linux-stable.git/net/ipv4/ip_gre.c, branch linux-5.17.y Linux kernel stable tree ip_gre: test csum_start instead of transport header 2022-06-14T16:41:32+00:00 Willem de Bruijn willemb@google.com 2022-06-06T13:21:07+00:00 0c92d813c7c9ca2212ecd879232e7d87362fce98 [ Upstream commit 8d21e9963bec1aad2280cdd034c8993033ef2948 ] GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u Fixes: 8a0ed250f911 ("ip_gre: validate csum_start only on pull") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8d21e9963bec1aad2280cdd034c8993033ef2948 ]

GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.

ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was

	if (csum && skb_checksum_start(skb) < skb->data)
		return -EINVAL;

This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward

	if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
	    skb_checksum_start(skb) < skb->data)
		return -EINVAL;

But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
  uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
  in skb_partial_csum_set in the normal header_ops datapath.

Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.

Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250f911 ("ip_gre: validate csum_start only on pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode 2022-05-09T07:16:23+00:00 Peilin Ye peilin.ye@bytedance.com 2022-04-21T22:09:02+00:00 d2b0c2f47f1c572d9b611606de0e8ca1719ada3f [ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info->key.tun_id),
			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ip_gre: Make o_seqno start from 0 in native mode 2022-05-09T07:16:23+00:00 Peilin Ye peilin.ye@bytedance.com 2022-04-21T22:07:57+00:00 5ad8f5906a1580c095eebee4fcca244cf533f6f5 [ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ] For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]

For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode.  According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst() 2022-01-12T04:36:08+00:00 Guillaume Nault gnault@redhat.com 2022-01-10T13:43:09+00:00 f7716b318568b22fbf0e3be99279a979e217cf71 Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may have the last ECN bit set, which will interfere with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may
have the last ECN bit set, which will interfere with the route lookup
process as ip_route_output_key_hash() interpretes this bit specially
(to restrict the route scope).

Found by code inspection, compile tested only.

Fixes: 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip: use dev_addr_set() in tunnels 2021-10-13T16:41:37+00:00 Jakub Kicinski kuba@kernel.org 2021-10-12T16:06:34+00:00 5a1b7e1a532557e3af48c3ed7e61f3e757ee09ea Use dev_addr_set() instead of writing to netdev->dev_addr directly in ip tunnels drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Use dev_addr_set() instead of writing to netdev->dev_addr
directly in ip tunnels drivers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_gre: validate csum_start only on pull 2021-09-05T17:59:32+00:00 Willem de Bruijn willemb@google.com 2021-09-05T15:21:09+00:00 8a0ed250f911da31a2aef52101bc707846a800ff The GRE tunnel device can pull existing outer headers in ipge_xmit. This is a rare path, apparently unique to this device. The below commit ensured that pulling does not move skb->data beyond csum_start. But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and thus csum_start is irrelevant. Refine to exclude this. At the same time simplify and strengthen the test. Simplify, by moving the check next to the offending pull, making it more self documenting and removing an unnecessary branch from other code paths. Strengthen, by also ensuring that the transport header is correct and therefore the inner headers will be after skb_reset_inner_headers. The transport header is set to csum_start in skb_partial_csum_set. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Fixes: 1d011c4803c7 ("ip_gre: add validation for csum_start") Reported-by: Ido Schimmel <idosch@idosch.org> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The GRE tunnel device can pull existing outer headers in ipge_xmit.
This is a rare path, apparently unique to this device. The below
commit ensured that pulling does not move skb->data beyond csum_start.

But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and
thus csum_start is irrelevant.

Refine to exclude this. At the same time simplify and strengthen the
test.

Simplify, by moving the check next to the offending pull, making it
more self documenting and removing an unnecessary branch from other
code paths.

Strengthen, by also ensuring that the transport header is correct and
therefore the inner headers will be after skb_reset_inner_headers.
The transport header is set to csum_start in skb_partial_csum_set.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Fixes: 1d011c4803c7 ("ip_gre: add validation for csum_start")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-08-27T00:57:57+00:00 Jakub Kicinski kuba@kernel.org 2021-08-26T20:45:47+00:00 97c78d0af55fff206947a5f2b85b690b5acf28ce drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_gre: add validation for csum_start 2021-08-22T20:24:40+00:00 Shreyansh Chouhan chouhan.shreyansh630@gmail.com 2021-08-21T07:14:24+00:00 1d011c4803c72f3907eccfc1ec63caefb852fcbf Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv4 code. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Validate csum_start in gre_handle_offloads before we call _gre_xmit so
that we do not crash later when the csum_start value is used in the
lco_csum function call.

This patch deals with ipv4 code.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_tunnel: use ndo_siocdevprivate 2021-07-27T19:11:44+00:00 Arnd Bergmann arnd@arndb.de 2021-07-27T13:45:06+00:00 3e7a1c7c561ed8508fbdb98ed5708175bbcf7938 The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.

Move them over to the new .ndo_siocdevprivate operation.

Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
gre: let mac_header point to outer header only when necessary 2021-06-28T19:44:17+00:00 Guillaume Nault gnault@redhat.com 2021-06-25T13:33:13+00:00 aab1e898c26c3e4289c62b6d6482948672fab939 Commit e271c7b4420d ("gre: do not keep the GRE header around in collect medata mode") did reset the mac_header for the collect_md case. Let's extend this behaviour to classical gre devices as well. ipgre_header_parse() seems to be the only case that requires mac_header to point to the outer header. We can detect this case accurately by checking ->header_ops. For all other cases, we can reset mac_header. This allows to push an Ethernet header to ipgre packets and redirect them to an Ethernet device: $ tc filter add dev gre0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Before this patch, this worked only for collect_md gre devices. Now this works for regular gre devices as well. Only the special case of gre devices that use ipgre_header_ops isn't supported. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Commit e271c7b4420d ("gre: do not keep the GRE header around in collect
medata mode") did reset the mac_header for the collect_md case. Let's
extend this behaviour to classical gre devices as well.

ipgre_header_parse() seems to be the only case that requires mac_header
to point to the outer header. We can detect this case accurately by
checking ->header_ops. For all other cases, we can reset mac_header.

This allows to push an Ethernet header to ipgre packets and redirect
them to an Ethernet device:

  $ tc filter add dev gre0 ingress matchall          \
      action vlan push_eth dst_mac 00:00:5e:00:53:01 \
                           src_mac 00:00:5e:00:53:00 \
      action mirred egress redirect dev eth0

Before this patch, this worked only for collect_md gre devices.
Now this works for regular gre devices as well. Only the special case
of gre devices that use ipgre_header_ops isn't supported.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>