finish_core

2019-02-28T05:44:20+00:00

ip_route_input_rcu expects the original ingress device (e.g., for
proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv,
so dev needs to be saved prior to calling it. This was the behavior prior
to the listify changes.

Fixes: 5fa12739a53d0 ("net: ipv4: listify ip_rcv_finish")
Cc: Edward Cree 
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

net: ipv4: ip_input: fix blank line coding style issues

2019-01-27T21:27:50+00:00

Fix blank line coding style issues, make the code cleaner.
Remove a redundant blank line in ip_rcv_core().
Insert a blank line in ip_rcv() between different statement blocks.

Signed-off-by: Yang Wei 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: Fix usage of pskb_trim_rcsum

2019-01-18T22:05:14+00:00

In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.

Signed-off-by: Ross Lagerwall 
Signed-off-by: David S. Miller