linux-stable.git/net/dsa, branch v4.19.26

net: dsa: slave: Don't propagate flag changes on down slave interfaces

2019-02-12T18:47:22+00:00

[ Upstream commit 17ab4f61b8cd6f9c38e9d0b935d86d73b5d0d2b5 ]

The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.

When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.

Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.

Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Rundong Ge 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Fix NULL checking in dsa_slave_set_eee()

2019-02-12T18:47:21+00:00

[ Upstream commit 00670cb8a73b10b10d3c40f045c15411715e4465 ]

This function can't succeed if dp->pl is NULL.  It will Oops inside the
call to return phylink_ethtool_get_eee(dp->pl, e);

Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink")
Signed-off-by: Dan Carpenter 
Reviewed-by: Florian Fainelli 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Fix lockdep false positive splat

2019-02-12T18:47:21+00:00

[ Upstream commit c8101f7729daee251f4f6505f9d135ec08e1342f ]

Creating a macvtap on a DSA-backed interface results in the following
splat when lockdep is enabled:

[   19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[   23.041198] device lan0 entered promiscuous mode
[   23.043445] device eth0 entered promiscuous mode
[   23.049255]
[   23.049557] ============================================
[   23.055021] WARNING: possible recursive locking detected
[   23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted
[   23.066132] --------------------------------------------
[   23.071598] ip/2861 is trying to acquire lock:
[   23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38
[   23.083693]
[   23.083693] but task is already holding lock:
[   23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.096774]
[   23.096774] other info that might help us debug this:
[   23.103494]  Possible unsafe locking scenario:
[   23.103494]
[   23.109584]        CPU0
[   23.112093]        ----
[   23.114601]   lock(_xmit_ETHER);
[   23.117917]   lock(_xmit_ETHER);
[   23.121233]
[   23.121233]  *** DEADLOCK ***
[   23.121233]
[   23.127325]  May be due to missing lock nesting notation
[   23.127325]
[   23.134315] 2 locks held by ip/2861:
[   23.137987]  #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0
[   23.146231]  #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.153757]
[   23.153757] stack backtrace:
[   23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118
[   23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[   23.172843] Call trace:
[   23.175358]  dump_backtrace+0x0/0x188
[   23.179116]  show_stack+0x14/0x20
[   23.182524]  dump_stack+0xb4/0xec
[   23.185928]  __lock_acquire+0x123c/0x1860
[   23.190048]  lock_acquire+0xc8/0x248
[   23.193724]  _raw_spin_lock_bh+0x40/0x58
[   23.197755]  dev_set_rx_mode+0x1c/0x38
[   23.201607]  dev_set_promiscuity+0x3c/0x50
[   23.205820]  dsa_slave_change_rx_flags+0x5c/0x70
[   23.210567]  __dev_set_promiscuity+0x148/0x1e0
[   23.215136]  __dev_set_rx_mode+0x74/0x98
[   23.219167]  dev_uc_add+0x54/0x70
[   23.222575]  macvlan_open+0x170/0x1d0
[   23.226336]  __dev_open+0xe0/0x160
[   23.229830]  __dev_change_flags+0x16c/0x1b8
[   23.234132]  dev_change_flags+0x20/0x60
[   23.238074]  do_setlink+0x2d0/0xc50
[   23.241658]  __rtnl_newlink+0x5f8/0x6e8
[   23.245601]  rtnl_newlink+0x50/0x78
[   23.249184]  rtnetlink_rcv_msg+0x360/0x4e0
[   23.253397]  netlink_rcv_skb+0xe8/0x130
[   23.257338]  rtnetlink_rcv+0x14/0x20
[   23.261012]  netlink_unicast+0x190/0x210
[   23.265043]  netlink_sendmsg+0x288/0x350
[   23.269075]  sock_sendmsg+0x18/0x30
[   23.272659]  ___sys_sendmsg+0x29c/0x2c8
[   23.276602]  __sys_sendmsg+0x60/0xb8
[   23.280276]  __arm64_sys_sendmsg+0x1c/0x28
[   23.284488]  el0_svc_common+0xd8/0x138
[   23.288340]  el0_svc_handler+0x24/0x80
[   23.292192]  el0_svc+0x8/0xc

This looks fairly harmless (no actual deadlock occurs), and is
fixed in a similar way to c6894dec8ea9 ("bridge: fix lockdep
addr_list_lock false positive splat") by putting the addr_list_lock
in its own lockdep class.

Signed-off-by: Marc Zyngier 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Drop GPIO includes

2018-08-27T22:24:33+00:00

Commit 52638f71fcff ("dsa: Move gpio reset into switch driver")
moved the GPIO handling into the switch drivers but forgot
to remove the GPIO header includes.

Signed-off-by: Linus Walleij 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net_sched: remove list_head from tc_action

2018-08-21T19:45:44+00:00

After commit 90b73b77d08e, list_head is no longer needed.
Now we just need to convert the list iteration to array
iteration for drivers.

Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions")
Cc: Jiri Pirko 
Cc: Vlad Buslov 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net

2018-08-09T18:52:36+00:00

Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst
adding some tracepoints.

Signed-off-by: David S. Miller

dsa: slave: eee: Allow ports to use phylink

2018-08-09T02:19:03+00:00

For a port to be able to use EEE, both the MAC and the PHY must
support EEE. A phy can be provided by both a phydev or phylink. Verify
at least one of these exist, not just phydev.

Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net

2018-08-02T17:55:32+00:00

The BTF conflicts were simple overlapping changes.

The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.

Signed-off-by: David S. Miller

net: dsa: Do not suspend/resume closed slave_dev

2018-08-01T16:53:45+00:00

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: dsa: Remove VLA usage

2018-07-18T22:08:31+00:00

We avoid 2 VLAs by using a pre-allocated field in dsa_switch. We also
try to avoid dynamic allocation whenever possible (when using fewer than
bits-per-long ports, which is the common case).

Link: http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Link: http://lkml.kernel.org/r/20180505185145.GB32630@lunn.ch
Signed-off-by: Salvatore Mesoraca 
[kees: tweak commit subject and message slightly]
Signed-off-by: Kees Cook 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller