linux-stable.git/net/core, branch v3.12.45

neigh: do not modify unlinked entries

2015-07-30T12:10:39+00:00

[ Upstream commit 2c51a97f76d20ebf1f50fef908b986cb051fdff9 ]

The lockless lookups can return entry that is unlinked.
Sometimes they get reference before last neigh_cleanup_and_release,
sometimes they do not need reference. Later, any
modification attempts may result in the following problems:

1. entry is not destroyed immediately because neigh_update
can start the timer for dead entry, eg. on change to NUD_REACHABLE
state. As result, entry lives for some time but is invisible
and out of control.

2. __neigh_event_send can run in parallel with neigh_destroy
while refcnt=0 but if timer is started and expired refcnt can
reach 0 for second time leading to second neigh_destroy and
possible crash.

Thanks to Eric Dumazet and Ying Xue for their work and analyze
on the __neigh_event_send change.

Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Fixes: a263b3093641 ("ipv4: Make neigh lookups directly in output packet path.")
Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Cc: Eric Dumazet 
Cc: Ying Xue 
Signed-off-by: Julian Anastasov 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net: don't wait for order-3 page allocation

2015-07-30T12:10:37+00:00

[ Upstream commit fb05e7a89f500cfc06ae277bdc911b281928995d ]

We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit 5640f7685831e0
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.

This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.

alloc_skb_with_frags is the same.

The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.

V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer

Cc: Eric Dumazet 
Cc: Chris Mason 
Cc: Debabrata Banerjee 
Signed-off-by: Shaohua Li 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net: fix crash in build_skb()

2015-04-30T11:28:09+00:00

[ Upstream commit 2ea2f62c8bda242433809c7f4e9eae1c52c40bbe ]

When I added pfmemalloc support in build_skb(), I forgot netlink
was using build_skb() with a vmalloc() area.

In this patch I introduce __build_skb() for netlink use,
and build_skb() is a wrapper handling both skb->head_frag and
skb->pfmemalloc

This means netlink no longer has to hack skb->head_frag

[ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26!
[ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1567.700067] Dumping ftrace buffer:
[ 1567.700067]    (ftrace buffer empty)
[ 1567.700067] Modules linked in:
[ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167
[ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000
[ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3))
[ 1567.700067] RSP: 0018:ffff8802467779d8  EFLAGS: 00010202
[ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c
[ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049
[ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000
[ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000
[ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000
[ 1567.700067] FS:  00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000
[ 1567.700067] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0
[ 1567.700067] Stack:
[ 1567.700067]  ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000
[ 1567.700067]  ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08
[ 1567.700067]  ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821
[ 1567.700067] Call Trace:
[ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316)
[ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329)
[ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623)
[ 1567.774369] sock_write_iter (net/socket.c:823)
[ 1567.774369] ? sock_sendmsg (net/socket.c:806)
[ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491)
[ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249)
[ 1567.774369] ? default_llseek (fs/read_write.c:487)
[ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701)
[ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4))
[ 1567.774369] vfs_write (fs/read_write.c:539)
[ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577)
[ 1567.774369] ? SyS_read (fs/read_write.c:577)
[ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63)
[ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636)
[ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42)
[ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261)

Fixes: 79930f5892e ("net: do not deplete pfmemalloc reserve")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net: do not deplete pfmemalloc reserve

2015-04-30T11:28:09+00:00

[ Upstream commit 79930f5892e134c6da1254389577fffb8bd72c66 ]

build_skb() should look at the page pfmemalloc status.
If set, this means page allocator allocated this page in the
expectation it would help to free other pages. Networking
stack can do that only if skb->pfmemalloc is also set.

Also, we must refrain using high order pages from the pfmemalloc
reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for
them. Under memory pressure, using order-0 pages is probably the best
strategy.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net: sysctl_net_core: check SNDBUF and RCVBUF for min length

2015-04-09T11:13:43+00:00

[ Upstream commit b1cb59cf2efe7971d3d72a7b963d09a512d994c9 ]

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[]  [] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [] unix_stream_sendmsg+0x2c4/0x470
 [] sock_write_iter+0x146/0x160
 [] new_sync_write+0x92/0xd0
 [] vfs_write+0xd6/0x180
 [] SyS_write+0x59/0xd0
 [] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [] skb_put+0xa1/0xb0
RSP 
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [] __alloc_skb+0x12f/0x1f0
...

Signed-off-by: Alexey Kodanev 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net: reject creation of netdev names with colons

2015-03-12T09:06:27+00:00

[ Upstream commit a4176a9391868bfa87705bcd2e3b49e9b9dd2996 ]

colons are used as a separator in netdev device lookup in dev_ioctl.c

Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME

Signed-off-by: Matthew Thode 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

gen_stats.c: Duplicate xstats buffer for later use

2015-03-12T09:06:23+00:00

[ Upstream commit 1c4cff0cf55011792125b6041bc4e9713e46240f ]

The gnet_stats_copy_app() function gets called, more often than not, with its
second argument a pointer to an automatic variable in the caller's stack.
Therefore, to avoid copying garbage afterwards when calling
gnet_stats_finish_copy(), this data is better copied to a dynamically allocated
memory that gets freed after use.

[xiyou.wangcong@gmail.com: remove a useless kfree()]

Signed-off-by: Ignacy Gawędzki 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

rtnetlink: call ->dellink on failure when ->newlink exists

2015-03-12T09:06:23+00:00

[ Upstream commit 7afb8886a05be68e376655539a064ec672de8a8e ]

Ignacy reported that when eth0 is down and add a vlan device
on top of it like:

  ip link add link eth0 name eth0.1 up type vlan id 1

We will get a refcount leak:

  unregister_netdevice: waiting for eth0.1 to become free. Usage count = 2

The problem is when rtnl_configure_link() fails in rtnl_newlink(),
we simply call unregister_device(), but for stacked device like vlan,
we almost do nothing when we unregister the upper device, more work
is done when we unregister the lower device, so call its ->dellink().

Reported-by: Ignacy Gawedzki 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY

2015-03-12T09:06:22+00:00

[ Upstream commit 364d5716a7adb91b731a35765d369602d68d2881 ]

ifla_vf_policy[] is wrong in advertising its individual member types as
NLA_BINARY since .type = NLA_BINARY in combination with .len declares the
len member as *max* attribute length [0, len].

The issue is that when do_setvfinfo() is being called to set up a VF
through ndo handler, we could set corrupted data if the attribute length
is less than the size of the related structure itself.

The intent is exactly the opposite, namely to make sure to pass at least
data of minimum size of len.

Fixes: ebc08a6f47ee ("rtnetlink: Add VF config code to rtnetlink")
Cc: Mitch Williams 
Cc: Jeff Kirsher 
Signed-off-by: Daniel Borkmann 
Acked-by: Thomas Graf 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

pktgen: fix UDP checksum computation

2015-03-12T09:06:22+00:00

[ Upstream commit 7744b5f3693cc06695cb9d6667671c790282730f ]

This patch fixes two issues in UDP checksum computation in pktgen.

First, the pseudo-header uses the source and destination IP
addresses. Currently, the ports are used for IPv4.

Second, the UDP checksum covers both header and data.  So we need to
generate the data earlier (move pktgen_finalize_skb up), and compute
the checksum for UDP header + data.

Fixes: c26bf4a51308c ("pktgen: Add UDPCSUM flag to support UDP checksums")
Signed-off-by: Sabrina Dubroca 
Acked-by: Thomas Graf 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby