linux-stable.git/net/dns_resolver, branch linux-5.0.y Linux kernel stable tree dns: Allow the dns resolver to retrieve a server set 2018-10-04T16:40:52+00:00 David Howells dhowells@redhat.com 2018-10-04T13:27:55+00:00 bbb4c4323a4d9cb5ca04db904aa3050a7586839a Allow the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. In terms of communication with userspace, "srv=1" is added to the callout string (the '1' indicating the maximum data version supported by the kernel) to ask the userspace side for this. If the userspace side doesn't recognise it, it will ignore the option and return the usual text address list. If the userspace side does recognise it, it will return some binary data that begins with a zero byte that would cause the string parsers to give an error. The second byte contains the version of the data in the blob (this may be between 1 and the version specified in the callout data). The remainder of the payload is version-specific. In version 1, the payload looks like (note that this is packed): u8 Non-string marker (ie. 0) u8 Content (0 => Server list) u8 Version (ie. 1) u8 Source (eg. DNS_RECORD_FROM_DNS_SRV) u8 Status (eg. DNS_LOOKUP_GOOD) u8 Number of servers foreach-server { u16 Name length (LE) u16 Priority (as per SRV record) (LE) u16 Weight (as per SRV record) (LE) u16 Port (LE) u8 Source (eg. DNS_RECORD_FROM_NSS) u8 Status (eg. DNS_LOOKUP_GOT_NOT_FOUND) u8 Protocol (eg. DNS_SERVER_PROTOCOL_UDP) u8 Number of addresses char[] Name (not NUL-terminated) foreach-address { u8 Family (AF_INET{,6}) union { u8[4] ipv4_addr u8[16] ipv6_addr } } } This can then be used to fetch a whole cell's VL-server configuration for AFS, for example. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.

In terms of communication with userspace, "srv=1" is added to the callout
string (the '1' indicating the maximum data version supported by the
kernel) to ask the userspace side for this.

If the userspace side doesn't recognise it, it will ignore the option and
return the usual text address list.

If the userspace side does recognise it, it will return some binary data
that begins with a zero byte that would cause the string parsers to give an
error.  The second byte contains the version of the data in the blob (this
may be between 1 and the version specified in the callout data).  The
remainder of the payload is version-specific.

In version 1, the payload looks like (note that this is packed):

	u8	Non-string marker (ie. 0)
	u8	Content (0 => Server list)
	u8	Version (ie. 1)
	u8	Source (eg. DNS_RECORD_FROM_DNS_SRV)
	u8	Status (eg. DNS_LOOKUP_GOOD)
	u8	Number of servers
	foreach-server {
		u16	Name length (LE)
		u16	Priority (as per SRV record) (LE)
		u16	Weight (as per SRV record) (LE)
		u16	Port (LE)
		u8	Source (eg. DNS_RECORD_FROM_NSS)
		u8	Status (eg. DNS_LOOKUP_GOT_NOT_FOUND)
		u8	Protocol (eg. DNS_SERVER_PROTOCOL_UDP)
		u8	Number of addresses
		char[]	Name (not NUL-terminated)
		foreach-address {
			u8		Family (AF_INET{,6})
			union {
				u8[4]	ipv4_addr
				u8[16]	ipv6_addr
			}
		}
	}

This can then be used to fetch a whole cell's VL-server configuration for
AFS, for example.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: remove blank lines at end of file 2018-07-24T21:10:43+00:00 Stephen Hemminger stephen@networkplumber.org 2018-07-24T19:29:18+00:00 e446a2760f1e265192accd7ddebd3ca5ff1d57bb Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Several files have extra line at end of file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
KEYS: DNS: fix parsing multiple options 2018-07-16T18:22:14+00:00 Eric Biggers ebiggers@google.com 2018-07-11T17:46:29+00:00 c604cb767049b78b3075497b80ebb8fd530ea2cc My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
My recent fix for dns_resolver_preparse() printing very long strings was
incomplete, as shown by syzbot which still managed to hit the
WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key:

    precision 50001 too large
    WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0

The bug this time isn't just a printing bug, but also a logical error
when multiple options ("#"-separated strings) are given in the key
payload.  Specifically, when separating an option string into name and
value, if there is no value then the name is incorrectly considered to
end at the end of the key payload, rather than the end of the current
option.  This bypasses validation of the option length, and also means
that specifying multiple options is broken -- which presumably has gone
unnoticed as there is currently only one valid option anyway.

A similar problem also applied to option values, as the kstrtoul() when
parsing the "dnserror" option will read past the end of the current
option and into the next option.

Fix these bugs by correctly computing the length of the option name and
by copying the option value, null-terminated, into a temporary buffer.

Reproducer for the WARN_ONCE() that syzbot hit:

    perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s

Reproducer for "dnserror" option being parsed incorrectly (expected
behavior is to fail when seeing the unknown option "foo", actual
behavior was to read the dnserror value as "1#foo" and fail there):

    perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KEYS: DNS: limit the length of option strings 2018-04-17T19:17:41+00:00 Eric Biggers ebiggers@google.com 2018-04-17T19:07:06+00:00 9c438d7a3a52dcc2b9ed095cb87d3a5e83cf7e60 Adding a dns_resolver key whose payload contains a very long option name resulted in that string being printed in full. This hit the WARN_ONCE() in set_precision() during the printk(), because printk() only supports a precision of up to 32767 bytes: precision 1000000 too large WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0 Fix it by limiting option strings (combined name + value) to a much more reasonable 128 bytes. The exact limit is arbitrary, but currently the only recognized option is formatted as "dnserror=%lu" which fits well within this limit. Also ratelimit the printks. Reproducer: perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s This bug was found using syzkaller. Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Adding a dns_resolver key whose payload contains a very long option name
resulted in that string being printed in full.  This hit the WARN_ONCE()
in set_precision() during the printk(), because printk() only supports a
precision of up to 32767 bytes:

    precision 1000000 too large
    WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0

Fix it by limiting option strings (combined name + value) to a much more
reasonable 128 bytes.  The exact limit is arbitrary, but currently the
only recognized option is formatted as "dnserror=%lu" which fits well
within this limit.

Also ratelimit the printks.

Reproducer:

    perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s

This bug was found using syzkaller.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Use octal not symbolic permissions 2018-03-26T16:07:48+00:00 Joe Perches joe@perches.com 2018-03-23T22:54:38+00:00 d6444062f8f07c346a21bd815af4a3dc8b231574 Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
afs: Support the AFS dynamic root 2018-02-06T14:43:37+00:00 David Howells dhowells@redhat.com 2018-02-06T06:26:30+00:00 4d673da14533b32fe8d3125b5b7be4fea14e39a8 Support the AFS dynamic root which is a pseudo-volume that doesn't connect to any server resource, but rather is just a root directory that dynamically creates mountpoint directories where the name of such a directory is the name of the cell. Such a mount can be created thus: mount -t afs none /afs -o dyn Dynamic root superblocks aren't shared except by bind mounts and propagation. Cell root volumes can then be mounted by referring to them by name, e.g.: ls /afs/grand.central.org/ ls /afs/.grand.central.org/ The kernel will upcall to consult the DNS if the address wasn't supplied directly. Signed-off-by: David Howells <dhowells@redhat.com> 
Support the AFS dynamic root which is a pseudo-volume that doesn't connect
to any server resource, but rather is just a root directory that
dynamically creates mountpoint directories where the name of such a
directory is the name of the cell.

Such a mount can be created thus:

	mount -t afs none /afs -o dyn

Dynamic root superblocks aren't shared except by bind mounts and
propagation.  Cell root volumes can then be mounted by referring to them by
name, e.g.:

	ls /afs/grand.central.org/
	ls /afs/.grand.central.org/

The kernel will upcall to consult the DNS if the address wasn't supplied
directly.

Signed-off-by: David Howells <dhowells@redhat.com>
KEYS: Fix race between updating and finding a negative key 2017-10-18T08:12:40+00:00 David Howells dhowells@redhat.com 2017-10-04T15:43:25+00:00 363b02dab09b3226f3bd1420dad9c72b79a42a76 Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com> 
Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection
error into one field such that:

 (1) The instantiation state can be modified/read atomically.

 (2) The error can be accessed atomically with the state.

 (3) The error isn't stored unioned with the payload pointers.

This deals with the problem that the state is spread over three different
objects (two bits and a separate variable) and reading or updating them
atomically isn't practical, given that not only can uninstantiated keys
change into instantiated or rejected keys, but rejected keys can also turn
into instantiated keys - and someone accessing the key might not be using
any locking.

The main side effect of this problem is that what was held in the payload
may change, depending on the state.  For instance, you might observe the
key to be in the rejected state.  You then read the cached error, but if
the key semaphore wasn't locked, the key might've become instantiated
between the two reads - and you might now have something in hand that isn't
actually an error code.

The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error
code if the key is negatively instantiated.  The key_is_instantiated()
function is replaced with key_is_positive() to avoid confusion as negative
keys are also 'instantiated'.

Additionally, barriering is included:

 (1) Order payload-set before state-set during instantiation.

 (2) Order state-read before payload-read when using the key.

Further separate barriering is necessary if RCU is being used to access the
payload content after reading the payload pointers.

Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data")
Cc: stable@vger.kernel.org # v4.4+
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2017-03-03T18:16:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-03-03T18:16:38+00:00 1827adb11ad26b2290dc9fe2aaf54976b2439865 Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ... 
Pull sched.h split-up from Ingo Molnar:
 "The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...
sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h> 2017-03-02T07:42:31+00:00 Ingo Molnar mingo@kernel.org 2017-02-02T16:54:15+00:00 5b825c3af1d8a0af4deb4a5eb349d0d0050c62e5 Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload() 2017-03-01T23:09:00+00:00 David Howells dhowells@redhat.com 2017-03-01T15:11:23+00:00 0837e49ab3fa8d903a499984575d71efee8097ce rcu_dereference_key() and user_key_payload() are currently being used in two different, incompatible ways: (1) As a wrapper to rcu_dereference() - when only the RCU read lock used to protect the key. (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is used to protect the key and the may be being modified. Fix this by splitting both of the key wrappers to produce: (1) RCU accessors for keys when caller has the key semaphore locked: dereference_key_locked() user_key_payload_locked() (2) RCU accessors for keys when caller holds the RCU read lock: dereference_key_rcu() user_key_payload_rcu() This should fix following warning in the NFS idmapper =============================== [ INFO: suspicious RCU usage. ] 4.10.0 #1 Tainted: G W ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 1 lock held by mount.nfs/5987: #0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4] stack backtrace: CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1 Call Trace: dump_stack+0xe8/0x154 (unreliable) lockdep_rcu_suspicious+0x140/0x190 nfs_idmap_get_key+0x380/0x420 [nfsv4] nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4] decode_getfattr_attrs+0xfac/0x16b0 [nfsv4] decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4] nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4] rpcauth_unwrap_resp+0xe8/0x140 [sunrpc] call_decode+0x29c/0x910 [sunrpc] __rpc_execute+0x140/0x8f0 [sunrpc] rpc_run_task+0x170/0x200 [sunrpc] nfs4_call_sync_sequence+0x68/0xa0 [nfsv4] _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4] nfs4_lookup_root+0xe0/0x350 [nfsv4] nfs4_lookup_root_sec+0x70/0xa0 [nfsv4] nfs4_find_root_sec+0xc4/0x100 [nfsv4] nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4] nfs4_get_rootfh+0x6c/0x190 [nfsv4] nfs4_server_common_setup+0xc4/0x260 [nfsv4] nfs4_create_server+0x278/0x3c0 [nfsv4] nfs4_remote_mount+0x50/0xb0 [nfsv4] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 nfs_do_root_mount+0xb0/0x140 [nfsv4] nfs4_try_mount+0x60/0x100 [nfsv4] nfs_fs_mount+0x5ec/0xda0 [nfs] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 do_mount+0x254/0xf70 SyS_mount+0x94/0x100 system_call+0x38/0xe0 Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> 
rcu_dereference_key() and user_key_payload() are currently being used in
two different, incompatible ways:

 (1) As a wrapper to rcu_dereference() - when only the RCU read lock used
     to protect the key.

 (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is
     used to protect the key and the may be being modified.

Fix this by splitting both of the key wrappers to produce:

 (1) RCU accessors for keys when caller has the key semaphore locked:

	dereference_key_locked()
	user_key_payload_locked()

 (2) RCU accessors for keys when caller holds the RCU read lock:

	dereference_key_rcu()
	user_key_payload_rcu()

This should fix following warning in the NFS idmapper

  ===============================
  [ INFO: suspicious RCU usage. ]
  4.10.0 #1 Tainted: G        W
  -------------------------------
  ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
  other info that might help us debug this:
  rcu_scheduler_active = 2, debug_locks = 0
  1 lock held by mount.nfs/5987:
    #0:  (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4]
  stack backtrace:
  CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G        W       4.10.0 #1
  Call Trace:
    dump_stack+0xe8/0x154 (unreliable)
    lockdep_rcu_suspicious+0x140/0x190
    nfs_idmap_get_key+0x380/0x420 [nfsv4]
    nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4]
    decode_getfattr_attrs+0xfac/0x16b0 [nfsv4]
    decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4]
    nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4]
    rpcauth_unwrap_resp+0xe8/0x140 [sunrpc]
    call_decode+0x29c/0x910 [sunrpc]
    __rpc_execute+0x140/0x8f0 [sunrpc]
    rpc_run_task+0x170/0x200 [sunrpc]
    nfs4_call_sync_sequence+0x68/0xa0 [nfsv4]
    _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4]
    nfs4_lookup_root+0xe0/0x350 [nfsv4]
    nfs4_lookup_root_sec+0x70/0xa0 [nfsv4]
    nfs4_find_root_sec+0xc4/0x100 [nfsv4]
    nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4]
    nfs4_get_rootfh+0x6c/0x190 [nfsv4]
    nfs4_server_common_setup+0xc4/0x260 [nfsv4]
    nfs4_create_server+0x278/0x3c0 [nfsv4]
    nfs4_remote_mount+0x50/0xb0 [nfsv4]
    mount_fs+0x74/0x210
    vfs_kern_mount+0x78/0x220
    nfs_do_root_mount+0xb0/0x140 [nfsv4]
    nfs4_try_mount+0x60/0x100 [nfsv4]
    nfs_fs_mount+0x5ec/0xda0 [nfs]
    mount_fs+0x74/0x210
    vfs_kern_mount+0x78/0x220
    do_mount+0x254/0xf70
    SyS_mount+0x94/0x100
    system_call+0x38/0xe0

Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>