<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/net/core, branch v4.4.299</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>net, neigh: clear whole pneigh_entry at alloc time</title>
<updated>2021-12-14T09:03:50+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2021-12-06T16:53:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1b6cf577c63e683fde55761fde98c740fef9ed02'/>
<id>1b6cf577c63e683fde55761fde98c740fef9ed02</id>
<content type='text'>
commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream.

Commit 2c611ad97a82 ("net, neigh: Extend neigh-&gt;flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]

I think the bug is actually older, because the following intruction
only occurred if ndm-&gt;ndm_flags had NTF_PROXY set.

	pn-&gt;flags = ndm-&gt;ndm_flags;

Let's clear all pneigh_entry fields at alloc time.

[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
 pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
 pneigh_dump_table net/core/neighbour.c:2715 [inline]
 neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
 netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
 netlink_dump_start include/linux/netlink.h:254 [inline]
 rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1057
 call_write_iter include/linux/fs.h:2162 [inline]
 new_sync_write fs/read_write.c:503 [inline]
 vfs_write+0x1318/0x2030 fs/read_write.c:590
 ksys_write+0x28c/0x520 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __x64_sys_write+0xdb/0x120 fs/read_write.c:652
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 slab_alloc mm/slub.c:3259 [inline]
 __kmalloc+0xc3c/0x12d0 mm/slub.c:4437
 kmalloc include/linux/slab.h:595 [inline]
 pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
 arp_req_set_public net/ipv4/arp.c:1016 [inline]
 arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
 arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
 inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
 sock_do_ioctl net/socket.c:1118 [inline]
 sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
 __x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Roopa Prabhu &lt;roopa@nvidia.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream.

Commit 2c611ad97a82 ("net, neigh: Extend neigh-&gt;flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]

I think the bug is actually older, because the following intruction
only occurred if ndm-&gt;ndm_flags had NTF_PROXY set.

	pn-&gt;flags = ndm-&gt;ndm_flags;

Let's clear all pneigh_entry fields at alloc time.

[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
 pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
 pneigh_dump_table net/core/neighbour.c:2715 [inline]
 neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
 netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
 netlink_dump_start include/linux/netlink.h:254 [inline]
 rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1057
 call_write_iter include/linux/fs.h:2162 [inline]
 new_sync_write fs/read_write.c:503 [inline]
 vfs_write+0x1318/0x2030 fs/read_write.c:590
 ksys_write+0x28c/0x520 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __x64_sys_write+0xdb/0x120 fs/read_write.c:652
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 slab_alloc mm/slub.c:3259 [inline]
 __kmalloc+0xc3c/0x12d0 mm/slub.c:4437
 kmalloc include/linux/slab.h:595 [inline]
 pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
 arp_req_set_public net/ipv4/arp.c:1016 [inline]
 arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
 arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
 inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
 sock_do_ioctl net/socket.c:1118 [inline]
 sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
 __x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Roopa Prabhu &lt;roopa@nvidia.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: stream: don't purge sk_error_queue in sk_stream_kill_queues()</title>
<updated>2021-11-26T10:58:39+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2021-10-15T13:37:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6ba975e14f5ebb87143d737c493adf4031409a68'/>
<id>6ba975e14f5ebb87143d737c493adf4031409a68</id>
<content type='text'>
[ Upstream commit 24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]

sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.

This shows up as a warning about an rmem leak:

WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...

The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The -&gt;next pointer points back at the list head,
but not the -&gt;prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with -&gt;sk = socket in question, and -&gt;truesize = 0x300.
The contents of -&gt;cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).

Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.

Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.

Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]

sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.

This shows up as a warning about an rmem leak:

WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...

The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The -&gt;next pointer points back at the list head,
but not the -&gt;prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with -&gt;sk = socket in question, and -&gt;truesize = 0x300.
The contents of -&gt;cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).

Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.

Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.

Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>af_unix: fix races in sk_peer_pid and sk_peer_cred accesses</title>
<updated>2021-10-09T11:24:30+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2021-09-29T22:57:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=323f0968a81b082cf02ef15b447cd35e4328385e'/>
<id>323f0968a81b082cf02ef15b447cd35e4328385e</id>
<content type='text'>
commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b upstream.

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk-&gt;sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Jann Horn &lt;jannh@google.com&gt;
Cc: Eric W. Biederman &lt;ebiederm@xmission.com&gt;
Cc: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Cc: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
[backport note: 4.4 and 4.9 don't have SO_PEERGROUPS, only SO_PEERCRED]
[backport note: got rid of sk_get_peer_cred(), no users in 4.4/4.9]
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b upstream.

