linux-stable.git/net/ipv4/igmp.c, branch v3.2.76

ipv4: igmp: Allow removing groups from a removed interface

2015-12-30T02:25:59+00:00

commit 4eba7bb1d72d9bde67d810d09bf62dc207b63c5c upstream.

When a multicast group is joined on a socket, a struct ip_mc_socklist
is appended to the sockets mc_list containing information about the
joined group.

If the interface is hot unplugged, this entry becomes stale. Prior to
commit 52ad353a5344f ("igmp: fix the problem when mc leave group") it
was possible to remove the stale entry by performing a
IP_DROP_MEMBERSHIP, passing either the old ifindex or ip address on
the interface. However, this fix enforces that the interface must
still exist. Thus with time, the number of stale entries grows, until
sysctl_igmp_max_memberships is reached and then it is not possible to
join and more groups.

The previous patch fixes an issue where a IP_DROP_MEMBERSHIP is
performed without specifying the interface, either by ifindex or ip
address. However here we do supply one of these. So loosen the
restriction on device existence to only apply when the interface has
not been specified. This then restores the ability to clean up the
stale entries.

Signed-off-by: Andrew Lunn 
Fixes: 52ad353a5344f "(igmp: fix the problem when mc leave group")
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs

2015-02-20T00:49:24+00:00

commit 4c672e4b42bc8046d63a6eb0a2c6a450a501af32 upstream.

It has been reported that generating an MLD listener report on
devices with large MTUs (e.g. 9000) and a high number of IPv6
addresses can trigger a skb_over_panic():

skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20
head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0
dev:port1
 ------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:100!
invalid opcode: 0000 [#1] SMP
Modules linked in: ixgbe(O)
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4
[...]
Call Trace:
 
 [] ? skb_put+0x3a/0x3b
 [] ? add_grhead+0x45/0x8e
 [] ? add_grec+0x394/0x3d4
 [] ? mld_ifc_timer_expire+0x195/0x20d
 [] ? mld_dad_timer_expire+0x45/0x45
 [] ? call_timer_fn.isra.29+0x12/0x68
 [] ? run_timer_softirq+0x163/0x182
 [] ? __do_softirq+0xe0/0x21d
 [] ? irq_exit+0x4e/0xd3
 [] ? smp_apic_timer_interrupt+0x3b/0x46
 [] ? apic_timer_interrupt+0x6a/0x70

mld_newpack() skb allocations are usually requested with dev->mtu
in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations")
we have changed the limit in order to be less likely to fail.

However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb)
macros, which determine if we may end up doing an skb_put() for
adding another record. To avoid possible fragmentation, we check
the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong
assumption as the actual max allocation size can be much smaller.

The IGMP case doesn't have this issue as commit 57e1ab6eaddc
("igmp: refine skb allocations") stores the allocation size in
the cb[].

Set a reserved_tailroom to make it fit into the MTU and use
skb_availroom() helper instead. This also allows to get rid of
igmp_skb_size().

Reported-by: Wei Liu 
Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Daniel Borkmann 
Cc: Eric Dumazet 
Cc: Hannes Frederic Sowa 
Cc: David L Stevens 
Acked-by: Eric Dumazet 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ipv4: Remove all uses of LL_ALLOCATED_SPACE

2015-02-20T00:49:23+00:00

commit 660882432909dbe611f1792eda158188065cb9f1 upstream.

ipv4: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

inetpeer: get rid of ip_id_count

2014-09-13T22:41:48+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

igmp: fix the problem when mc leave group

2014-08-06T17:07:38+00:00

[ Upstream commit 52ad353a5344f1f700c5b777175bdfa41d3cd65a ]

The problem was triggered by these steps:

1) create socket, bind and then setsockopt for add mc group.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("192.168.1.2");
   setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));

2) drop the mc group for this socket.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("0.0.0.0");
   setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));

3) and then drop the socket, I found the mc group was still used by the dev:

   netstat -g

   Interface       RefCnt Group
   --------------- ------ ---------------------
   eth2		   1	  255.0.0.37

Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need
to be released for the netdev when drop the socket, but this process was broken when
route default is NULL, the reason is that:

The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr
is NULL, the default route dev will be chosen, then the ifindex is got from the dev,
then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL,
the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be
released from the mc_list, but the dev didn't dec the refcnt for this mc group, so
when dropping the socket, the mc_list is NULL and the dev still keep this group.

v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs,
	so I add the checking for the in_dev before polling the mc_list, make sure when
	we remove the mc group, dec the refcnt to the real dev which was using the mc address.
	The problem would never happened again.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put

2013-10-26T20:06:09+00:00

[ Upstream commit e2401654dd0f5f3fb7a8d80dad9554d73d7ca394 ]

It is possible for the timer handlers to run after the call to
ip_mc_down so use in_dev_put instead of __in_dev_put in the handler
function in order to do proper cleanup when the refcnt reaches 0.
Otherwise, the refcnt can reach zero without the in_device being
destroyed and we end up leaking a reference to the net_device and
see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ip: generate unique IP identificator if local fragmentation is allowed

2013-10-26T20:06:08+00:00

[ Upstream commit 703133de331a7a7df47f31fb9de51dc6f68a9de8 ]

If local fragmentation is allowed, then ip_select_ident() and
ip_select_ident_more() need to generate unique IDs to ensure
correct defragmentation on the peer.

For example, if IPsec (tunnel mode) has to encrypt large skbs
that have local_df bit set, then all IP fragments that belonged
to different ESP datagrams would have used the same identificator.
If one of these IP fragments would get lost or reordered, then
peer could possibly stitch together wrong IP fragments that did
not belong to the same datagram. This would lead to a packet loss
or data corruption.

Signed-off-by: Ansis Atteka 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: reintroduce missing rcu_assign_pointer() calls

2012-02-03T17:22:20+00:00

[ Upstream commit cf778b00e96df6d64f8e21b8395d1f8a859ecdc7 ]

commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.

Signed-off-by: Eric Dumazet 
CC: Stephen Hemminger 
CC: Paul E. McKenney 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

igmp: Avoid zero delay when receiving odd mixture of IGMP queries

2012-01-12T19:29:44+00:00

commit a8c1f65c79cbbb2f7da782d4c9d15639a9b94b27 upstream.

Commit 5b7c84066733c5dfb0e4016d939757b38de189e4 ('ipv4: correct IGMP
behavior on v3 query during v2-compatibility mode') added yet another
case for query parsing, which can result in max_delay = 0.  Substitute
a value of 1, as in the usual v3 case.

Reported-by: Simon McVittie 
References: http://bugs.debian.org/654876
Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

ipv4 : igmp : fix error handle in ip_mc_add_src()

2011-11-23T22:31:39+00:00

When add sources to interface failure, need to roll back the sfcount[MODE]
to before state. We need to match it corresponding.

Acked-by: David L Stevens 
Acked-by: Eric Dumazet 
Signed-off-by: Jun Zhao 
Signed-off-by: David S. Miller