linux-stable.git/net/core/skmsg.c, branch v5.7.7

bpf: Fix running sk_skb program types with ktls

2020-06-22T07:32:53+00:00

[ Upstream commit e91de6afa81c10e9f855c5695eb9a53168d96b73 ]

KTLS uses a stream parser to collect TLS messages and send them to
the upper layer tls receive handler. This ensures the tls receiver
has a full TLS header to parse when it is run. However, when a
socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS
is enabled we end up with two stream parsers running on the same
socket.

The result is both try to run on the same socket. First the KTLS
stream parser runs and calls read_sock() which will tcp_read_sock
which in turn calls tcp_rcv_skb(). This dequeues the skb from the
sk_receive_queue. When this is done KTLS code then data_ready()
callback which because we stacked KTLS on top of the bpf stream
verdict program has been replaced with sk_psock_start_strp(). This
will in turn kick the stream parser again and eventually do the
same thing KTLS did above calling into tcp_rcv_skb() and dequeuing
a skb from the sk_receive_queue.

At this point the data stream is broke. Part of the stream was
handled by the KTLS side some other bytes may have been handled
by the BPF side. Generally this results in either missing data
or more likely a "Bad Message" complaint from the kTLS receive
handler as the BPF program steals some bytes meant to be in a
TLS header and/or the TLS header length is no longer correct.

We've already broke the idealized model where we can stack ULPs
in any order with generic callbacks on the TX side to handle this.
So in this patch we do the same thing but for RX side. We add
a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict
program is running and add a tls_sw_has_ctx_rx() helper so BPF
side can learn there is a TLS ULP on the socket.

Then on BPF side we omit calling our stream parser to avoid
breaking the data stream for the KTLS receiver. Then on the
KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS
receiver is done with the packet but before it posts the
msg to userspace. This gives us symmetry between the TX and
RX halfs and IMO makes it usable again. On the TX side we
process packets in this order BPF -> TLS -> TCP and on
the receive side in the reverse order TCP -> TLS -> BPF.

Discovered while testing OpenSSL 3.0 Alpha2.0 release.

Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend
Signed-off-by: Alexei Starovoitov
Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov
Signed-off-by: Sasha Levin

bpf: Refactor sockmap redirect code so its easy to reuse

2020-06-22T07:32:53+00:00

[ Upstream commit ca2f5f21dbbd5e3a00cd3e97f728aa2ca0b2e011 ]

We will need this block of code called from tls context shortly
lets refactor the redirect logic so its easy to use. This also
cleans up the switch stmt so we have fewer fallthrough cases.

No logic changes are intended.

Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Signed-off-by: Alexei Starovoitov 
Reviewed-by: Jakub Sitnicki 
Acked-by: Song Liu 
Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: Use bpf_prog_run_pin_on_cpu() at simple call sites.

2020-02-25T00:20:09+00:00

All of these cases are strictly of the form:

	preempt_disable();
	BPF_PROG_RUN(...);
	preempt_enable();

Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN()
with:

	migrate_disable();
	BPF_PROG_RUN(...);
	migrate_enable();

On non RT enabled kernels this maps to preempt_disable/enable() and on RT
enabled kernels this solely prevents migration, which is sufficient as
there is no requirement to prevent reentrancy to any BPF program from a
preempting task. The only requirement is that the program stays on the same
CPU.

Therefore, this is a trivially correct transformation.

The seccomp loop does not need protection over the loop. It only needs
protection per BPF filter program

[ tglx: Converted to bpf_prog_run_pin_on_cpu() ]

Signed-off-by: David S. Miller 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Alexei Starovoitov 
Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de

net, sk_msg: Clear sk_user_data pointer on clone if tagged

2020-02-21T21:29:45+00:00

sk_user_data can hold a pointer to an object that is not intended to be
shared between the parent socket and the child that gets a pointer copy on
clone. This is the case when sk_user_data points at reference-counted
object, like struct sk_psock.

One way to resolve it is to tag the pointer with a no-copy flag by
repurposing its lowest bit. Based on the bit-flag value we clear the child
sk_user_data pointer after cloning the parent socket.

The no-copy flag is stored in the pointer itself as opposed to externally,
say in socket flags, to guarantee that the pointer and the flag are copied
from parent to child socket in an atomic fashion. Parent socket state is
subject to change while copying, we don't hold any locks at that time.

This approach relies on an assumption that sk_user_data holds a pointer to
an object aligned at least 2 bytes. A manual audit of existing users of
rcu_dereference_sk_user_data helper confirms our assumption.

Also, an RCU-protected sk_user_data is not likely to hold a pointer to a
char value or a pathological case of "struct { char c; }". To be safe, warn
when the flag-bit is set when setting sk_user_data to catch any future
misuses.

It is worth considering why clearing sk_user_data unconditionally is not an
option. There exist users, DRBD, NVMe, and Xen drivers being among them,
that rely on the pointer being copied when cloning the listening socket.

Potentially we could distinguish these users by checking if the listening
socket has been created in kernel-space via sock_create_kern, and hence has
sk_kern_sock flag set. However, this is not the case for NVMe and Xen
drivers, which create sockets without marking them as belonging to the
kernel.