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk-&gt;sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Jann Horn &lt;jannh@google.com&gt;
Cc: Eric W. Biederman &lt;ebiederm@xmission.com&gt;
Cc: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Cc: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
[backport note: 4.4 and 4.9 don't have SO_PEERGROUPS, only SO_PEERCRED]
[backport note: got rid of sk_get_peer_cred(), no users in 4.4/4.9]
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: Fix zero-copy head len calculation.</title>
<updated>2021-08-08T06:37:47+00:00</updated>
<author>
<name>Pravin B Shelar</name>
<email>pshelar@ovn.org</email>
</author>
<published>2021-07-15T23:59:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1fb80d621685ed53b04f844fac81cf35bfe00294'/>
<id>1fb80d621685ed53b04f844fac81cf35bfe00294</id>
<content type='text'>
[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]

In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.

---8&lt;---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 &lt;IRQ&gt;
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
        int i, j = 0;
        int plen = 0; /* length of skb-&gt;head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from-&gt;head_frag &amp;&amp; !hlen);

Signed-off-by: Pravin B Shelar &lt;pshelar@ovn.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]

In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.

---8&lt;---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 &lt;IRQ&gt;
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
        int i, j = 0;
        int plen = 0; /* length of skb-&gt;head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from-&gt;head_frag &amp;&amp; !hlen);

Signed-off-by: Pravin B Shelar &lt;pshelar@ovn.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT</title>
<updated>2021-07-20T14:22:37+00:00</updated>
<author>
<name>Sebastian Andrzej Siewior</name>
<email>bigeasy@linutronix.de</email>
</author>
<published>2021-05-12T21:43:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5c1d4ab7b025d911ef3da83a11ad6d0ac877c4be'/>
<id>5c1d4ab7b025d911ef3da83a11ad6d0ac877c4be</id>
<content type='text'>
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Signed-off-by: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Signed-off-by: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtnetlink: Fix regression in bridge VLAN configuration</title>
<updated>2021-06-30T12:49:32+00:00</updated>
<author>
<name>Ido Schimmel</name>
<email>idosch@nvidia.com</email>
</author>
<published>2021-06-09T11:17:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d6e1d9597c22c4e97f54f1269fd53f7207266a1b'/>
<id>d6e1d9597c22c4e97f54f1269fd53f7207266a1b</id>
<content type='text'>
[ Upstream commit d2e381c4963663bca6f30c3b996fa4dbafe8fcb5 ]

Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:

 # ip link add name br1 type bridge vlan_filtering 1
 # bridge vlan add dev br1 vid 555 self pvid untagged
 RTNETLINK answers: Invalid argument

As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49b5 ("bridge: dont send
notification when skb-&gt;len == 0 in rtnl_bridge_notify").

Fix by removing the error and add a comment to avoid future bugs.

Fixes: a8db57c1d285 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Reviewed-by: Nikolay Aleksandrov &lt;nikolay@nvidia.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d2e381c4963663bca6f30c3b996fa4dbafe8fcb5 ]

Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:

 # ip link add name br1 type bridge vlan_filtering 1
 # bridge vlan add dev br1 vid 555 self pvid untagged
 RTNETLINK answers: Invalid argument

As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49b5 ("bridge: dont send
notification when skb-&gt;len == 0 in rtnl_bridge_notify").

Fix by removing the error and add a comment to avoid future bugs.

Fixes: a8db57c1d285 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Reviewed-by: Nikolay Aleksandrov &lt;nikolay@nvidia.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fib: Return the correct errno code</title>
<updated>2021-06-30T12:49:31+00:00</updated>
<author>
<name>Zheng Yongjun</name>
<email>zhengyongjun3@huawei.com</email>
</author>
<published>2021-06-02T14:06:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1b20c28d8c0261c06d647747f6f326ecb88f5aac'/>
<id>1b20c28d8c0261c06d647747f6f326ecb88f5aac</id>
<content type='text'>
[ Upstream commit 59607863c54e9eb3f69afc5257dfe71c38bb751e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun &lt;zhengyongjun3@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 59607863c54e9eb3f69afc5257dfe71c38bb751e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun &lt;zhengyongjun3@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtnetlink: Fix missing error code in rtnl_bridge_notify()</title>
<updated>2021-06-30T12:49:31+00:00</updated>
<author>
<name>Jiapeng Chong</name>
<email>jiapeng.chong@linux.alibaba.com</email>
</author>
<published>2021-06-02T10:15:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a0183e20884167857ca3325c90f4ec37e907c788'/>
<id>a0183e20884167857ca3325c90f4ec37e907c788</id>
<content type='text'>
[ Upstream commit a8db57c1d285c758adc7fb43d6e2bad2554106e1 ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code
'err'.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a8db57c1d285c758adc7fb43d6e2bad2554106e1 ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code
'err'.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>neighbour: Disregard DEAD dst in neigh_update</title>
<updated>2021-04-28T10:05:45+00:00</updated>
<author>
<name>Tong Zhu</name>
<email>zhutong@amazon.com</email>
</author>
<published>2021-03-19T18:33:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=76a798084b81abd03a84bacfb71f7566df1d1ac2'/>
<id>76a798084b81abd03a84bacfb71f7566df1d1ac2</id>
<content type='text'>
[ Upstream commit d47ec7a0a7271dda08932d6208e4ab65ab0c987c ]

