linux-stable.git/net/ipv4/ip_gre.c, branch linux-5.4.y

ipv4: ip_gre: Fix drops of small packets in ipgre_xmit

2024-11-08T15:20:36+00:00

[ Upstream commit c4a14f6d9d17ad1e41a36182dd3b8a5fd91efbd7 ]

Regression Description:

Depending on the options specified for the GRE tunnel device, small
packets may be dropped. This occurs because the pskb_network_may_pull
function fails due to the packet's insufficient length.

For example, if only the okey option is specified for the tunnel device,
original (before encapsulation) packets smaller than 28 bytes (including
the IPv4 header) will be dropped. This happens because the required
length is calculated relative to the network header, not the skb->head.

Here is how the required length is computed and checked:

* The pull_len variable is set to 28 bytes, consisting of:
  * IPv4 header: 20 bytes
  * GRE header with Key field: 8 bytes

* The pskb_network_may_pull function adds the network offset, shifting
the checkable space further to the beginning of the network header and
extending it to the beginning of the packet. As a result, the end of
the checkable space occurs beyond the actual end of the packet.

Instead of ensuring that 28 bytes are present in skb->head, the function
is requesting these 28 bytes starting from the network header. For small
packets, this requested length exceeds the actual packet size, causing
the check to fail and the packets to be dropped.

This issue affects both locally originated and forwarded packets in
DMVPN-like setups.

How to reproduce (for local originated packets):

  ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \
          local  remote 0.0.0.0

  ip link set mtu 1400 dev gre1
  ip link set up dev gre1
  ip address add 192.168.13.1/24 dev gre1
  ip neighbor add 192.168.13.2 lladdr  dev gre1
  ping -s 1374 -c 10 192.168.13.2
  tcpdump -vni gre1
  tcpdump -vni  'ip proto 47'
  ip -s -s -d link show dev gre1

Solution:

Use the pskb_may_pull function instead the pskb_network_may_pull.

Fixes: 80d875cfc9d3 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()")
Signed-off-by: Anton Danilov 
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

ip_gre: do not report erspan version on GRE interface

2024-04-13T10:51:40+00:00

commit ee496694b9eea651ae1aa4c4667d886cdf74aa3b upstream.

Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.

IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.

Reported-by: Jianlin Shi 
Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu 
Acked-by: William Tu 
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Greg Kroah-Hartman

erspan: Check IFLA_GRE_ERSPAN_VER is set.

2024-04-13T10:51:40+00:00

commit 51fa960d3b5163b1af22efdebcabfccc5d615ad6 upstream.

Add a check to make sure the IFLA_GRE_ERSPAN_VER is provided by users.

Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.")
Cc: Eric Dumazet 
Signed-off-by: William Tu 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

erspan: make sure erspan_base_hdr is present in skb->head

2024-04-13T10:51:36+00:00

[ Upstream commit 17af420545a750f763025149fa7b833a4fc8b8f0 ]

syzbot reported a problem in ip6erspan_rcv() [1]

Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make
sure erspan_base_hdr is present in skb linear part (skb->head)
before getting @ver field from it.

Add the missing pskb_may_pull() calls.

v2: Reload iph pointer in erspan_rcv() after pskb_may_pull()
    because skb->head might have changed.

[1]

 BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline]
 BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline]
 BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline]
 BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610
  pskb_may_pull_reason include/linux/skbuff.h:2742 [inline]
  pskb_may_pull include/linux/skbuff.h:2756 [inline]
  ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline]
  gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610
  ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438
  ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
  ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586
  dst_input include/net/dst.h:460 [inline]
  ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310
  __netif_receive_skb_one_core net/core/dev.c:5538 [inline]
  __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652
  netif_receive_skb_internal net/core/dev.c:5738 [inline]
  netif_receive_skb+0x58/0x660 net/core/dev.c:5798
  tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549
  tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2108 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb63/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xe0 fs/read_write.c:652
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3804 [inline]
  slab_alloc_node mm/slub.c:3845 [inline]
  kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
  __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
  alloc_skb include/linux/skbuff.h:1318 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
  tun_alloc_skb drivers/net/tun.c:1525 [inline]
  tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2108 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb63/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xe0 fs/read_write.c:652
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0

Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Reported-by: syzbot+1c1cf138518bf0c53d68@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000772f2c0614b66ef7@google.com/
Signed-off-by: Eric Dumazet 
Cc: Lorenzo Bianconi 
Link: https://lore.kernel.org/r/20240328112248.1101491-1-edumazet@google.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

erspan: Add type I version 0 support.

2024-04-13T10:51:36+00:00

[ Upstream commit f989d546a2d5a9f001f6f8be49d98c10ab9b1897 ]

The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
  $ ip link add dev erspan11 type erspan \
            local 172.16.1.100 remote 172.16.1.200 \
            erspan_ver 0

Signed-off-by: William Tu 
Signed-off-by: David S. Miller 
Stable-dep-of: 17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
Signed-off-by: Sasha Levin

ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()

2023-12-13T17:18:12+00:00

[ Upstream commit 80d875cfc9d3711a029f234ef7d680db79e8fa4b ]

In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.

This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida 
Reviewed-by: Eric Dumazet 
Reviewed-by: Suman Ghosh 
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode

2023-05-30T11:44:05+00:00

[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info->key.tun_id),
			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski 
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye 
Acked-by: William Tu 
Signed-off-by: David S. Miller 
Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md")
Signed-off-by: Sasha Levin

erspan: do not use skb_mac_header() in ndo_start_xmit()

2023-04-05T09:16:38+00:00

[ Upstream commit 8e50ed774554f93d55426039b27b1e38d7fa64d8 ]

Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().

Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()

syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

Fixes: 1baf5ebf8954 ("erspan: auto detect truncated packets.")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

erspan: do not assume transport header is always set

2022-06-29T06:58:46+00:00

[ Upstream commit 301bd140ed0b24f0da660874c7e8a47dad8c8222 ]

Rewrite tests in ip6erspan_tunnel_xmit() and
erspan_fb_xmit() to not assume transport header is set.

syzbot reported:

WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline]
WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963
Modules linked in:
CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963
Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00
RSP: 0018:ffffc90005daf910 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003
RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40
R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000
FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0
Call Trace:

__netdev_start_xmit include/linux/netdevice.h:4805 [inline]
netdev_start_xmit include/linux/netdevice.h:4819 [inline]
xmit_one net/core/dev.c:3588 [inline]
dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604
sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342
__dev_xmit_skb net/core/dev.c:3815 [inline]
__dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219
dev_queue_xmit include/linux/netdevice.h:2994 [inline]
tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63
kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302


Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Cc: William Tu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ip_gre: test csum_start instead of transport header

2022-06-14T16:11:58+00:00

[ Upstream commit 8d21e9963bec1aad2280cdd034c8993033ef2948 ]

GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.

ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was

	if (csum && skb_checksum_start(skb) < skb->data)
		return -EINVAL;

This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward

	if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
	    skb_checksum_start(skb) < skb->data)
		return -EINVAL;

But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
  uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
  in skb_partial_csum_set in the normal header_ops datapath.

Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.

Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250f911 ("ip_gre: validate csum_start only on pull")
Reported-by: syzbot 
Signed-off-by: Willem de Bruijn 
Reviewed-by: Eric Dumazet 
Reviewed-by: Alexander Duyck 
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin