linux-stable.git/net/core, branch v5.16.3

net: fix sock_timestamping_bind_phc() to release device

2022-01-27T11:03:01+00:00

commit 2a4d75bfe41232608f5596a6d1369f92ccb20817 upstream.

Don't forget to release the device in sock_timestamping_bind_phc() after
it was used to get the vclock indices.

Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Miroslav Lichvar 
Cc: Yangbo Lu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

devlink: Remove misleading internal_flags from health reporter dump

2022-01-27T11:03:01+00:00

commit e9538f8270db24d272659e15841854c7ea11119e upstream.

DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.

Fixes: e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netns: add schedule point in ops_exit_list()

2022-01-27T11:02:59+00:00

commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.

When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.

Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.

[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
    ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
    This will be fixed in a separate patch.

Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet 
Cc: Eric W. Biederman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xdp: check prog type before updating BPF link

2022-01-27T11:02:54+00:00

commit 382778edc8262b7535f00523e9eb22edba1b9816 upstream.

The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.

Fix this by adding a check and bailing out if the types don't match.

Fixes: 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: syzbot+983941aa85af6ded1fd9@syzkaller.appspotmail.com
Acked-by: Andrii Nakryiko 
Signed-off-by: Toke Høiland-Jørgensen 
Link: https://lore.kernel.org/r/20220107221115.326171-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Greg Kroah-Hartman

bpf: Do not WARN in bpf_warn_invalid_xdp_action()

2022-01-27T11:02:23+00:00

[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]

The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.

The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.

Replace the WARN_ONCE with a less intrusive pr_warn_once().

Signed-off-by: Paolo Abeni 
Signed-off-by: Daniel Borkmann 
Acked-by: Toke Høiland-Jørgensen 
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin

net-sysfs: update the queue counts in the unregistration path

2022-01-27T11:02:21+00:00

[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.

Signed-off-by: Antoine Tenart 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

bpf: Fix SO_RCVBUF/SO_SNDBUF handling in _bpf_setsockopt().

2022-01-27T11:01:55+00:00

[ Upstream commit 04c350b1ae6bdb12b84009a4d0bf5ab4e621c47b ]

The commit 4057765f2dee ("sock: consistent handling of extreme
SO_SNDBUF/SO_RCVBUF values") added a change to prevent underflow
in setsockopt() around SO_SNDBUF/SO_RCVBUF.

This patch adds the same change to _bpf_setsockopt().

Fixes: 4057765f2dee ("sock: consistent handling of extreme SO_SNDBUF/SO_RCVBUF values")
Signed-off-by: Kuniyuki Iwashima 
Signed-off-by: Alexei Starovoitov 
Link: https://lore.kernel.org/bpf/20220104013153.97906-2-kuniyu@amazon.co.jp
Signed-off-by: Sasha Levin

bpf, sockmap: Fix double bpf_prog_put on error case in map_link

2022-01-27T11:01:55+00:00

[ Upstream commit 218d747a4142f281a256687bb513a135c905867b ]

sock_map_link() is called to update a sockmap entry with a sk. But, if the
sock_map_init_proto() call fails then we return an error to the map_update
op against the sockmap. In the error path though we need to cleanup psock
and dec the refcnt on any programs associated with the map, because we
refcnt them early in the update process to ensure they are pinned for the
psock. (This avoids a race where user deletes programs while also updating
the map with new socks.)

In current code we do the prog refcnt dec explicitely by calling
bpf_prog_put() when the program was found in the map. But, after commit
'38207a5e81230' in this error path we've already done the prog to psock
assignment so the programs have a reference from the psock as well. This
then causes the psock tear down logic, invoked by sk_psock_put() in the
error path, to similarly call bpf_prog_put on the programs there.

To be explicit this logic does the prog->psock assignment:

  if (msg_*)
    psock_set_prog(...)

Then the error path under the out_progs label does a similar check and
dec with:

  if (msg_*)
     bpf_prog_put(...)

And the teardown logic sk_psock_put() does ...

  psock_set_prog(msg_*, NULL)

... triggering another bpf_prog_put(...). Then KASAN gives us this splat,
found by syzbot because we've created an inbalance between bpf_prog_inc and
bpf_prog_put calling put twice on the program.

  BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline]
  BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline] kernel/bpf/syscall.c:1829
  BUG: KASAN: vmalloc-out-of-bounds in bpf_prog_put+0x8c/0x4f0 kernel/bpf/syscall.c:1829 kernel/bpf/syscall.c:1829
  Read of size 8 at addr ffffc90000e76038 by task syz-executor020/3641

To fix clean up error path so it doesn't try to do the bpf_prog_put in the
error path once progs are assigned then it relies on the normal psock
tear down logic to do complete cleanup.

For completness we also cover the case whereh sk_psock_init_strp() fails,
but this is not expected because it indicates an incorrect socket type
and should be caught earlier.

Fixes: 38207a5e8123 ("bpf, sockmap: Attach map progs to psock early for feature probes")
Reported-by: syzbot+bb73e71cf4b8fd376a4f@syzkaller.appspotmail.com
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20220104214645.290900-1-john.fastabend@gmail.com
Signed-off-by: Sasha Levin

lwtunnel: Validate RTA_ENCAP_TYPE attribute length

2021-12-31T14:31:59+00:00

lwtunnel_valid_encap_type_attr is used to validate encap attributes
within a multipath route. Add length validation checking to the type.

lwtunnel_valid_encap_type_attr is called converting attributes to
fib{6,}_config struct which means it is used before fib_get_nhs,
ip6_route_multipath_add, and ip6_route_multipath_del - other
locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE
attribute.

Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules")

Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

net/sched: flow_dissector: Fix matching on zone id for invalid conns

2021-12-18T02:06:35+00:00

If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.

To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).

Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey 
Signed-off-by: Jakub Kicinski