linux-stable.git/net/core, branch v4.19.30

gro_cells: make sure device is up in gro_cells_receive()

2019-03-19T12:12:38+00:00

[ Upstream commit 2a5ff07a0eb945f291e361aa6f6becca8340ba46 ]

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc644e55 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

2019-03-13T21:02:34+00:00

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao 
Acked-by: Martin KaFai Lau 
Acked-by: Lawrence Brakmo 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

net-sysfs: Fix mem leak in netdev_register_kobject

2019-03-10T06:17:16+00:00

[ Upstream commit 895a5e96dbd6386c8e78e5b78e067dcc67b7f0ab ]

syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
  comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff  ........ .......
  backtrace:
    [<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
    [<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
    [<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
    [<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
    [<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
    [<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
    [<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
    [<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
    [<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
    [<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
    [<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
    [<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000115be9bb>] 0xffffffffffffffff

It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.

Reported-by: Hulk Robot 
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: sched: put back q.qlen into a single location

2019-03-10T06:17:16+00:00

[ Upstream commit 46b1c18f9deb326a7e18348e668e4c7ab7c7458b ]

In the series fc8b81a5981f ("Merge branch 'lockless-qdisc-series'")
John made the assumption that the data path had no need to read
the qdisc qlen (number of packets in the qdisc).

It is true when pfifo_fast is used as the root qdisc, or as direct MQ/MQPRIO
children.

But pfifo_fast can be used as leaf in class full qdiscs, and existing
logic needs to access the child qlen in an efficient way.

HTB breaks badly, since it uses cl->leaf.q->q.qlen in :
  htb_activate() -> WARN_ON()
  htb_dequeue_tree() to decide if a class can be htb_deactivated
  when it has no more packets.

HFSC, DRR, CBQ, QFQ have similar issues, and some calls to
qdisc_tree_reduce_backlog() also read q.qlen directly.

Using qdisc_qlen_sum() (which iterates over all possible cpus)
in the data path is a non starter.

It seems we have to put back qlen in a central location,
at least for stable kernels.

For all qdisc but pfifo_fast, qlen is guarded by the qdisc lock,
so the existing q.qlen{++|--} are correct.

For 'lockless' qdisc (pfifo_fast so far), we need to use atomic_{inc|dec}()
because the spinlock might be not held (for example from
pfifo_fast_enqueue() and pfifo_fast_dequeue())

This patch adds atomic_qlen (in the same location than qlen)
and renames the following helpers, since we want to express
they can be used without qdisc lock, and that qlen is no longer percpu.

- qdisc_qstats_cpu_qlen_dec -> qdisc_qstats_atomic_qlen_dec()
- qdisc_qstats_cpu_qlen_inc -> qdisc_qstats_atomic_qlen_inc()

Later (net-next) we might revert this patch by tracking all these
qlen uses and replace them by a more efficient method (not having
to access a precise qlen, but an empty/non_empty status that might
be less expensive to maintain/track).

Another possibility is to have a legacy pfifo_fast version that would
be used when used a a child qdisc, since the parent qdisc needs
a spinlock anyway. But then, future lockless qdiscs would also
have the same problem.

Fixes: 7e66016f2c65 ("net: sched: helpers to sum qlen and qlen for per cpu logic")
Signed-off-by: Eric Dumazet 
Cc: John Fastabend 
Cc: Jamal Hadi Salim 
Cc: Cong Wang 
Cc: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bpf: bpf_setsockopt: reset sock dst on SO_MARK changes

2019-02-27T09:08:57+00:00

[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]

In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used
to change sk_mark, sk_dst_reset(sk) is called. The same should be
done in bpf_setsockopt().

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Reported-by: Maciej Żenczykowski 
Signed-off-by: Peter Oskolkov 
Acked-by: Martin KaFai Lau 
Reviewed-by: Maciej Żenczykowski 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

bpf: correctly set initial window on active Fast Open sender

2019-02-27T09:08:54+00:00

[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]

The existing BPF TCP initial congestion window (TCP_BPF_IW) does not
to work on (active) Fast Open sender. This is because it changes the
(initial) window only if data_segs_out is zero -- but data_segs_out
is also incremented on SYN-data.  This patch fixes the issue by
proerly accounting for SYN-data additionally.

Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd")
Signed-off-by: Yuchung Cheng 
Reviewed-by: Neal Cardwell 
Acked-by: Lawrence Brakmo 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

net: Do not allocate page fragments that are not skb aligned

2019-02-23T08:07:26+00:00

[ Upstream commit 3bed3cc4156eedf652b4df72bdb35d4f1a2a739d ]

This patch addresses the fact that there are drivers, specifically tun,
that will call into the network page fragment allocators with buffer sizes
that are not cache aligned. Doing this could result in data alignment
and DMA performance issues as these fragment pools are also shared with the
skb allocator and any other devices that will use napi_alloc_frags or
netdev_alloc_frags.

Fixes: ffde7328a36d ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag")
Reported-by: Jann Horn 
Signed-off-by: Alexander Duyck 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: Fix for_each_netdev_feature on Big endian

2019-02-23T08:07:24+00:00

[ Upstream commit 3b89ea9c5902acccdbbdec307c85edd1bf52515e ]

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hauke Mehrtens 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: set default network namespace in init_dummy_netdev()

2019-02-06T16:30:07+00:00

[ Upstream commit 35edfdc77f683c8fd27d7732af06cf6489af60a5 ]

Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
  IP: napi_busy_loop+0xd6/0x200
  Call Trace:
    sock_poll+0x5e/0x80
    do_sys_poll+0x324/0x5a0
    SyS_poll+0x6c/0xf0
    do_syscall_64+0x6b/0x1f0
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 7db6b048da3b ("net: Commonize busy polling code to focus on napi_id instead of socket")
Signed-off-by: Josh Elsasser 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: call sk_dst_reset when set SO_DONTROUTE

2019-01-26T08:32:38+00:00

[ Upstream commit 0fbe82e628c817e292ff588cd5847fc935e025f2 ]

after set SO_DONTROUTE to 1, the IP layer should not route packets if
the dest IP address is not in link scope. But if the socket has cached
the dst_entry, such packets would be routed until the sk_dst_cache
expires. So we should clean the sk_dst_cache when a user set
SO_DONTROUTE option. Below are server/client python scripts which
could reprodue this issue:

server side code:

==========================================================================
import socket
import struct
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind(('0.0.0.0', 9000))
s.listen(1)
sock, addr = s.accept()
sock.setsockopt(socket.SOL_SOCKET, socket.SO_DONTROUTE, struct.pack('i', 1))
while True:
    sock.send(b'foo')
    time.sleep(1)
==========================================================================

client side code:
==========================================================================
import socket
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('server_address', 9000))
while True:
    data = s.recv(1024)
    print(data)
==========================================================================

Signed-off-by: yupeng 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin