This reverts commit 1f86123b9749 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
  SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
  it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
  and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
  sets the socket mark and does require privs.

  Additionally incoming skb->mark may already be visible if
  sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.

  Furthermore, it is easier to block the getsockopt via bpf
  (either cgroup setsockopt hook, or via syscall filters)
  then to unblock it if it requires CAP_NET_RAW/ADMIN.

On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to.  Setting it is privileged,
but retrieving it is not.  We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...

An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...

Note: This is a non-trivial revert, due to later merged commit e42c7beee71d
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.

Fixes: 1f86123b9749 ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255

The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.

          task1 (connect)              task2 (udp6_sendmsg)
        sk_setup_caps->sk_dst_set |
                                  |  sk_dst_check->
                                  |      sk_dst_set
                                  |      dst_release
        sk_setup_caps references  |
        to already freed dst_entry|

The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 217f69743681 ("net: busy-poll: allow preemption
in sk_busy_loop()"), a thread willing to use busy polling
is not hurting other threads anymore in a non preempt kernel.

I think it is safe to remove CAP_NET_ADMIN check.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230406194634.1804691-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Florian reported a regression and sent a patch with the following
changelog:

<quote>
 There is a noticeable tcp performance regression (loopback or cross-netns),
 seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.

 With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
 memory pressure happen much more often. For TCP indirect calls are
 used.

 We can't remove the if-set-return short-circuit check in
 tcp_enter_memory_pressure because there are callers other than
 sk_enter_memory_pressure.  Doing a check in the sk wrapper too
 reduces the indirect calls enough to recover some performance.

 Before,
 0.00-60.00  sec   322 GBytes  46.1 Gbits/sec                  receiver

 After:
 0.00-60.04  sec   359 GBytes  51.4 Gbits/sec                  receiver

 "iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>

It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.

[edumazet] - It seems we forgot to upstream this indirect call
             mitigation we had for years, let's do this instead.
           - Changed to INDIRECT_CALL_INET_1() to avoid bots reports.

Fixes: 4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit e48c414ee61f ("[INET]: Generalise the TCP sock ID lookup routines")
commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another
commit 463c84b97f24 ("[NET]: Introduce inet_connection_sock") removed it.
Since we could track all of them through bpf and kprobe related tools
and the feature could print loads of information which might not be
that helpful even under a little bit pressure, the whole feature which
has been inactive for many years is no longer supported.

Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/devlink/leftover.c / net/core/devlink.c:
  565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
  f05bd8ebeb69 ("devlink: move code to a dedicated directory")
  687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.

We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.

Tested by following packetdrill:
  0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
  +0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
  // SO_TXREHASH == 74, default to sysctl_txrehash == 1
  +0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
  +0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0

Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().

Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to Eric's IPv6 BIG TCP, this patch is to enable IPv4 BIG TCP.

Firstly, allow sk->sk_gso_max_size to be set to a value greater than
GSO_LEGACY_MAX_SIZE by not trimming gso_max_size in sk_trim_gso_size()
for IPv4 TCP sockets.

Then on TX path, set IP header tot_len to 0 when skb->len > IP_MAX_MTU
in __ip_local_out() to allow to send BIG TCP packets, and this implies
that skb->len is the length of a IPv4 packet; On RX path, use skb->len
as the length of the IPv4 packet when the IP header tot_len is 0 and
skb->len > IP_MAX_MTU in ip_rcv_core(). As the API iph_set_totlen() and
skb_ip_totlen() are used in __ip_local_out() and ip_rcv_core(), we only
need to update these APIs.

Also in GRO receive, add the check for ETH_P_IP/IPPROTO_TCP, and allows
the merged packet size >= GRO_LEGACY_MAX_SIZE in skb_gro_receive(). In
GRO complete, set IP header tot_len to 0 when the merged packet size
greater than IP_MAX_MTU in iph_set_totlen() so that it can be processed
on RX path.

Note that by checking skb_is_gso_tcp() in API iph_totlen(), it makes
this implementation safe to use iph->len == 0 indicates IPv4 BIG TCP
packets.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations.  For example:

<...>
  iperf-609  [002] .....  70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
  iperf-609  [002] .....  70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>

Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>