linux-stable.git/net/dsa, branch v6.1.76 Linux kernel stable tree net: dsa: sja1105: always enable the send_meta options 2023-07-19T14:22:06+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-07-03T22:05:45+00:00 947d741adf6622581e8a8e7bc24e6abb94cc46a3 [ Upstream commit a372d66af48506d9f7aaae2a474cd18f14d98cb8 ] incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless PTP RX timestamping is enabled. The incl_srcpt option was initially unconditionally enabled, then that changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that it now needs to be always enabled, otherwise the driver does not have a reliable source of information regarding source_port and switch_id for link-local traffic (tag_8021q VLANs may be imprecise since now they identify an entire bridging domain when ports are not standalone). If we accept that PTP RX timestamping (and therefore, meta frame generation) is always enabled in hardware, then that limitation could be avoided and packets with any MAC DA can be properly received, because meta frames do contain the original bytes from the MAC DA of their associated link-local packet. This change enables meta frame generation unconditionally, which also has the nice side effects of simplifying the switch control path (a switch reset is no longer required on hwtstamping settings change) and the tagger data path (it no longer needs to be informed whether to expect meta frames or not - it always does). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a372d66af48506d9f7aaae2a474cd18f14d98cb8 ]

incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.

The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).

If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.

This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).

Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: tag_sja1105: fix MAC DA patching from meta frames 2023-07-19T14:22:06+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-07-03T22:05:44+00:00 079dc659e31f13f5685e2d0ca966576317d196ad [ Upstream commit 1dcf6efd5f0c1f4496b3ef7ec5a7db104a53b38c ] The SJA1105 manual says that at offset 4 into the meta frame payload we have "MAC destination byte 2" and at offset 5 we have "MAC destination byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2] aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3]. The sja1105_meta_unpack() function decodes these the other way around, so a frame with MAC DA 01:80:c2:11:22:33 is received by the network stack as having 01:80:c2:22:11:33. Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1dcf6efd5f0c1f4496b3ef7ec5a7db104a53b38c ]

The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].

The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.

Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: tag_sja1105: fix source port decoding in vlan_filtering=0 bridge mode 2023-07-19T14:22:04+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-06-30T22:20:10+00:00 6469dc1c138897d55180d05c15328daa2d4606be [ Upstream commit a398b9ea0c3b791b7a0f4c6029a62cf628f97f22 ] There was a regression introduced by the blamed commit, where pinging to a VLAN-unaware bridge would fail with the repeated message "Couldn't decode source port" coming from the tagging protocol driver. When receiving packets with a bridge_vid as determined by dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode: - source_port = 0 (which isn't really valid, more like "don't know") - switch_id = 0 (which isn't really valid, more like "don't know") - vbid = value in range 1-7 Since the blamed patch has reversed the order of the checks, we are now going to believe that source_port != -1 and switch_id != -1, so they're valid, but they aren't. The minimal solution to the problem is to only populate source_port and switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero, i.e. the source port information is trustworthy. Fixes: c1ae02d87689 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a398b9ea0c3b791b7a0f4c6029a62cf628f97f22 ]

There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.

When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7

Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.

The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.

Fixes: c1ae02d87689 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT 2023-07-19T14:22:01+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-06-27T09:42:07+00:00 f7210424471442e50883f2793ee2a527fb72fe04 [ Upstream commit c1ae02d876898b1b8ca1e12c6f84d7b406263800 ] Currently the sja1105 tagging protocol prefers using the source port information from the VLAN header if that is available, falling back to the INCL_SRCPT option if it isn't. The VLAN header is available for all frames except for META frames initiated by the switch (containing RX timestamps), and thus, the "if (is_link_local)" branch is practically dead. The tag_8021q source port identification has become more loose ("imprecise") and will report a plausible rather than exact bridge port, when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local traffic always needs to know the precise source port. With incorrect source port reporting, for example PTP traffic over 2 bridged ports will all be seen on sockets opened on the first such port, which is incorrect. Now that the tagging protocol has been changed to make link-local frames always contain source port information, we can reverse the order of the checks so that we always give precedence to that information (which is always precise) in lieu of the tag_8021q VID which is only precise for a standalone port. Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID") Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c1ae02d876898b1b8ca1e12c6f84d7b406263800 ]

Currently the sja1105 tagging protocol prefers using the source port
information from the VLAN header if that is available, falling back to
the INCL_SRCPT option if it isn't. The VLAN header is available for all
frames except for META frames initiated by the switch (containing RX
timestamps), and thus, the "if (is_link_local)" branch is practically
dead.

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port. With incorrect
source port reporting, for example PTP traffic over 2 bridged ports will
all be seen on sockets opened on the first such port, which is incorrect.

Now that the tagging protocol has been changed to make link-local frames
always contain source port information, we can reverse the order of the
checks so that we always give precedence to that information (which is
always precise) in lieu of the tag_8021q VID which is only precise for a
standalone port.

Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: tag_brcm: legacy: fix daisy-chained switches 2023-03-30T10:49:09+00:00 Álvaro Fernández Rojas noltari@gmail.com 2023-03-19T09:55:40+00:00 774865342132d434505d3f55d906b48f30c83d3e [ Upstream commit 032a954061afd4b7426c3eb6bfd2952ef1e9a384 ] When BCM63xx internal switches are connected to switches with a 4-byte Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one based on its PVID (which is likely 0). Right now, the packet is received by the BCM63xx internal switch and the 6-byte tag is properly processed. The next step would to decode the corresponding 4-byte tag. However, the internal switch adds an invalid VLAN tag after the 6-byte tag and the 4-byte tag handling fails. In order to fix this we need to remove the invalid VLAN tag after the 6-byte tag before passing it to the 4-byte tag decoding. Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 032a954061afd4b7426c3eb6bfd2952ef1e9a384 ]

When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.

Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max_mtu() 2023-03-22T12:33:49+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-03-14T18:24:04+00:00 b5d6e4f6b97cb3b892e1468192898fb38ca2bc2c [ Upstream commit 636e8adf7878eab3614250234341bde45537f47a ] Currently, when dsa_slave_change_mtu() is called on a user port where dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code will stumble upon this check: if (new_master_mtu > mtu_limit) return -ERANGE; because new_master_mtu is adjusted for the tagger overhead but mtu_limit is not. But it would be good if the logic went through, for example if the DSA master really depends on an MTU adjustment to accept DSA-tagged frames. To make the code pass through the check, we need to adjust mtu_limit for the overhead as well, if the minimum restriction was caused by the DSA user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU are always offset by the protocol overhead. Currently no drivers return 1500 .port_max_mtu(), but this is only temporary and a bug in itself - mv88e6xxx should have done that, but since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") it no longer does. This is a preparation for fixing that. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 636e8adf7878eab3614250234341bde45537f47a ]

Currently, when dsa_slave_change_mtu() is called on a user port where
dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code
will stumble upon this check:

	if (new_master_mtu > mtu_limit)
		return -ERANGE;

because new_master_mtu is adjusted for the tagger overhead but mtu_limit
is not.

But it would be good if the logic went through, for example if the DSA
master really depends on an MTU adjustment to accept DSA-tagged frames.

To make the code pass through the check, we need to adjust mtu_limit for
the overhead as well, if the minimum restriction was caused by the DSA
user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU
are always offset by the protocol overhead.

Currently no drivers return 1500 .port_max_mtu(), but this is only
temporary and a bug in itself - mv88e6xxx should have done that, but
since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
setting MTU for DSA and CPU ports") it no longer does. This is a
preparation for fixing that.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path 2022-12-31T12:32:29+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2022-12-09T23:52:42+00:00 14ed46a13aba42a6ddd85de6f6274090df3586a5 [ Upstream commit e095493091e850d5292ad01d8fbf5cde1d89ac53 ] If dsa_tag_8021q_setup() fails, for example due to the inability of the device to install a VLAN, the tag_8021q context of the switch will leak. Make sure it is freed on the error path. Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e095493091e850d5292ad01d8fbf5cde1d89ac53 ]

If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.

Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: sja1105: Check return value 2022-12-03T04:46:52+00:00 Artem Chernyshev artem.chernyshev@red-soft.ru 2022-12-01T14:00:32+00:00 8948876335b1752176afdff8e704099a3ea0f6e6 Return NULL if we got unexpected value from skb_trim_rcsum() in sja1110_rcv_inband_control_extension() Fixes: 4913b8ebf8a9 ("net: dsa: add support for the SJA1110 native tagging protocol") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221201140032.26746-3-artem.chernyshev@red-soft.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Return NULL if we got unexpected value from skb_trim_rcsum() in
sja1110_rcv_inband_control_extension()

Fixes: 4913b8ebf8a9 ("net: dsa: add support for the SJA1110 native tagging protocol")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-3-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: dsa: hellcreek: Check return value 2022-12-03T04:46:52+00:00 Artem Chernyshev artem.chernyshev@red-soft.ru 2022-12-01T14:00:31+00:00 d4edb50688652eb10be270bc515da63815de428f Return NULL if we got unexpected value from skb_trim_rcsum() in hellcreek_rcv() Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20221201140032.26746-2-artem.chernyshev@red-soft.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Return NULL if we got unexpected value from skb_trim_rcsum()
in hellcreek_rcv()

Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221201140032.26746-2-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: dsa: ksz: Check return value 2022-12-03T04:46:51+00:00 Artem Chernyshev artem.chernyshev@red-soft.ru 2022-12-01T14:00:30+00:00 3d8fdcbf1f42e2bb9ae8b8c0b6f202278c788a22 Return NULL if we got unexpected value from skb_trim_rcsum() in ksz_common_rcv() Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bafe9ba7d908 ("net: dsa: ksz: Factor out common tag code") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Return NULL if we got unexpected value from skb_trim_rcsum()
in ksz_common_rcv()

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: bafe9ba7d908 ("net: dsa: ksz: Factor out common tag code")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>