linux-stable.git/net/core, branch v5.2.12 Linux kernel stable tree tcp: make sure EPOLLOUT wont be missed 2019-09-06T08:23:32+00:00 Eric Dumazet edumazet@google.com 2019-08-17T04:26:22+00:00 ae154dcba8f4fc51d0ab4a7e81ac10003128f663 [ Upstream commit ef8d8ccdc216f797e66cb4a1372f5c4c285ce1e4 ] As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure"), it is crucial we properly set SOCK_NOSPACE when needed. However, Jason patch had a bug, because the 'nonblocking' status as far as sk_stream_wait_memory() is concerned is governed by MSG_DONTWAIT flag passed at sendmsg() time : long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT); So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(), and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE cleared, if sk->sk_sndtimeo has been set to a small (but not zero) value. This patch removes the 'noblock' variable since we must always set SOCK_NOSPACE if -EAGAIN is returned. It also renames the do_nonblock label since we might reach this code path even if we were in blocking mode. Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: Vladimir Rutsky <rutsky@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit ef8d8ccdc216f797e66cb4a1372f5c4c285ce1e4 ]

As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.

However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :

    long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);

So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.

This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.

It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.

Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: Vladimir Rutsky  <rutsky@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: sockmap, only create entry if ulp is not already enabled 2019-08-29T06:30:00+00:00 John Fastabend john.fastabend@gmail.com 2019-07-19T17:29:21+00:00 5c447c1951cddf1c0e79ac77e706107a28d675cc [ Upstream commit 0e858739c2d2eedeeac1d35bfa0ec3cc2a7190d8 ] Sockmap does not currently support adding sockets after TLS has been enabled. There never was a real use case for this so it was never added. But, we lost the test for ULP at some point so add it here and fail the socket insert if TLS is enabled. Future work could make sockmap support this use case but fixup the bug here. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e858739c2d2eedeeac1d35bfa0ec3cc2a7190d8 ]

Sockmap does not currently support adding sockets after TLS has been
enabled. There never was a real use case for this so it was never
added. But, we lost the test for ULP at some point so add it here
and fail the socket insert if TLS is enabled. Future work could
make sockmap support this use case but fixup the bug here.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: sockmap, synchronize_rcu before free'ing map 2019-08-29T06:29:57+00:00 John Fastabend john.fastabend@gmail.com 2019-07-19T17:29:20+00:00 47032e94979e01100de1ba846c40d5adf2a30ab4 [ Upstream commit 2bb90e5cc90e1d09f631aeab041a9cf913a5bbe5 ] We need to have a synchronize_rcu before free'ing the sockmap because any outstanding psock references will have a pointer to the map and when they use this could trigger a use after free. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2bb90e5cc90e1d09f631aeab041a9cf913a5bbe5 ]

We need to have a synchronize_rcu before free'ing the sockmap because
any outstanding psock references will have a pointer to the map and
when they use this could trigger a use after free.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: sockmap, sock_map_delete needs to use xchg 2019-08-29T06:29:54+00:00 John Fastabend john.fastabend@gmail.com 2019-07-19T17:29:19+00:00 2a574254d6f59b4e5f64277712c2480e74ef1bc6 [ Upstream commit 45a4521dcbd92e71c9e53031b40e34211d3b4feb ] __sock_map_delete() may be called from a tcp event such as unhash or close from the following trace, tcp_bpf_close() tcp_bpf_remove() sk_psock_unlink() sock_map_delete_from_link() __sock_map_delete() In this case the sock lock is held but this only protects against duplicate removals on the TCP side. If the map is free'd then we have this trace, sock_map_free xchg() <- replaces map entry sock_map_unref() sk_psock_put() sock_map_del_link() The __sock_map_delete() call however uses a read, test, null over the map entry which can result in both paths trying to free the map entry. To fix use xchg in TCP paths as well so we avoid having two references to the same map entry. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 45a4521dcbd92e71c9e53031b40e34211d3b4feb ]

__sock_map_delete() may be called from a tcp event such as unhash or
close from the following trace,

  tcp_bpf_close()
    tcp_bpf_remove()
      sk_psock_unlink()
        sock_map_delete_from_link()
          __sock_map_delete()

In this case the sock lock is held but this only protects against
duplicate removals on the TCP side. If the map is free'd then we have
this trace,

  sock_map_free
    xchg()                  <- replaces map entry
    sock_map_unref()
      sk_psock_put()
        sock_map_del_link()

The __sock_map_delete() call however uses a read, test, null over the
map entry which can result in both paths trying to free the map
entry.

To fix use xchg in TCP paths as well so we avoid having two references
to the same map entry.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net/tls: prevent skb_orphan() from leaking TLS plain text with offload 2019-08-25T14:10:38+00:00 Jakub Kicinski jakub.kicinski@netronome.com 2019-08-08T00:03:59+00:00 bc110443a73f275de83d691bccbba9ecd25ca9be [ Upstream commit 414776621d1006e57e80e6db7fdc3837897aaa64 ] sk_validate_xmit_skb() and drivers depend on the sk member of struct sk_buff to identify segments requiring encryption. Any operation which removes or does not preserve the original TLS socket such as skb_orphan() or skb_clone() will cause clear text leaks. Make the TCP socket underlying an offloaded TLS connection mark all skbs as decrypted, if TLS TX is in offload mode. Then in sk_validate_xmit_skb() catch skbs which have no socket (or a socket with no validation) and decrypted flag set. Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and sk->sk_validate_xmit_skb are slightly interchangeable right now, they all imply TLS offload. The new checks are guarded by CONFIG_TLS_DEVICE because that's the option guarding the sk_buff->decrypted member. Second, smaller issue with orphaning is that it breaks the guarantee that packets will be delivered to device queues in-order. All TLS offload drivers depend on that scheduling property. This means skb_orphan_partial()'s trick of preserving partial socket references will cause issues in the drivers. We need a full orphan, and as a result netem delay/throttling will cause all TLS offload skbs to be dropped. Reusing the sk_buff->decrypted flag also protects from leaking clear text when incoming, decrypted skb is redirected (e.g. by TC). See commit 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP") for justification why the internal flag is safe. The only location which could leak the flag in is tcp_bpf_sendmsg(), which is taken care of by clearing the previously unused bit. v2: - remove superfluous decrypted mark copy (Willem); - remove the stale doc entry (Boris); - rely entirely on EOR marking to prevent coalescing (Boris); - use an internal sendpages flag instead of marking the socket (Boris). v3 (Willem): - reorganize the can_skb_orphan_partial() condition; - fix the flag leak-in through tcp_bpf_sendmsg. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 414776621d1006e57e80e6db7fdc3837897aaa64 ]

sk_validate_xmit_skb() and drivers depend on the sk member of
struct sk_buff to identify segments requiring encryption.
Any operation which removes or does not preserve the original TLS
socket such as skb_orphan() or skb_clone() will cause clear text
leaks.

Make the TCP socket underlying an offloaded TLS connection
mark all skbs as decrypted, if TLS TX is in offload mode.
Then in sk_validate_xmit_skb() catch skbs which have no socket
(or a socket with no validation) and decrypted flag set.

Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and
sk->sk_validate_xmit_skb are slightly interchangeable right now,
they all imply TLS offload. The new checks are guarded by
CONFIG_TLS_DEVICE because that's the option guarding the
sk_buff->decrypted member.

Second, smaller issue with orphaning is that it breaks
the guarantee that packets will be delivered to device
queues in-order. All TLS offload drivers depend on that
scheduling property. This means skb_orphan_partial()'s
trick of preserving partial socket references will cause
issues in the drivers. We need a full orphan, and as a
result netem delay/throttling will cause all TLS offload
skbs to be dropped.

Reusing the sk_buff->decrypted flag also protects from
leaking clear text when incoming, decrypted skb is redirected
(e.g. by TC).

See commit 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect
through ULP") for justification why the internal flag is safe.
The only location which could leak the flag in is tcp_bpf_sendmsg(),
which is taken care of by clearing the previously unused bit.

v2:
 - remove superfluous decrypted mark copy (Willem);
 - remove the stale doc entry (Boris);
 - rely entirely on EOR marking to prevent coalescing (Boris);
 - use an internal sendpages flag instead of marking the socket
   (Boris).
v3 (Willem):
 - reorganize the can_skb_orphan_partial() condition;
 - fix the flag leak-in through tcp_bpf_sendmsg.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: fix access to skb_shared_info->gso_segs 2019-08-25T14:10:23+00:00 Eric Dumazet edumazet@google.com 2019-07-23T10:15:37+00:00 27843db1180c7144393b9b2c182c081631a1a20a commit 06a22d897d82f12776d44dbf0850f5895469cb2a upstream. It is possible we reach bpf_convert_ctx_access() with si->dst_reg == si->src_reg Therefore, we need to load BPF_REG_AX before eventually mangling si->src_reg. syzbot generated this x86 code : 3: 55 push %rbp 4: 48 89 e5 mov %rsp,%rbp 7: 48 81 ec 00 00 00 00 sub $0x0,%rsp // Might be avoided ? e: 53 push %rbx f: 41 55 push %r13 11: 41 56 push %r14 13: 41 57 push %r15 15: 6a 00 pushq $0x0 17: 31 c0 xor %eax,%eax 19: 48 8b bf c0 00 00 00 mov 0xc0(%rdi),%rdi 20: 44 8b 97 bc 00 00 00 mov 0xbc(%rdi),%r10d 27: 4c 01 d7 add %r10,%rdi 2a: 48 0f b7 7f 06 movzwq 0x6(%rdi),%rdi // Crash 2f: 5b pop %rbx 30: 41 5f pop %r15 32: 41 5e pop %r14 34: 41 5d pop %r13 36: 5b pop %rbx 37: c9 leaveq 38: c3 retq Fixes: d9ff286a0f59 ("bpf: allow BPF programs access skb_shared_info->gso_segs field") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 06a22d897d82f12776d44dbf0850f5895469cb2a upstream.

It is possible we reach bpf_convert_ctx_access() with
si->dst_reg == si->src_reg

Therefore, we need to load BPF_REG_AX before eventually
mangling si->src_reg.

syzbot generated this x86 code :
   3:   55                      push   %rbp
   4:   48 89 e5                mov    %rsp,%rbp
   7:   48 81 ec 00 00 00 00    sub    $0x0,%rsp // Might be avoided ?
   e:   53                      push   %rbx
   f:   41 55                   push   %r13
  11:   41 56                   push   %r14
  13:   41 57                   push   %r15
  15:   6a 00                   pushq  $0x0
  17:   31 c0                   xor    %eax,%eax
  19:   48 8b bf c0 00 00 00    mov    0xc0(%rdi),%rdi
  20:   44 8b 97 bc 00 00 00    mov    0xbc(%rdi),%r10d
  27:   4c 01 d7                add    %r10,%rdi
  2a:   48 0f b7 7f 06          movzwq 0x6(%rdi),%rdi // Crash
  2f:   5b                      pop    %rbx
  30:   41 5f                   pop    %r15
  32:   41 5e                   pop    %r14
  34:   41 5d                   pop    %r13
  36:   5b                      pop    %rbx
  37:   c9                      leaveq
  38:   c3                      retq

Fixes: d9ff286a0f59 ("bpf: allow BPF programs access skb_shared_info->gso_segs field")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: fix bpf_xdp_adjust_head regression for generic-XDP 2019-08-09T15:51:47+00:00 Jesper Dangaard Brouer brouer@redhat.com 2019-08-01T18:00:31+00:00 78407cb40864a21b677f9f9b28f62251a4146997 [ Upstream commit 065af355470519bd184019a93ac579f22b036045 ] When generic-XDP was moved to a later processing step by commit 458bf2f224f0 ("net: core: support XDP generic on stacked devices.") a regression was introduced when using bpf_xdp_adjust_head. The issue is that after this commit the skb->network_header is now changed prior to calling generic XDP and not after. Thus, if the header is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header also need to be updated again. Fix by calling skb_reset_network_header(). Fixes: 458bf2f224f0 ("net: core: support XDP generic on stacked devices.") Reported-by: Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 065af355470519bd184019a93ac579f22b036045 ]

When generic-XDP was moved to a later processing step by commit
458bf2f224f0 ("net: core: support XDP generic on stacked devices.")
a regression was introduced when using bpf_xdp_adjust_head.

The issue is that after this commit the skb->network_header is now
changed prior to calling generic XDP and not after. Thus, if the header
is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header
also need to be updated again.  Fix by calling skb_reset_network_header().

Fixes: 458bf2f224f0 ("net: core: support XDP generic on stacked devices.")
Reported-by: Brandon Cazander <brandon.cazander@multapplied.net>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: fix ifindex collision during namespace removal 2019-08-09T15:51:44+00:00 Jiri Pirko jiri@mellanox.com 2019-07-28T12:56:36+00:00 abf0c1014c94a6bada7723fa08047ff86f9f0796 [ Upstream commit 55b40dbf0e76b4bfb9d8b3a16a0208640a9a45df ] Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 55b40dbf0e76b4bfb9d8b3a16a0208640a9a45df ]

Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions
on net_ns stop.") introduced a possibility to hit a BUG in case device
is returning back to init_net and two following conditions are met:
1) dev->ifindex value is used in a name of another "dev%d"
   device in init_net.
2) dev->name is used by another device in init_net.

Under real life circumstances this is hard to get. Therefore this has
been present happily for over 10 years. To reproduce:

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip netns add ns1
$ ip -n ns1 link add dummy1ns1 type dummy
$ ip -n ns1 link add dummy2ns1 type dummy
$ ip link set enp0s2 netns ns1
$ ip -n ns1 link set enp0s2 name dummy0
[  100.858894] virtio_net virtio0 dummy0: renamed from enp0s2
$ ip link add dev4 type dummy
$ ip -n ns1 a
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff
3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff
$ ip netns del ns1
[  158.717795] default_device_exit: failed to move dummy0 to init_net: -17
[  158.719316] ------------[ cut here ]------------
[  158.720591] kernel BUG at net/core/dev.c:9824!
[  158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI
[  158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18
[  158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  158.727508] Workqueue: netns cleanup_net
[  158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.750638] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.752944] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  158.762758] Call Trace:
[  158.763882]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.766148]  ? devlink_nl_cmd_set_doit+0x520/0x520
[  158.768034]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.769870]  ops_exit_list.isra.0+0xa8/0x150
[  158.771544]  cleanup_net+0x446/0x8f0
[  158.772945]  ? unregister_pernet_operations+0x4a0/0x4a0
[  158.775294]  process_one_work+0xa1a/0x1740
[  158.776896]  ? pwq_dec_nr_in_flight+0x310/0x310
[  158.779143]  ? do_raw_spin_lock+0x11b/0x280
[  158.780848]  worker_thread+0x9e/0x1060
[  158.782500]  ? process_one_work+0x1740/0x1740
[  158.784454]  kthread+0x31b/0x420
[  158.786082]  ? __kthread_create_on_node+0x3f0/0x3f0
[  158.788286]  ret_from_fork+0x3a/0x50
[  158.789871] ---[ end trace defd6c657c71f936 ]---
[  158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.829899] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.834923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by checking if a device with the same name exists in init_net
and fallback to original code - dev%d to allocate name - in case it does.

This was found using syzkaller.

Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp: fix tcp_set_congestion_control() use from bpf hook 2019-07-28T06:27:16+00:00 Eric Dumazet edumazet@google.com 2019-07-19T02:28:14+00:00 6cb6681bf9be428ec87489d2dcb5a52520429edc [ Upstream commit 8d650cdedaabb33e85e9b7c517c0c71fcecc1de9 ] Neal reported incorrect use of ns_capable() from bpf hook. bpf_setsockopt(...TCP_CONGESTION...) -> tcp_set_congestion_control() -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN) -> ns_capable_common() -> current_cred() -> rcu_dereference_protected(current->cred, 1) Accessing 'current' in bpf context makes no sense, since packets are processed from softirq context. As Neal stated : The capability check in tcp_set_congestion_control() was written assuming a system call context, and then was reused from a BPF call site. The fix is to add a new parameter to tcp_set_congestion_control(), so that the ns_capable() call is only performed under the right context. Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Reported-by: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 8d650cdedaabb33e85e9b7c517c0c71fcecc1de9 ]

Neal reported incorrect use of ns_capable() from bpf hook.

bpf_setsockopt(...TCP_CONGESTION...)
  -> tcp_set_congestion_control()
   -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)
    -> ns_capable_common()
     -> current_cred()
      -> rcu_dereference_protected(current->cred, 1)

Accessing 'current' in bpf context makes no sense, since packets
are processed from softirq context.