After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.

I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack.  It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.

Signed-off-by: Tong Zhu &lt;zhutong@amazon.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d47ec7a0a7271dda08932d6208e4ab65ab0c987c ]

After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.

I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack.  It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.

Signed-off-by: Tong Zhu &lt;zhutong@amazon.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>can: dev: Move device back to init netns on owning netns delete</title>
<updated>2021-03-30T12:45:01+00:00</updated>
<author>
<name>Martin Willi</name>
<email>martin@strongswan.org</email>
</author>
<published>2021-03-02T12:24:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4c4af8157ea92684aa648723f64895325f3cbfbb'/>
<id>4c4af8157ea92684aa648723f64895325f3cbfbb</id>
<content type='text'>
commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream.

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[&lt;c010e700&gt;] (unwind_backtrace) from [&lt;c010a1d8&gt;] (show_stack+0x10/0x14)
[&lt;c010a1d8&gt;] (show_stack) from [&lt;c086dc10&gt;] (dump_stack+0x94/0xa8)
[&lt;c086dc10&gt;] (dump_stack) from [&lt;c086b938&gt;] (__warn+0xb8/0x114)
[&lt;c086b938&gt;] (__warn) from [&lt;c086ba10&gt;] (warn_slowpath_fmt+0x7c/0xac)
[&lt;c086ba10&gt;] (warn_slowpath_fmt) from [&lt;c0629f20&gt;] (ops_exit_list+0x38/0x60)
[&lt;c0629f20&gt;] (ops_exit_list) from [&lt;c062a5c4&gt;] (cleanup_net+0x230/0x380)
[&lt;c062a5c4&gt;] (cleanup_net) from [&lt;c0142c20&gt;] (process_one_work+0x1d8/0x438)
[&lt;c0142c20&gt;] (process_one_work) from [&lt;c0142ee4&gt;] (worker_thread+0x64/0x5a8)
[&lt;c0142ee4&gt;] (worker_thread) from [&lt;c0148a98&gt;] (kthread+0x148/0x14c)
[&lt;c0148a98&gt;] (kthread) from [&lt;c0100148&gt;] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi &lt;martin@strongswan.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream.

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[&lt;c010e700&gt;] (unwind_backtrace) from [&lt;c010a1d8&gt;] (show_stack+0x10/0x14)
[&lt;c010a1d8&gt;] (show_stack) from [&lt;c086dc10&gt;] (dump_stack+0x94/0xa8)
[&lt;c086dc10&gt;] (dump_stack) from [&lt;c086b938&gt;] (__warn+0xb8/0x114)
[&lt;c086b938&gt;] (__warn) from [&lt;c086ba10&gt;] (warn_slowpath_fmt+0x7c/0xac)
[&lt;c086ba10&gt;] (warn_slowpath_fmt) from [&lt;c0629f20&gt;] (ops_exit_list+0x38/0x60)
[&lt;c0629f20&gt;] (ops_exit_list) from [&lt;c062a5c4&gt;] (cleanup_net+0x230/0x380)
[&lt;c062a5c4&gt;] (cleanup_net) from [&lt;c0142c20&gt;] (process_one_work+0x1d8/0x438)
[&lt;c0142c20&gt;] (process_one_work) from [&lt;c0142ee4&gt;] (worker_thread+0x64/0x5a8)
[&lt;c0142ee4&gt;] (worker_thread) from [&lt;c0148a98&gt;] (kthread+0x148/0x14c)
[&lt;c0148a98&gt;] (kthread) from [&lt;c0100148&gt;] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi &lt;martin@strongswan.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
