If a socket bound to a wildcard address fails to connect(), we
only reset saddr and keep the port.  Then, we have to fix up the
bhash2 bucket; otherwise, the bucket has an inconsistent address
in the list.

Also, listen() for such a socket will fire the WARN_ON() in
inet_csk_get_port(). [0]

Note that when a system runs out of memory, we give up fixing the
bucket and unlink sk from bhash and bhash2 by inet_put_port().

[0]:
WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Modules linked in:
CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff
RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202
RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000
RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff
RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280
FS:  00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205)
 inet_listen (net/ipv4/af_inet.c:228)
 __sys_listen (net/socket.c:1810)
 __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f8ac051de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d
RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007
R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388
R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000
 </TASK>

Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly.  However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.

Let's update saddr under the bhash bucket's lock.

Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address.  If the socket
fails to connect() to the destination, we have to reset the saddr.

However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.

From the user's point of view, whether saddr is reset or not varies
with errno.  Let's fix this inconsistent behaviour.

Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.

For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:

  s1 = socket()
  s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
  s1.bind(('127.0.0.1', 10000))
  s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
  # or s1.connect(('127.0.0.1', 10000))

  s2 = socket()
  s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
  s2.bind(('0.0.0.0', 10000))
  s2.connect(('127.0.0.1', 10000))  # -EADDRNOTAVAIL

  s2.listen(32)  # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);

[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09

Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done
mechanically with this coccinelle script:

@@
expression E;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
typedef __be16;
typedef __le16;
typedef u8;
@@
(
- (get_random_u32() & 0xffff)
+ get_random_u16()
|
- (get_random_u32() & 0xff)
+ get_random_u8()
|
- (get_random_u32() % 65536)
+ get_random_u16()
|
- (get_random_u32() % 256)
+ get_random_u8()
|
- (get_random_u32() >> 16)
+ get_random_u16()
|
- (get_random_u32() >> 24)
+ get_random_u8()
|
- (u16)get_random_u32()
+ get_random_u16()
|
- (u8)get_random_u32()
+ get_random_u8()
|
- (__be16)get_random_u32()
+ (__be16)get_random_u16()
|
- (__le16)get_random_u32()
+ (__le16)get_random_u16()
|
- prandom_u32_max(65536)
+ get_random_u16()
|
- prandom_u32_max(256)
+ get_random_u8()
|
- E->inet_id = get_random_u32()
+ E->inet_id = get_random_u16()
)

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
identifier v;
@@
- u16 v = get_random_u32();
+ u16 v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
identifier v;
@@
- u8 v = get_random_u32();
+ u8 v = get_random_u8();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
u16 v;
@@
-  v = get_random_u32();
+  v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
u8 v;
@@
-  v = get_random_u32();
+  v = get_random_u8();

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Examine limits
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value < 256:
        coccinelle.RESULT = cocci.make_ident("get_random_u8")
elif value < 65536:
        coccinelle.RESULT = cocci.make_ident("get_random_u16")
else:
        print("Skipping large mask of %s" % (literal))
        cocci.include_match(False)

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
identifier add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       (RESULT() & LITERAL)

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The current bind hashtable (bhash) is hashed by port only.
In the socket bind path, we have to check for bind conflicts by
traversing the specified port's inet_bind_bucket while holding the
hashbucket's spinlock (see inet_csk_get_port() and
inet_csk_bind_conflict()). In instances where there are tons of
sockets hashed to the same port at different addresses, the bind
conflict check is time-intensive and can cause softirq cpu lockups,
as well as stops new tcp connections since __inet_inherit_port()
also contests for the spinlock.

This patch adds a second bind table, bhash2, that hashes by
port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6).
Searching the bhash2 table leads to significantly faster conflict
resolution and less time holding the hashbucket spinlock.

Please note a few things:
* There can be the case where the a socket's address changes after it
has been bound. There are two cases where this happens:

  1) The case where there is a bind() call on INADDR_ANY (ipv4) or
  IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will
  assign the socket an address when it handles the connect()

  2) In inet_sk_reselect_saddr(), which is called when rebuilding the
  sk header and a few pre-conditions are met (eg rerouting fails).

In these two cases, we need to update the bhash2 table by removing the
entry for the old address, and add a new entry reflecting the updated
address.

* The bhash2 table must have its own lock, even though concurrent
accesses on the same port are protected by the bhash lock. Bhash2 must
have its own lock to protect against cases where sockets on different
ports hash to different bhash hashbuckets but to the same bhash2
hashbucket.

This brings up a few stipulations:
  1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock
  will always be acquired after the bhash lock and released before the
  bhash lock is released.

  2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always
  acquired+released before another bhash2 lock is acquired+released.

* The bhash table cannot be superseded by the bhash2 table because for
bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket
bound to that port must be checked for a potential conflict. The bhash
table is the only source of port->socket associations.

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mellanox/mlx5/core/main.c
  b33886971dbc ("net/mlx5: Initialize flow steering during driver probe")
  40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support")
  f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table")
https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/
  16d42d313350 ("net/mlx5: Drain fw_reset when removing device")
  8324a02c342a ("net/mlx5: Add exit route when waiting for FW")
https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
  e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
  b6e074e171bc ("selftests: mptcp: add infinite map testcase")
  5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/

net/mptcp/options.c
  ba2c89e0ea74 ("mptcp: fix checksum byte order")
  1e39e5a32ad7 ("mptcp: infinite mapping sending")
  ea66758c1795 ("tcp: allow MPTCP to update the announced window")
https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/

net/mptcp/pm.c
  95d686517884 ("mptcp: fix subflow accounting on close")
  4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/

net/mptcp/subflow.c
  ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure")
  0348c690ed37 ("mptcp: add the fallback check")
  f8d4bcacff3b ("mptcp: infinite mapping receiving")
https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When reading listener sk->sk_bound_dev_if locklessly,
we must use READ_ONCE().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commits:

0dad4087a86a2cbe177404dc73f18ada26a2c390 ("tcp/dccp: get rid of inet_twsk_purge()")
d507204d3c5cc57d9a8bdf0a477615bb59ea1611 ("tcp/dccp: add tw->tw_bslot")

As Leonard pointed out, a newly allocated netns can happen
to reuse a freed 'struct net'.

While TCP TW timers were covered by my patches, other things were not:

1) Lookups in rx path (INET_MATCH() and INET6_MATCH()), as they look
  at 4-tuple plus the 'struct net' pointer.

2) /proc/net/tcp[6] and inet_diag, same reason.

3) hashinfo->bhash[], same reason.

Fixing all this seems risky, lets instead revert.

In the future, we might have a per netns tcp hash table, or
a per netns list of timewait sockets...

Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.

This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:

  1- Drop the tos parameter from ip_route_connect(): its value was
     entirely based on sk, which is also passed as parameter.

  2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
     instead of always initialising it with RT_SCOPE_UNIVERSE (let's
     define ip_sock_rt_scope() for this purpose).

  3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
     now properly initialised, we don't need to tell ip_rt_fix_tos() to
     adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
     which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
     bit overload.

Note:
  In the original ip_route_connect() code, __ip_route_output_key()
  might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
  ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
  original tos variable. Now that we don't set RTO_ONLINK any more,
  this is not a problem and we can use fl4->flowi4_tos in
  flowi4_update_output().

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior patches in the series made sure tw_timer_handler()
can be fired after netns has been dismantled/freed.

We no longer have to scan a potentially big TCP ehash
table at netns dismantle.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>