As Neal stated : The capability check in tcp_set_congestion_control()
was written assuming a system call context, and then was reused from
a BPF call site.

The fix is to add a new parameter to tcp_set_congestion_control(),
so that the ns_capable() call is only performed under the right
context.

Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: neigh: fix multiple neigh timer scheduling 2019-07-28T06:27:13+00:00 Lorenzo Bianconi lorenzo.bianconi@redhat.com 2019-07-14T21:36:11+00:00 192a452be8b381ed71ac06a65ddc628fbdea81a6 [ Upstream commit 071c37983d99da07797294ea78e9da1a6e287144 ] Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by: Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d308906 ("neigh: Allow for user space users of the neighbour table") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 071c37983d99da07797294ea78e9da1a6e287144 ]

Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:

[   32.465295] NEIGH: BUG, double timer add, state is 8
[   32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65
[   32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   32.465313] Call Trace:
[   32.465318]  dump_stack+0x7c/0xc0
[   32.465323]  __neigh_event_send+0x20c/0x880
[   32.465326]  ? ___neigh_create+0x846/0xfb0
[   32.465329]  ? neigh_lookup+0x2a9/0x410
[   32.465332]  ? neightbl_fill_info.constprop.0+0x800/0x800
[   32.465334]  neigh_add+0x4f8/0x5e0
[   32.465337]  ? neigh_xmit+0x620/0x620
[   32.465341]  ? find_held_lock+0x85/0xa0
[   32.465345]  rtnetlink_rcv_msg+0x204/0x570
[   32.465348]  ? rtnl_dellink+0x450/0x450
[   32.465351]  ? mark_held_locks+0x90/0x90
[   32.465354]  ? match_held_lock+0x1b/0x230
[   32.465357]  netlink_rcv_skb+0xc4/0x1d0
[   32.465360]  ? rtnl_dellink+0x450/0x450
[   32.465363]  ? netlink_ack+0x420/0x420
[   32.465366]  ? netlink_deliver_tap+0x115/0x560
[   32.465369]  ? __alloc_skb+0xc9/0x2f0
[   32.465372]  netlink_unicast+0x270/0x330
[   32.465375]  ? netlink_attachskb+0x2f0/0x2f0
[   32.465378]  netlink_sendmsg+0x34f/0x5a0
[   32.465381]  ? netlink_unicast+0x330/0x330
[   32.465385]  ? move_addr_to_kernel.part.0+0x20/0x20
[   32.465388]  ? netlink_unicast+0x330/0x330
[   32.465391]  sock_sendmsg+0x91/0xa0
[   32.465394]  ___sys_sendmsg+0x407/0x480
[   32.465397]  ? copy_msghdr_from_user+0x200/0x200
[   32.465401]  ? _raw_spin_unlock_irqrestore+0x37/0x40
[   32.465404]  ? lockdep_hardirqs_on+0x17d/0x250
[   32.465407]  ? __wake_up_common_lock+0xcb/0x110
[   32.465410]  ? __wake_up_common+0x230/0x230
[   32.465413]  ? netlink_bind+0x3e1/0x490
[   32.465416]  ? netlink_setsockopt+0x540/0x540
[   32.465420]  ? __fget_light+0x9c/0xf0
[   32.465423]  ? sockfd_lookup_light+0x8c/0xb0
[   32.465426]  __sys_sendmsg+0xa5/0x110
[   32.465429]  ? __ia32_sys_shutdown+0x30/0x30
[   32.465432]  ? __fd_install+0xe1/0x2c0
[   32.465435]  ? lockdep_hardirqs_off+0xb5/0x100
[   32.465438]  ? mark_held_locks+0x24/0x90
[   32.465441]  ? do_syscall_64+0xf/0x270
[   32.465444]  do_syscall_64+0x63/0x270
[   32.465448]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set

Reported-by: Marek Majkowski <marek@cloudflare.com>
Fixes: 0c5c2d308906 ("neigh: Allow for user space users of the neighbour table")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>