[ Upstream commit b62869a81a7ce388d1fbb0fac5fa8300ea614d81 ]

ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes,
but ethnl_rss_set() and ethnl_rss_create_doit() parse them with
ethnl_update_u8(), which reads a single byte.

On little endian this happens to read the least significant byte and
works as long as the value fits in a byte. On big endian it reads the
most significant byte, so the requested value is parsed incorrectly.

The destination fields in struct ethtool_rxfh_param are u8, so the
attribute can't be read directly with ethnl_update_u32().
Cap the hfunc policy at U8_MAX so an out of range value is rejected
instead of being silently truncated into the u8 field, and add
ethnl_update_u8_u32() to read the full u32 and narrow it into the u8
destination.

Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink")
Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink")
Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

When a single Netlink socket issues MODULE_FW_FLASH_ACT against multiple
devices, ethnl_sock_priv_set() overwrites sk_priv->dev on each call,
retaining only the last one. The socket priv is used on socket close,
to walk the global work list and mark the uncompleted flashing work
as "orphaned". Otherwise if another socket reuses the PID it will
unexpectedly receive the flashing notifications.

Don't record the device, record net pointer instead. The purpose of
the dev is to scope the work to a netns, anyway. If we store netns
the overrides are safe/a nop since all flashed devices must be in
the same netns as the socket.

Fixes: 32b4c8b53ee7 ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .parse_request() ethnl operation extracts the relevant attributes
from the netlink request to populate the private req_info.

By passing genl_info as a parameter to this callback, we can use
the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory
parameters.

This macro has the advantage of returning a better error explanation
through the netlink_ext_ack struct.

Convert the eeprom ethnl code to this macro, as it's the only command
yet that has mandatory request parameters.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce the userspace entry point for PHY MSE diagnostics via
ethtool netlink. This exposes the core API added previously and
returns both capability information and one or more snapshots.

Userspace sends ETHTOOL_MSG_MSE_GET. The reply carries:
- ETHTOOL_A_MSE_CAPABILITIES: scale limits and timing information
- ETHTOOL_A_MSE_CHANNEL_* nests: one or more snapshots (per-channel
  if available, otherwise WORST, otherwise LINK)

Link down returns -ENETDOWN.

Changes:
  - YAML: add attribute sets (mse, mse-capabilities, mse-snapshot)
    and the mse-get operation
  - UAPI (generated): add ETHTOOL_A_MSE_* enums and message IDs,
    ETHTOOL_MSG_MSE_GET/REPLY
  - ethtool core: add net/ethtool/mse.c implementing the request,
    register genl op, and hook into ethnl dispatch
  - docs: document MSE_GET in ethtool-netlink.rst

The include/uapi/linux/ethtool_netlink_generated.h is generated
from Documentation/netlink/specs/ethtool.yaml.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027122801.982364-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Implement removing additional RSS contexts via Netlink.
Technically it'd be possible to shoehorn the delete operation
into ethnl_request_ops-compatible handler. The code ends
up longer than open coded version, and I think we'll need
a custom way of sending notifications at some stage (if we
allow tying the context lifetime to the netlink socket, in
the future).

Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Support creating contexts via Netlink. Setting flow hashing
fields on the new context is not supported at this stage,
it can be added later.

An empty indirection table is not supported. This is a carry
over from the IOCTL interface where empty indirection table
meant delete. We can repurpose empty indirection table in
Netlink but for now to avoid confusion reject it using the
policy.

Support letting user choose the ID for the new context. This was
not possible in IOCTL since the context ID field for the create
action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value.

Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET.

The tricky part is dealing with symmetric hashing. In netlink user
can change the hashing fields and symmetric hash in one request,
in IOCTL the two used to be set via different uAPI requests.
Since fields and hash function config are still separate driver
callbacks - changes to the two are not atomic. Keep things simple
and validate the settings against both pre- and post- change ones.
Meaning that we will reject the config request if user tries
to correct the flow fields and set input_xfrm in one request,
or disables input_xfrm and makes flow fields non-symmetric.

We can adjust it later if there's a real need. Starting simple feels
right, and potentially partially applying the settings isn't nice,
either.

Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add initial support for RSS_SET, for now only operations on
the indirection table are supported.

Unlike the ioctl don't check if at least one parameter is
being changed. This is how other ethtool-nl ops behave,
so pick the ethtool-nl consistency vs copying ioctl behavior.

There are two special cases here:
 1) resetting the table to defaults;
 2) support for tables of different size.

For (1) I use an empty Netlink attribute (array of size 0).

(2) may require some background. AFAICT a lot of modern devices
allow allocating RSS tables of different sizes. mlx5 can upsize
its tables, bnxt has some "table size calculation", and Intel
folks asked about RSS table sizing in context of resource allocation
in the past. The ethtool IOCTL API has a concept of table size,
but right now the user is expected to provide a table exactly
the size the device requests. Some drivers may change the table
size at runtime (in response to queue count changes) but the
user is not in control of this. What's not great is that all
RSS contexts share the same table size. For example a device
with 128 queues enabled, 16 RSS contexts 8 queues in each will
likely have 256 entry tables for each of the 16 contexts,
while 32 would be more than enough given each context only has
8 queues. To address this the Netlink API should avoid enforcing
table size at the uAPI level, and should allow the user to express
the min table size they expect.

To fully solve (2) we will need more driver plumbing but
at the uAPI level this patch allows the user to specify
a table size smaller than what the device advertises. The device
table size must be a multiple of the user requested table size.
We then replicate the user-provided table to fill the full device
size table. This addresses the "allow the user to express the min
table size" objective, while not enforcing any fixed size.
From Netlink perspective .get_rxfh_indir_size() is now de facto
the "max" table size supported by the device.

We may choose to support table replication in ethtool, too,
when we actually plumb this thru the device APIs.

Initially I was considering moving full pattern generation
to the kernel (which queues to use, at which frequency and
what min sequence length). I don't think this complexity
would buy us much and most if not all devices have pow-2
table sizes, which simplifies the replication a lot.

Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We now reuse .parse_request() from GET on SET, so we need to make sure
that the policies for both cover the attributes used for .parse_request().
genetlink will only allocate space in info->attrs for ARRAY_SIZE(policy).

Reported-by: syzbot+430f9f76633641a62217@syzkaller.appspotmail.com
Fixes: 963781bdfe20 ("net: ethtool: call .parse_request for SET handlers")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250626233926.199801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Copy information parsed for SET with .req_parse to NTF handling
and therefore the GET-equivalent that it ends up executing.
This way if the SET was on a sub-object (like RSS context)
the notification will also be appropriately scoped.

Also copy the phy_index, Maxime suggests this will help PLCA
commands generate accurate notifications as well.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>