When GRO attempts to aggregate IPv6 packets beyond GRO_LEGACY_MAX_SIZE
(64KB), the aggregate should only be permitted for plain IPv6 TCP flows
that have sufficient MAC header room to insert the temporary HBH jumbo header.
In 6.1.y, skb_gro_receive() had two issues with this check:
1. It checked skb_headroom(p) instead of the actual space before the MAC
header (p->mac_header). Because skb_headroom(p) measures (data - head),
it includes mac_len. Crafted frames (e.g. injected via AF_PACKET) can
pass the check with p->mac_header < 8 bytes. When ipv6_gro_complete()
inserts the temporary HBH jumbo header, the memmove() starts before
skb->head, causing an out-of-bounds write and wrapping skb->mac_header.
2. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
which is 0 during receive, failing to reject encapsulated IPv6 flows
(such as IP6IP6).
Fix skb_gro_receive() to strictly check:
- p->protocol == htons(ETH_P_IPV6)
- p->mac_header >= sizeof(struct hop_jumbo_hdr)
- ipv6_hdr(p)->nexthdr == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.
This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.
Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Reported-by: Sam Dlinn <sledge@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 817ff6efdb7f484ea547218e11e17d8e43daa3b4 ]
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list.
Fixes: 39df232f1a9b ("[PKTGEN]: fix device name handling")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260719145740.2888967-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 870b856cb478bc02fffe4d89897e62c692efb09a ]
Fix checkpatch code style warnings:
WARNING: Block comments use a trailing */ on a separate line
+ * removal by worker thread */
WARNING: Block comments use * on subsequent lines
+ __u8 tos; /* six MSB of (former) IPv4 TOS
+ are for dscp codepoint */
WARNING: Block comments use a trailing */ on a separate line
+ are for dscp codepoint */
WARNING: Block comments use * on subsequent lines
+ __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use a trailing */ on a separate line
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use * on subsequent lines
+ /* = {
+ 0x00, 0x80, 0xC8, 0x79, 0xB3, 0xCB,
WARNING: Block comments use * on subsequent lines
+ /* Field for thread to receive "posted" events terminate,
+ stop ifs etc. */
WARNING: Block comments use a trailing */ on a separate line
+ stop ifs etc. */
WARNING: Block comments should align the * on each line
+ * we go look for it ...
+*/
WARNING: Block comments use a trailing */ on a separate line
+ * we resolve the dst issue */
WARNING: Block comments use a trailing */ on a separate line
+ * with proc_create_data() */
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 817ff6efdb7f ("net: pktgen: fix proc entry use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e751256486d0ded20f5a9f9863467f1dce65142f ]
Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO
packet.") added a flush check to skb_gro_receive(), but
skb_gro_receive_list() lacks the same validation.
As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be
re-aggregated.
This allows already-GRO'd packets with existing frag_list to be
re-aggregated into a new GRO session, corrupting the frag_list chain
structure. When skb_segment() attempts to unpack these malformed packets,
it encounters invalid state and triggers a kernel panic.
Scenario (Tethering/Device forwarding):
1. Driver: Generated aggregated packet P1 via LRO with frag_list
2. Dev A: Receives aggregated fraglist packet and flush flag set
3. Dev A: Re-enters GRO, skb_gro_receive_list() is called
4. Missing flush check allows re-aggregation despite flush flag
5. Frag_list chain becomes corrupted (loops or dangling refs)
6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list
Root cause in skb_segment():
The check at line ~4891:
if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) &&
(skb_headlen(list_skb) == len || sg)) {
When frag_list is corrupted by double aggregation, when list_skb is
a NULL pointer from skb->next, skb_headlen(list_skb) dereference
NULL/corrupted pointers occurs.
Call Trace:
skb_headlen(NULL skb)
skb_segment
tcp_gso_segment
tcp4_gso_segment
inet_gso_segment
skb_mac_gso_segment
__skb_gso_segment
skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
qdisc_restart
__qdisc_run
qdisc_run
net_tx_action
Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in
skb_gro_receive_list(), matching the defensive programming pattern of
skb_gro_receive().
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Cc: stable@vger.kernel.org
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260709014704.3625-1-shiming.cheng@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8928756d53d5b99dcd18073dc7738b8ebdbe7d96 ]
This helper function will be used for TCP fraglist GRO support
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e751256486d0 ("net: gro: fix double aggregation of flush-marked skbs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e48e8edbef2eb824201495daa5234560f632b23c upstream.
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Link: https://patch.msgid.link/6b2afef5d1738763c6965e8e466eb16e43e4f956.1785757386.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b8a39a09ae4eaae04309e1e38ed6a1101d967496 ]
sk_mc_loop() can be called for sockets that are neither AF_INET
nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet
socket over virtual devices such as VRF or ipvlan).
In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls
through the switch statement and triggers WARN_ON_ONCE(1).
Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP
options, so loopback should default to true without generating a warning.
Fixes: f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Reported-by: syzbot+22c3218a6fa219e47321@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a72024c.13623e66.bdc14.0019.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260804152048.2134341-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 88c17de85ddb459c3fe1e3c65d61fa366b1cf0a8 upstream.
bpf_lwt_xmit_reroute() obtains a referenced dst from the route
lookup. When skb_cow_head() fails before that dst is installed on the
skb, the error path only frees the skb. The skb still owns its previous
dst, so the newly looked up dst reference is leaked.
Release the new dst reference before freeing the skb on this error
path.
Fixes: 3bd0b15281af ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260723060445.21926-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8dfd42c17faf183415323db1ef0c977be0d6489 ]
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e876b75b9020 ("ipvs: fix the checksum validations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66efd3368ae10d05e08fbe6425b50fdec7186ac7 ]
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign").
Fixes: 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-2-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>