linux-stable.git/net/core, branch v3.10.90

fib_rules: fix fib rule dumps across multiple skbs

2015-10-01T10:07:38+00:00

[ Upstream commit 41fc014332d91ee90c32840bf161f9685b7fbf2b ]

dump_rules returns skb length and not error.
But when family == AF_UNSPEC, the caller of dump_rules
assumes that it returns an error. Hence, when family == AF_UNSPEC,
we continue trying to dump on -EMSGSIZE errors resulting in
incorrect dump idx carried between skbs belonging to the same dump.
This results in fib rule dump always only dumping rules that fit
into the first skb.

This patch fixes dump_rules to return error so that we exit correctly
and idx is correctly maintained between skbs that are part of the
same dump.

Signed-off-by: Wilson Kok 
Signed-off-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Fix skb_set_peeked use-after-free bug

2015-10-01T10:07:36+00:00

[ Upstream commit a0a2a6602496a45ae838a96db8b8173794b5d398 ]

The commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ("net: Clone
skb before setting peeked flag") introduced a use-after-free bug
in skb_recv_datagram.  This is because skb_set_peeked may create
a new skb and free the existing one.  As it stands the caller will
continue to use the old freed skb.

This patch fixes it by making skb_set_peeked return the new skb
(or the old one if unchanged).

Fixes: 738ac1ebb96d ("net: Clone skb before setting peeked flag")
Reported-by: Brenden Blanco 
Signed-off-by: Herbert Xu 
Tested-by: Brenden Blanco 
Reviewed-by: Konstantin Khlebnikov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Fix skb csum races when peeking

2015-10-01T10:07:36+00:00

[ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ]

When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.

This is in fact bogus for the MSG_PEEK case as this is done without
any locking.  So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.

This patch fixes this by only storing the result if the skb is not
shared.  This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.

Signed-off-by: Herbert Xu 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Clone skb before setting peeked flag

2015-10-01T10:07:35+00:00

[ Upstream commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ]

Shared skbs must not be modified and this is crucial for broadcast
and/or multicast paths where we use it as an optimisation to avoid
unnecessary cloning.

The function skb_recv_datagram breaks this rule by setting peeked
without cloning the skb first.  This causes funky races which leads
to double-free.

This patch fixes this by cloning the skb and replacing the skb
in the list when setting skb->peeked.

Fixes: a59322be07c9 ("[UDP]: Only increment counter on first peek/recv")
Reported-by: Konstantin Khlebnikov 
Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: call rcu_read_lock early in process_backlog

2015-10-01T10:07:35+00:00

[ Upstream commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 ]

Incoming packet should be either in backlog queue or
in RCU read-side section. Otherwise, the final sequence of
flush_backlog() and synchronize_net() may miss packets
that can run without device reference:

CPU 1                  CPU 2
                       skb->dev: no reference
                       process_backlog:__skb_dequeue
                       process_backlog:local_irq_enable

on_each_cpu for
flush_backlog =>       IPI(hardirq): flush_backlog
                       - packet not found in backlog

                       CPU delayed ...
synchronize_net
- no ongoing RCU
read-side sections

netdev_run_todo,
rcu_barrier: no
ongoing callbacks
                       __netif_receive_skb_core:rcu_read_lock
                       - too late
free dev
                       process packet for freed dev

Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman 
Cc: Stephen Hemminger 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()

2015-10-01T10:07:35+00:00

[ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ]

pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().

Signed-off-by: Oleg Nesterov 
Reported-by: Jan Stancek 
Reported-by: Marcelo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: sysctl_net_core: check SNDBUF and RCVBUF for min length

2015-03-26T14:00:55+00:00

[ Upstream commit b1cb59cf2efe7971d3d72a7b963d09a512d994c9 ]

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[]  [] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [] unix_stream_sendmsg+0x2c4/0x470
 [] sock_write_iter+0x146/0x160
 [] new_sync_write+0x92/0xd0
 [] vfs_write+0xd6/0x180
 [] SyS_write+0x59/0xd0
 [] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [] skb_put+0xa1/0xb0
RSP 
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [] __alloc_skb+0x12f/0x1f0
...

Signed-off-by: Alexey Kodanev 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: reject creation of netdev names with colons

2015-03-18T12:22:27+00:00

[ Upstream commit a4176a9391868bfa87705bcd2e3b49e9b9dd2996 ]

colons are used as a separator in netdev device lookup in dev_ioctl.c

Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME

Signed-off-by: Matthew Thode 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

gen_stats.c: Duplicate xstats buffer for later use

2015-03-18T12:22:26+00:00

[ Upstream commit 1c4cff0cf55011792125b6041bc4e9713e46240f ]

The gnet_stats_copy_app() function gets called, more often than not, with its
second argument a pointer to an automatic variable in the caller's stack.
Therefore, to avoid copying garbage afterwards when calling
gnet_stats_finish_copy(), this data is better copied to a dynamically allocated
memory that gets freed after use.

[xiyou.wangcong@gmail.com: remove a useless kfree()]

Signed-off-by: Ignacy Gawędzki 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rtnetlink: call ->dellink on failure when ->newlink exists

2015-03-18T12:22:26+00:00

[ Upstream commit 7afb8886a05be68e376655539a064ec672de8a8e ]

Ignacy reported that when eth0 is down and add a vlan device
on top of it like:

  ip link add link eth0 name eth0.1 up type vlan id 1

We will get a refcount leak:

  unregister_netdevice: waiting for eth0.1 to become free. Usage count = 2

The problem is when rtnl_configure_link() fails in rtnl_newlink(),
we simply call unregister_device(), but for stacked device like vlan,
we almost do nothing when we unregister the upper device, more work
is done when we unregister the lower device, so call its ->dellink().

Reported-by: Ignacy Gawedzki 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman