linux-stable.git/net/ethtool/common.c, branch v6.8

net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops

2023-12-14T06:07:16+00:00

The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.

This is part 1/2 of the fix, as suggested in [1]:

- First simplify the code by always providing a pointer to all params
   (indir, key and func); the fact that some of them may be NULL seems
   like a weird historic thing or a premature optimization.
   It will simplify the drivers if all pointers are always present.

 - Then make the functions take a dev pointer, and a pointer to a
   single struct wrapping all arguments. The set_* should also take
   an extack.

Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski 
Suggested-by: Jacob Keller 
Signed-off-by: Ahmed Zaki 
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski

net: partial revert of the "Make timestamping selectable: series

2023-11-19T02:42:37+00:00

Revert following commits:

commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command")

They need more time for reviews.

Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski

net: Change the API of PHY default timestamp to MAC

2023-11-18T14:52:57+00:00

Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility I
introduce a default_timestamp flag in phy_device that is set by the phy
driver to know we are using the old API behavior.

The phy_set_timestamp function is called at each call of phy_attach_direct.
In case of MAC driver using phylink this function is called when the
interface is turned up. Then if the interface goes down and up again the
last choice of timestamp will be overwritten by the default choice.
A solution could be to cache the timestamp status but it can bring other
issues. In case of SFP, if we change the module, it doesn't make sense to
blindly re-set the timestamp back to PHY, if the new module has a PHY with
mediocre timestamping capabilities.

Signed-off-by: Kory Maincent 
Signed-off-by: David S. Miller

net: ethtool: Refactor identical get_ts_info implementations.

2023-11-18T14:52:57+00:00

The vlan, macvlan and the bonding drivers call their "real" device driver
in order to report the time stamping capabilities.  Provide a core
ethtool helper function to avoid copy/paste in the stack.

Signed-off-by: Richard Cochran 
Signed-off-by: Kory Maincent 
Reviewed-by: Florian Fainelli 
Reviewed-by: Jay Vosburgh 
Signed-off-by: David S. Miller

ethtool: untangle the linkmode and ethtool headers

2023-10-20T11:47:33+00:00

Commit 26c5334d344d ("ethtool: Add forced speed to supported link
modes maps") added a dependency between ethtool.h and linkmode.h.
The dependency in the opposite direction already exists so the
new code was inserted in an awkward place.

The reason for ethtool.h to include linkmode.h, is that
ethtool_forced_speed_maps_init() is a static inline helper.
That's not really necessary.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Paul Greenwalt 
Reviewed-by: Russell King (Oracle) 
Reviewed-by: Vladimir Oltean 
Signed-off-by: David S. Miller

net: transfer rtnl_lock() requirement from ethtool_set_ethtool_phy_ops() to caller

2023-08-03T02:11:06+00:00

phy_init() and phy_exit() will have to do more stuff under rtnl_lock()
in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot
of stuff under the hood, it's a pity to lock and unlock the rtnetlink
mutex twice in a row.

Change the calling convention such that the only caller of
ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where
the rtnl_mutex is already acquired.

Signed-off-by: Vladimir Oltean 
Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski

drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY

2023-01-11T08:35:02+00:00

This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S
Ethernet PHY. According to the specifications, the 10BASE-T1S supports
Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or
Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations.

Signed-off-by: Piergiorgio Beruto 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net_tstamp: add SOF_TIMESTAMPING_OPT_ID_TCP

2022-12-09T03:49:21+00:00

Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from
write_seq sockets instead of snd_una.

This should have been the behavior from the start. Because processes
may now exist that rely on the established behavior, do not change
behavior of the existing option, but add the right behavior with a new
flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on
stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID.

Intuitively the contract is that the counter is zero after the
setsockopt, so that the next write N results in a notification for
the last byte N - 1.

On idle sockets snd_una == write_seq and this holds for both. But on
sockets with data in transmission, snd_una records the unacked offset
in the stream. This depends on the ACK response from the peer. A
process cannot learn this in a race free manner (ioctl SIOCOUTQ is one
racy approach).

write_seq records the offset at the last byte written by the process.
This is a better starting point. It matches the intuitive contract in
all circumstances, unaffected by external behavior.

The new timestamp flag necessitates increasing sk_tsflags to 32 bits.
Move the field in struct sock to avoid growing the socket (for some
common CONFIG variants). The UAPI interface so_timestamping.flags is
already int, so 32 bits wide.

Reported-by: Sotirios Delimanolis 
Signed-off-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski

ethtool: Fail number of channels change when it conflicts with rxnfc

2022-11-08T11:08:44+00:00

Similar to what we do with the hash indirection table [1], when network
flow classification rules are forwarding traffic to channels greater
than the requested number of channels, fail the operation.
Without this, traffic could be directed to channels which no longer
exist (dropped) after changing number of channels.

[1] commit d4ab4286276f ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}")

Reviewed-by: Tariq Toukan 
Signed-off-by: Gal Pressman 
Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com
Signed-off-by: Paolo Abeni

ethtool: Add support for 800Gbps link modes

2022-10-24T09:43:39+00:00

Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.

Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2

[1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf
[2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf

Signed-off-by: Amit Cohen 
Reviewed-by: Ido Schimmel 
Signed-off-by: Petr Machata 
Signed-off-by: David S. Miller