Signed-off-by: Jakub Sitnicki 
Signed-off-by: Daniel Borkmann 
Acked-by: John Fastabend 
Acked-by: Martin KaFai Lau 
Link: https://lore.kernel.org/bpf/20200218171023.844439-3-jakub@cloudflare.com

net, sk_msg: Don't check if sock is locked when tearing down psock

2020-01-22T19:30:20+00:00

As John Fastabend reports [0], psock state tear-down can happen on receive
path *after* unlocking the socket, if the only other psock user, that is
sockmap or sockhash, releases its psock reference before tcp_bpf_recvmsg
does so:

 tcp_bpf_recvmsg()
  psock = sk_psock_get(sk)                         <- refcnt 2
  lock_sock(sk);
  ...
                                  sock_map_free()  <- refcnt 1
  release_sock(sk)
  sk_psock_put()                                   <- refcnt 0

Remove the lockdep check for socket lock in psock tear-down that got
introduced in 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during
tear down").

[0] https://lore.kernel.org/netdev/5e25dc995d7d_74082aaee6e465b441@john-XPS-13-9370.notmuch/

Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Reported-by: syzbot+d73682fcf7fee6982fe3@syzkaller.appspotmail.com
Suggested-by: John Fastabend 
Signed-off-by: Jakub Sitnicki 
Acked-by: John Fastabend 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

bpf: Sockmap, ensure sock lock held during tear down

2020-01-15T22:26:13+00:00

The sock_map_free() and sock_hash_free() paths used to delete sockmap
and sockhash maps walk the maps and destroy psock and bpf state associated
with the socks in the map. When done the socks no longer have BPF programs
attached and will function normally. This can happen while the socks in
the map are still "live" meaning data may be sent/received during the walk.

Currently, though we don't take the sock_lock when the psock and bpf state
is removed through this path. Specifically, this means we can be writing
into the ops structure pointers such as sendmsg, sendpage, recvmsg, etc.
while they are also being called from the networking side. This is not
safe, we never used proper READ_ONCE/WRITE_ONCE semantics here if we
believed it was safe. Further its not clear to me its even a good idea
to try and do this on "live" sockets while networking side might also
be using the socket. Instead of trying to reason about using the socks
from both sides lets realize that every use case I'm aware of rarely
deletes maps, in fact kubernetes/Cilium case builds map at init and
never tears it down except on errors. So lets do the simple fix and
grab sock lock.

This patch wraps sock deletes from maps in sock lock and adds some
annotations so we catch any other cases easier.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Acked-by: Song Liu 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-3-john.fastabend@gmail.com

net: skmsg: fix TLS 1.3 crash with full sk_msg

2019-11-29T06:40:29+00:00

TLS 1.3 started using the entry at the end of the SG array
for chaining-in the single byte content type entry. This mostly
works:

[ E E E E E E . . ]
  ^           ^
   start       end

                 E < content type
               /
[ E E E E E E C . ]
  ^           ^
   start       end

(Where E denotes a populated SG entry; C denotes a chaining entry.)

If the array is full, however, the end will point to the start:

[ E E E E E E E E ]
  ^
   start
   end

And we end up overwriting the start:

    E < content type
   /
[ C E E E E E E E ]
  ^
   start
   end

The sg array is supposed to be a circular buffer with start and
end markers pointing anywhere. In case where start > end
(i.e. the circular buffer has "wrapped") there is an extra entry
reserved at the end to chain the two halves together.

[ E E E E E E . . l ]

(Where l is the reserved entry for "looping" back to front.

As suggested by John, let's reserve another entry for chaining
SG entries after the main circular buffer. Note that this entry
has to be pointed to by the end entry so its position is not fixed.

Examples of full messages:

[ E E E E E E E E . l ]
  ^               ^
   start           end

   <---------------.
[ E E . E E E E E E l ]
      ^ ^
   end   start

Now the end will always point to an unused entry, so TLS 1.3
can always use it.

Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

bpf: skmsg, fix potential psock NULL pointer dereference

2019-11-21T21:43:45+00:00

Report from Dan Carpenter,

 net/core/skmsg.c:792 sk_psock_write_space()
 error: we previously assumed 'psock' could be null (see line 790)

 net/core/skmsg.c
   789 psock = sk_psock(sk);
   790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)))
 Check for NULL
   791 schedule_work(&psock->work);
   792 write_space = psock->saved_write_space;
                     ^^^^^^^^^^^^^^^^^^^^^^^^
   793          rcu_read_unlock();
   794          write_space(sk);

Ensure psock dereference on line 792 only occurs if psock is not null.

Reported-by: Dan Carpenter 
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Signed-off-by: David S. Miller

net/tls: fix sk_msg trim on fallback to copy mode

2019-11-06T02:07:47+00:00

sk_msg_trim() tries to only update curr pointer if it falls into
the trimmed region. The logic, however, does not take into the
account pointer wrapping that sk_msg_iter_var_prev() does nor
(as John points out) the fact that msg->sg is a ring buffer.

This means that when the message was trimmed completely, the new
curr pointer would have the value of MAX_MSG_FRAGS - 1, which is
neither smaller than any other value, nor would it actually be
correct.

Special case the trimming to 0 length a little bit and rework
the comparison between curr and end to take into account wrapping.

This bug caused the TLS code to not copy all of the message, if
zero copy filled in fewer sg entries than memcopy would need.

Big thanks to Alexander Potapenko for the non-KMSAN reproducer.

v2:
 - take into account that msg->sg is a ring buffer (John).

Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1)

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com
Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com
Co-developed-by: John Fastabend 
Signed-off-by: Jakub Kicinski 
Signed-off-by: John Fastabend 
Signed-off-by: David S. Miller

net/core/skmsg: Delete an unnecessary check before the function call “consume_skb”

2019-08-24T23:24:53+00:00

The consume_skb() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring 
Acked-by: Song Liu 
Signed-off-by: David S. Miller