linux-stable.git/net/ipv4/igmp.c, branch linux-3.15.y

inetpeer: get rid of ip_id_count

2014-08-14T01:51:48+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

igmp: fix the problem when mc leave group

2014-07-28T15:08:24+00:00

[ Upstream commit 52ad353a5344f1f700c5b777175bdfa41d3cd65a ]

The problem was triggered by these steps:

1) create socket, bind and then setsockopt for add mc group.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("192.168.1.2");
   setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));

2) drop the mc group for this socket.
   mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37");
   mreq.imr_interface.s_addr = inet_addr("0.0.0.0");
   setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));

3) and then drop the socket, I found the mc group was still used by the dev:

   netstat -g

   Interface       RefCnt Group
   --------------- ------ ---------------------
   eth2		   1	  255.0.0.37

Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need
to be released for the netdev when drop the socket, but this process was broken when
route default is NULL, the reason is that:

The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr
is NULL, the default route dev will be chosen, then the ifindex is got from the dev,
then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL,
the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be
released from the mc_list, but the dev didn't dec the refcnt for this mc group, so
when dropping the socket, the mc_list is NULL and the dev still keep this group.

v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs,
	so I add the checking for the in_dev before polling the mc_list, make sure when
	we remove the mc group, dec the refcnt to the real dev which was using the mc address.
	The problem would never happened again.

Signed-off-by: Ding Tianhong 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: replace macros net_random and net_srandom with direct calls to prandom

2014-01-14T23:15:25+00:00

This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.

Signed-off-by: Aruna-Hewapathirane 
Suggested-by: Hannes Frederic Sowa 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ipv4: register igmp_notifier even when !CONFIG_PROC_FS

2014-01-14T23:03:33+00:00

We still need this notifier even when we don't config
PROC_FS.

It should be rare to have a kernel without PROC_FS,
so just for completeness.

Cc: Stephen Hemminger 
Cc: David S. Miller 
Cc: Patrick McHardy 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

ipv4: fix all space errors in file igmp.c

2013-12-26T18:43:21+00:00

Signed-off-by: Weilong Chen 
Signed-off-by: David S. Miller

ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put

2013-10-01T05:28:56+00:00

It is possible for the timer handlers to run after the call to
ip_mc_down so use in_dev_put instead of __in_dev_put in the handler
function in order to do proper cleanup when the refcnt reaches 0.
Otherwise, the refcnt can reach zero without the in_device being
destroyed and we end up leaking a reference to the net_device and
see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine 
Signed-off-by: David S. Miller

ip: generate unique IP identificator if local fragmentation is allowed

2013-09-19T18:11:15+00:00

If local fragmentation is allowed, then ip_select_ident() and
ip_select_ident_more() need to generate unique IDs to ensure
correct defragmentation on the peer.

For example, if IPsec (tunnel mode) has to encrypt large skbs
that have local_df bit set, then all IP fragments that belonged
to different ESP datagrams would have used the same identificator.
If one of these IP fragments would get lost or reordered, then
peer could possibly stitch together wrong IP fragments that did
not belong to the same datagram. This would lead to a packet loss
or data corruption.

Signed-off-by: Ansis Atteka 
Signed-off-by: David S. Miller

net: igmp: Allow user-space configuration of igmp unsolicited report interval

2013-08-09T18:27:46+00:00

Adds the new procfs knobs:

    /proc/sys/net/ipv4/conf/*/igmpv2_unsolicited_report_interval
    /proc/sys/net/ipv4/conf/*/igmpv3_unsolicited_report_interval

Which will allow userspace configuration of the IGMP unsolicited report
interval (see below) in milliseconds.  The defaults are 10000ms for IGMPv2
and 1000ms for IGMPv3 in accordance with RFC2236 and RFC3376.

Background:

If an IGMP join packet is lost you will not receive data sent to the
multicast group so if no data arrives from that multicast group in a
period of time after the IGMP join a second IGMP join will be sent.  The
delay between joins is the "IGMP Unsolicited Report Interval".

Prior to this patch this value was hard coded in the kernel to 10s for
IGMPv2 and 1s for IGMPv3.  10s is unsuitable for some use-cases, such as
IPTV as it can cause channel change to be slow in the presence of packet
loss.

This patch allows the value to be overridden from userspace for both
IGMPv2 and IGMPv3 such that it can be tuned accoding to the network.

Tested with Wireshark and a simple program to join a (non-existent)
multicast group.  The distribution of timings for the second join differ
based upon setting the procfs knobs.

igmpvX_unsolicited_report_interval is intended to follow the pattern
established by force_igmp_version, and while a procfs entry has been added
a corresponding sysctl knob has not as it is my understanding that sysctl
is deprecated[1].

[1]: http://lwn.net/Articles/247243/

Signed-off-by: William Manley 
Acked-by: Hannes Frederic Sowa 
Acked-by: Benjamin LaHaise 
Signed-off-by: David S. Miller

net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3

2013-08-09T18:27:46+00:00

If an IGMP join packet is lost you will not receive data sent to the
multicast group so if no data arrives from that multicast group in a
period of time after the IGMP join a second IGMP join will be sent.  The
delay between joins is the "IGMP Unsolicited Report Interval".

Previously this value was hard coded to be chosen randomly between 0-10s.
This can be too long for some use-cases, such as IPTV as it can cause
channel change to be slow in the presence of packet loss.

The value 10s has come from IGMPv2 RFC2236, which was reduced to 1s in
IGMPv3 RFC3376.  This patch makes the kernel use the 1s value from the
later RFC if we are operating in IGMPv3 mode.  IGMPv2 behaviour is
unaffected.

Tested with Wireshark and a simple program to join a (non-existent)
multicast group.  The distribution of timings for the second join differ
based upon setting /proc/sys/net/ipv4/conf/eth0/force_igmp_version.

Signed-off-by: William Manley 
Acked-by: Hannes Frederic Sowa 
Acked-by: Benjamin LaHaise 
Signed-off-by: David S. Miller

ipv4, ipv6: send igmpv3/mld packets with TC_PRIO_CONTROL

2013-07-28T18:13:55+00:00

v2:
a) Also send ipv4 igmp messages with TC_PRIO_CONTROL

Cc: William Manley 
Cc: Lukas Tribus 
Acked-by: Benjamin LaHaise 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller