linux-stable.git/net/core, branch v5.10.78 Linux kernel stable tree net: Prevent infinite while loop in skb_tx_hash() 2021-11-02T18:48:22+00:00 Michael Chan michael.chan@broadcom.com 2021-10-25T09:05:28+00:00 2b7c5eed19d3009dd6cca36853b3a22d7eff9209 commit 0c57eeecc559ca6bc18b8c4e2808bc78dbe769b0 upstream. Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0c57eeecc559ca6bc18b8c4e2808bc78dbe769b0 upstream.

Drivers call netdev_set_num_tc() and then netdev_set_tc_queue()
to set the queue count and offset for each TC.  So the queue count
and offset for the TCs may be zero for a short period after dev->num_tc
has been set.  If a TX packet is being transmitted at this time in the
code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see
nonzero dev->num_tc but zero qcount for the TC.  The while loop that
keeps looping while hash >= qcount will not end.

Fix it by checking the TC's qcount to be nonzero before using it.

Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net-sysfs: initialize uid and gid before calling net_ns_get_ownership 2021-11-02T18:48:22+00:00 Xin Long lucien.xin@gmail.com 2021-10-25T06:31:48+00:00 aed897e96b191b56109bac700bf3555113e75ea1 commit f7a1e76d0f608961cc2fc681f867a834f2746bce upstream. Currently in net_ns_get_ownership() it may not be able to set uid or gid if make_kuid or make_kgid returns an invalid value, and an uninit-value issue can be triggered by this. This patch is to fix it by initializing the uid and gid before calling net_ns_get_ownership(), as it does in kobject_get_ownership() Fixes: e6dee9f3893c ("net-sysfs: add netdev_change_owner()") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7a1e76d0f608961cc2fc681f867a834f2746bce upstream.

Currently in net_ns_get_ownership() it may not be able to set uid or gid
if make_kuid or make_kgid returns an invalid value, and an uninit-value
issue can be triggered by this.

This patch is to fix it by initializing the uid and gid before calling
net_ns_get_ownership(), as it does in kobject_get_ownership()

Fixes: e6dee9f3893c ("net-sysfs: add netdev_change_owner()")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtnetlink: fix if_nlmsg_stats_size() under estimation 2021-10-13T08:04:28+00:00 Eric Dumazet edumazet@google.com 2021-10-05T21:04:17+00:00 9a043022522e7966f87c39fd6248cbf8fc617046 [ Upstream commit d34367991933d28bd7331f67a759be9a8c474014 ] rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure. nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags); But if_nlmsg_stats_size() never considered the needed storage. This bug did not show up because alloc_skb(X) allocates skb with extra tailroom, because of added alignments. This could very well be changed in the future to have deterministic behavior. Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d34367991933d28bd7331f67a759be9a8c474014 ]

rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure.

nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags);

But if_nlmsg_stats_size() never considered the needed storage.

This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.

Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses 2021-10-06T13:55:58+00:00 Eric Dumazet edumazet@google.com 2021-09-29T22:57:50+00:00 3db53827a0e9130d9e2cbe3c3b5bca601caa4c74 [ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ] Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ]

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: Fix offloading indirect devices dependency on qdisc order creation 2021-09-18T11:40:30+00:00 Eli Cohen elic@nvidia.com 2021-08-17T17:05:18+00:00 1f5db5b8a3d6b351673f9592b8577a7e29eb7432 [ Upstream commit 74fc4f828769cca1c3be89ea92cb88feaa27ef52 ] Currently, when creating an ingress qdisc on an indirect device before the driver registered for callbacks, the driver will not have a chance to register its filter configuration callbacks. To fix that, modify the code such that it keeps track of all the ingress qdiscs that call flow_indr_dev_setup_offload(). When a driver calls flow_indr_dev_register(), go through the list of tracked ingress qdiscs and call the driver callback entry point so as to give it a chance to register its callback. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 74fc4f828769cca1c3be89ea92cb88feaa27ef52 ]

Currently, when creating an ingress qdisc on an indirect device before
the driver registered for callbacks, the driver will not have a chance
to register its filter configuration callbacks.

To fix that, modify the code such that it keeps track of all the ingress
qdiscs that call flow_indr_dev_setup_offload(). When a driver calls
flow_indr_dev_register(),  go through the list of tracked ingress qdiscs
and call the driver callback entry point so as to give it a chance to
register its callback.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
flow_dissector: Fix out-of-bounds warnings 2021-09-18T11:40:22+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2021-07-26T19:25:11+00:00 863d2eb2f726add454283dfd935c9743be71aa51 [ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ] Fix the following out-of-bounds warnings: net/core/flow_dissector.c: In function '__skb_flow_dissect': >> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds] 1104 | memcpy(&key_addrs->v6addrs, &iph->saddr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1105 | sizeof(key_addrs->v6addrs)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/linux/ipv6.h:5, from net/core/flow_dissector.c:6: include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here 133 | struct in6_addr saddr; | ^~~~~ >> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds] 1059 | memcpy(&key_addrs->v4addrs, &iph->saddr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1060 | sizeof(key_addrs->v4addrs)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/linux/ip.h:17, from net/core/flow_dissector.c:5: include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here 103 | __be32 saddr; | ^~~~~ The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). So, the compiler legitimately complains about it. As these are just a couple of members, fix this by copying each one of them in separate calls to memcpy(). This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ]

Fix the following out-of-bounds warnings:

    net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
     1104 |    memcpy(&key_addrs->v6addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1105 |           sizeof(key_addrs->v6addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ipv6.h:5,
                     from net/core/flow_dissector.c:6:
    include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
      133 |  struct in6_addr saddr;
          |                  ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
     1059 |    memcpy(&key_addrs->v4addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1060 |           sizeof(key_addrs->v4addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ip.h:17,
                     from net/core/flow_dissector.c:5:
    include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
      103 |  __be32 saddr;
          |         ^~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy().  So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
devlink: Clear whole devlink_flash_notify struct 2021-09-15T07:50:40+00:00 Leon Romanovsky leonro@nvidia.com 2021-08-14T09:57:30+00:00 2c0b826f4a7906e833a343423a8bf814d9cc8b34 [ Upstream commit ed43fbac717882165a2a4bd64f7b1f56f7467bb7 ] The { 0 } doesn't clear all fields in the struct, but tells to the compiler to set all fields to zero and doesn't touch any sub-fields if they exists. The {} is an empty initialiser that instructs to fully initialize whole struct including sub-fields, which is error-prone for future devlink_flash_notify extensions. Fixes: 6700acc5f1fe ("devlink: collect flash notify params into a struct") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ed43fbac717882165a2a4bd64f7b1f56f7467bb7 ]

The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.

The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.

Fixes: 6700acc5f1fe ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
devlink: Break parameter notification sequence to be before/after unload/load driver 2021-09-15T07:50:36+00:00 Leon Romanovsky leonro@nvidia.com 2021-07-29T17:19:24+00:00 b376ae5597fcf24968587c99b747e926b3132a93 [ Upstream commit 05a7f4a8dff19999ca8a83a35ff4782689de7bfc ] The change of namespaces during devlink reload calls to driver unload before it accesses devlink parameters. The commands below causes to use-after-free bug when trying to get flow steering mode. * ip netns add n1 * devlink dev reload pci/0000:00:09.0 netns n1 ================================================================== BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core] Read of size 4 at addr ffff888009d04308 by task devlink/275 CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x93/0xc2 print_address_description.constprop.0+0x18/0x140 ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core] ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core] kasan_report.cold+0x7c/0xd8 ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core] mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core] devlink_nl_param_fill+0x1c8/0xe80 ? __free_pages_ok+0x37a/0x8a0 ? devlink_flash_update_timeout_notify+0xd0/0xd0 ? lock_acquire+0x1a9/0x6d0 ? fs_reclaim_acquire+0xb7/0x160 ? lock_is_held_type+0x98/0x110 ? 0xffffffff81000000 ? lock_release+0x1f9/0x6c0 ? fs_reclaim_release+0xa1/0xf0 ? lock_downgrade+0x6d0/0x6d0 ? lock_is_held_type+0x98/0x110 ? lock_is_held_type+0x98/0x110 ? memset+0x20/0x40 ? __build_skb_around+0x1f8/0x2b0 devlink_param_notify+0x6d/0x180 devlink_reload+0x1c3/0x520 ? devlink_remote_reload_actions_performed+0x30/0x30 ? mutex_trylock+0x24b/0x2d0 ? devlink_nl_cmd_reload+0x62b/0x1070 devlink_nl_cmd_reload+0x66d/0x1070 ? devlink_reload+0x520/0x520 ? devlink_get_from_attrs+0x1bc/0x260 ? devlink_nl_pre_doit+0x64/0x4d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? mutex_lock_io_nested+0x1130/0x1130 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x6d0 ? devlink_reload+0x520/0x520 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11d/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x9f0/0x9f0 ? lock_release+0x1f9/0x6c0 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x730/0x730 ? _copy_from_iter_full+0x178/0x650 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6f1/0xbd0 ? netlink_unicast+0x700/0x700 ? lock_is_held_type+0x98/0x110 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? do_sys_openat2+0x10b/0x370 ? __up_read+0x1a1/0x7b0 ? do_user_addr_fault+0x219/0xdc0 ? __x64_sys_openat+0x120/0x1d0 ? __x64_sys_open+0x1a0/0x1a0 __x64_sys_sendto+0xdd/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc69d0af14a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003 RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 146: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x99/0xc0 mlx5_init_fs+0xf0/0x1c50 [mlx5_core] mlx5_load+0xd2/0x180 [mlx5_core] mlx5_init_one+0x2f6/0x450 [mlx5_core] probe_one+0x47d/0x6e0 [mlx5_core] pci_device_probe+0x2a0/0x4a0 really_probe+0x20a/0xc90 driver_probe_device+0xd8/0x380 device_driver_attach+0x1df/0x250 __driver_attach+0xff/0x240 bus_for_each_dev+0x11e/0x1a0 bus_add_driver+0x309/0x570 driver_register+0x1ee/0x380 0xffffffffa06b8062 do_one_initcall+0xd5/0x410 do_init_module+0x1c8/0x760 load_module+0x6d8b/0x9650 __do_sys_finit_module+0x118/0x1b0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 275: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x102/0x140 slab_free_freelist_hook+0x74/0x1b0 kfree+0xd7/0x2a0 mlx5_unload+0x16/0xb0 [mlx5_core] mlx5_unload_one+0xae/0x120 [mlx5_core] mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core] devlink_reload+0x141/0x520 devlink_nl_cmd_reload+0x66d/0x1070 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x27f/0x4a0 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 netlink_sendmsg+0x6f1/0xbd0 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888009d04300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffff888009d04300, ffff888009d04380) The buggy address belongs to the page: page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04 head:0000000086a64ecc order:1 compound_mapcount:0 flags: 0x4000000000010200(slab|head) raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0 raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The right solution to devlink reload is to notify about deletion of parameters, unload driver, change net namespaces, load driver and notify about addition of parameters. Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload") Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 05a7f4a8dff19999ca8a83a35ff4782689de7bfc ]

The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.

 * ip netns add n1
 * devlink dev reload pci/0000:00:09.0 netns n1

 ==================================================================
 BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
 Read of size 4 at addr ffff888009d04308 by task devlink/275

 CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x93/0xc2
  print_address_description.constprop.0+0x18/0x140
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  kasan_report.cold+0x7c/0xd8
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  devlink_nl_param_fill+0x1c8/0xe80
  ? __free_pages_ok+0x37a/0x8a0
  ? devlink_flash_update_timeout_notify+0xd0/0xd0
  ? lock_acquire+0x1a9/0x6d0
  ? fs_reclaim_acquire+0xb7/0x160
  ? lock_is_held_type+0x98/0x110
  ? 0xffffffff81000000
  ? lock_release+0x1f9/0x6c0
  ? fs_reclaim_release+0xa1/0xf0
  ? lock_downgrade+0x6d0/0x6d0
  ? lock_is_held_type+0x98/0x110
  ? lock_is_held_type+0x98/0x110
  ? memset+0x20/0x40
  ? __build_skb_around+0x1f8/0x2b0
  devlink_param_notify+0x6d/0x180
  devlink_reload+0x1c3/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_get_from_attrs+0x1bc/0x260
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? lock_is_held_type+0x98/0x110
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? do_sys_openat2+0x10b/0x370
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  ? __x64_sys_openat+0x120/0x1d0
  ? __x64_sys_open+0x1a0/0x1a0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc69d0af14a
 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
 RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
 RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
 RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

 Allocated by task 146:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x99/0xc0
  mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
  mlx5_load+0xd2/0x180 [mlx5_core]
  mlx5_init_one+0x2f6/0x450 [mlx5_core]
  probe_one+0x47d/0x6e0 [mlx5_core]
  pci_device_probe+0x2a0/0x4a0
  really_probe+0x20a/0xc90
  driver_probe_device+0xd8/0x380
  device_driver_attach+0x1df/0x250
  __driver_attach+0xff/0x240
  bus_for_each_dev+0x11e/0x1a0
  bus_add_driver+0x309/0x570
  driver_register+0x1ee/0x380
  0xffffffffa06b8062
  do_one_initcall+0xd5/0x410
  do_init_module+0x1c8/0x760
  load_module+0x6d8b/0x9650
  __do_sys_finit_module+0x118/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 Freed by task 275:
  kasan_save_stack+0x1b/0x40
  kasan_set_track+0x1c/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0x102/0x140
  slab_free_freelist_hook+0x74/0x1b0
  kfree+0xd7/0x2a0
  mlx5_unload+0x16/0xb0 [mlx5_core]
  mlx5_unload_one+0xae/0x120 [mlx5_core]
  mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
  devlink_reload+0x141/0x520
  devlink_nl_cmd_reload+0x66d/0x1070
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  genl_rcv_msg+0x27f/0x4a0
  netlink_rcv_skb+0x11d/0x340
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 The buggy address belongs to the object at ffff888009d04300
  which belongs to the cache kmalloc-128 of size 128
 The buggy address is located 8 bytes inside of
  128-byte region [ffff888009d04300, ffff888009d04380)
 The buggy address belongs to the page:
 page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
 head:0000000086a64ecc order:1 compound_mapcount:0
 flags: 0x4000000000010200(slab|head)
 raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
 raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.

Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
rtnetlink: Return correct error on changing device netns 2021-09-03T08:09:25+00:00 Andrey Ignatov rdna@fb.com 2021-08-26T00:25:40+00:00 ad0db838557587eac9a7c396b8ae9fe12a700c20 [ Upstream commit 96a6b93b69880b2c978e1b2be9cae6970b605008 ] Currently when device is moved between network namespaces using RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID, IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and target namespace already has device with same name, userspace will get EINVAL what is confusing and makes debugging harder. Fix it so that userspace gets more appropriate EEXIST instead what makes debugging much easier. Before: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: Invalid argument After: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: File exists The problem is that do_setlink() passes its `char *ifname` argument, that it gets from a caller, to __dev_change_net_namespace() as is (as `const char *pat`), but semantics of ifname and pat can be different. For example, __rtnl_newlink() does this: net/core/rtnetlink.c 3270 char ifname[IFNAMSIZ]; ... 3286 if (tb[IFLA_IFNAME]) 3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ); 3288 else 3289 ifname[0] = '\0'; ... 3364 if (dev) { ... 3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status); 3395 } , i.e. do_setlink() gets ifname pointer that is always valid no matter if user specified IFLA_IFNAME or not and then do_setlink() passes this ifname pointer as is to __dev_change_net_namespace() as pat argument. But the pat (pattern) in __dev_change_net_namespace() is used as: net/core/dev.c 11198 err = -EEXIST; 11199 if (__dev_get_by_name(net, dev->name)) { 11200 /* We get here if we can't use the current device name */ 11201 if (!pat) 11202 goto out; 11203 err = dev_get_valid_name(net, dev, pat); 11204 if (err < 0) 11205 goto out; 11206 } As the result the `goto out` path on line 11202 is neven taken and instead of returning EEXIST defined on line 11198, __dev_change_net_namespace() returns an error from dev_get_valid_name() and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier. Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 96a6b93b69880b2c978e1b2be9cae6970b605008 ]

Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270	char ifname[IFNAMSIZ];
     ...
    3286	if (tb[IFLA_IFNAME])
    3287		nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288	else
    3289		ifname[0] = '\0';
     ...
    3364	if (dev) {
     ...
    3394		return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395	}

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198	err = -EEXIST;
   11199	if (__dev_get_by_name(net, dev->name)) {
   11200		/* We get here if we can't use the current device name */
   11201		if (!pat)
   11202			goto out;
   11203		err = dev_get_valid_name(net, dev, pat);
   11204		if (err < 0)
   11205			goto out;
   11206	}

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: linkwatch: fix failure to restore device state across suspend/resume 2021-08-18T06:59:13+00:00 Willy Tarreau w@1wt.eu 2021-08-09T16:06:28+00:00 8976606ca34714223fc0ab13b611c490a37a10c7 [ Upstream commit 6922110d152e56d7569616b45a1f02876cf3eb9f ] After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed that my Ethernet port to which a bond and a VLAN interface are attached appeared to remain up after resuming from suspend with the cable unplugged (and that problem still persists with 5.10-LTS). It happens that the following happens: - the network driver (e1000e here) prepares to suspend, calls e1000e_down() which calls netif_carrier_off() to signal that the link is going down. - netif_carrier_off() adds a link_watch event to the list of events for this device - the device is completely stopped. - the machine suspends - the cable is unplugged and the machine brought to another location - the machine is resumed - the queued linkwatch events are processed for the device - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events are silently dropped - the device is resumed with its link down - the upper VLAN and bond interfaces are never notified that the link had been turned down and remain up - the only way to provoke a change is to physically connect the machine to a port and possibly unplug it. The state after resume looks like this: $ ip -br li | egrep 'bond|eth' bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> Placing an explicit call to netdev_state_change() either in the suspend or the resume code in the NIC driver worked around this but the solution is not satisfying. The issue in fact really is in link_watch that loses events while it ought not to. It happens that the test for the device being present was added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") in 4.20 to avoid an access to devices that are not present. Instead of dropping events, this patch proceeds slightly differently by postponing their handling so that they happen after the device is fully resumed. Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") Link: https://lists.openwall.net/netdev/2018/03/15/62 Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6922110d152e56d7569616b45a1f02876cf3eb9f ]

After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).

It happens that the following happens:

  - the network driver (e1000e here) prepares to suspend, calls e1000e_down()
    which calls netif_carrier_off() to signal that the link is going down.
  - netif_carrier_off() adds a link_watch event to the list of events for
    this device
  - the device is completely stopped.
  - the machine suspends
  - the cable is unplugged and the machine brought to another location
  - the machine is resumed
  - the queued linkwatch events are processed for the device
  - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
    are silently dropped
  - the device is resumed with its link down
  - the upper VLAN and bond interfaces are never notified that the link had
    been turned down and remain up
  - the only way to provoke a change is to physically connect the machine
    to a port and possibly unplug it.

The state after resume looks like this:
  $ ip -br li | egrep 'bond|eth'
  bond0            UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
  eth0             DOWN           e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
  eth0.2@eth0      UP             e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>

Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.

The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.

Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.

Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>