linux-stable.git/net/dsa, branch linux-4.9.y

net: dsa: tag_brcm: Fix skb->fwd_offload_mark location

2020-04-13T08:32:53+00:00

When the backport of upstream commit
0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ("net: dsa: Fix duplicate
frames flooded by learning") was done the assignment of
skb->fwd_offload_mark would land in brcm_tag_xmit() which is incorrect,
it should have been in brcm_tag_rcv().

Fixes: 5e845dc62f38 ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Fix duplicate frames flooded by learning

2020-04-02T15:20:29+00:00

[ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]

When both the switch and the bridge are learning about new addresses,
switch ports attached to the bridge would see duplicate ARP frames
because both entities would attempt to send them.

Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
Reported-by: Maxime Bizon 
Signed-off-by: Florian Fainelli 
Reviewed-by: Vivien Didelot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: tag_qca: fix doubled Tx statistics

2020-01-23T07:19:41+00:00

[ Upstream commit bd5874da57edd001b35cf28ae737779498c16a56 ]

DSA subsystem takes care of netdev statistics since commit 4ed70ce9f01c
("net: dsa: Refactor transmit path to eliminate duplication"), so
any accounting inside tagger callbacks is redundant and can lead to
messing up the stats.
This bug is present in Qualcomm tagger since day 0.

Fixes: cafdc45c949b ("net-next: dsa: add Qualcomm tag RX/TX handler")
Reviewed-by: Andrew Lunn 
Signed-off-by: Alexander Lobakin 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: fix switch tree list

2019-11-10T10:23:26+00:00

[ Upstream commit 50c7d2ba9de20f60a2d527ad6928209ef67e4cdd ]

If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: slave: Don't propagate flag changes on down slave interfaces

2019-02-12T18:45:00+00:00

[ Upstream commit 17ab4f61b8cd6f9c38e9d0b935d86d73b5d0d2b5 ]

The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.

When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.

Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.

Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Rundong Ge 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Do not suspend/resume closed slave_dev

2018-08-06T14:23:03+00:00

[ Upstream commit a94c689e6c9e72e722f28339e12dff191ee5a265 ]

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: select NET_SWITCHDEV

2017-11-15T14:53:17+00:00

[ Upstream commit 3a89eaa65db68bf53bf92dedc60084f810e1779a ]

The support for DSA Ethernet switch chips depends on TCP/IP networking,
thus explicit that HAVE_NET_DSA depends on INET.

DSA uses SWITCHDEV, thus select it instead of depending on it.

Signed-off-by: Vivien Didelot 
Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Tested-by: Randy Dunlap 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Fix network device registration order

2017-10-12T09:51:22+00:00

[ Upstream commit e804441cfe0b60f6c430901946a69c01eac09df1 ]

We cannot be registering the network device first, then setting its
carrier off and finally connecting it to a PHY, doing that leaves a
window during which the carrier is at best inconsistent, and at worse
the device is not usable without a down/up sequence since the network
device is visible to user space with possibly no PHY device attached.

Re-order steps so that they make logical sense. This fixes some devices
where the port was not usable after e.g: an unbind then bind of the
driver.

Fixes: 0071f56e46da ("dsa: Register netdev before phy")
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Check return value of phy_connect_direct()

2017-07-05T12:40:23+00:00

[ Upstream commit 4078b76cac68e50ccf1f76a74e7d3d5788aec3fe ]

We need to check the return value of phy_connect_direct() in
dsa_slave_phy_connect() otherwise we may be continuing the
initialization of a slave network device with a PHY that already
attached somewhere else and which will soon be in error because the PHY
device is in error.

The conditions for such an error to occur are that we have a port of our
switch that is not disabled, and has the same port number as a PHY
address (say both 5) that can be probed using the DSA slave MII bus. We
end-up having this slave network device find a PHY at the same address
as our port number, and we try to attach to it.

A slave network (e.g: port 0) has already attached to our PHY device,
and we try to re-attach it with a different network device, but since we
ignore the error we would end-up initializating incorrect device
references by the time the slave network interface is opened.

The code has been (re)organized several times, making it hard to provide
an exact Fixes tag, this is a bugfix nonetheless.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: dsa: Do not destroy invalid network devices

2017-02-18T14:11:43+00:00

[ Upstream commit 382e1eea2d983cd2343482c6a638f497bb44a636 ]

dsa_slave_create() can fail, and dsa_user_port_unapply() will properly check
for the network device not being NULL before attempting to destroy it. We were
not setting the slave network device as NULL if dsa_slave_create() failed, so
we would later on be calling dsa_slave_destroy() on a now free'd and
unitialized network device, causing crashes in dsa_slave_destroy().

Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman