linux-stable.git/net/core/rtnetlink.c, branch v4.19.4

rtnetlink: Disallow FDB configuration for non-Ethernet device

2018-11-04T13:50:51+00:00

[ Upstream commit da71577545a52be3e0e9225a946e5fd79cfab015 ]

When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.

The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.

Fix this by making sure that FDB entries are only configured for
Ethernet devices.

BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x14b/0x190 lib/dump_stack.c:113
  kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
  __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
  memcmp+0x11d/0x180 lib/string.c:863
  dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
  ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
  rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
  rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
  netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
  rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
  netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
  netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
  netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
  kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
  kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
  slab_post_alloc_hook mm/slab.h:446 [inline]
  slab_alloc_node mm/slub.c:2718 [inline]
  __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:996 [inline]
  netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
  netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7

v2:
* Make error message more specific (David)

Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_")
Signed-off-by: Ido Schimmel 
Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com
Cc: Vlad Yasevich 
Cc: David Ahern 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rtnetlink: fix rtnl_fdb_dump() for ndmsg header

2018-10-05T21:21:42+00:00

Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg',
which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh').

The problem is, the function bails out early if nlmsg_parse() fails, which
does occur for iproute2 usage of 'struct ndmsg' because the payload length
is shorter than the family header alone (as 'struct ifinfomsg' is assumed).

This breaks backward compatibility with userspace -- nothing is sent back.

Some examples with iproute2 and netlink library for go [1]:

 1) $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

      This one works, as it uses 'struct ifinfomsg'.

      fdb_show() @ iproute2/bridge/fdb.c
        """
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
        ...
        if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...]
        """

 2) $ ip --family bridge neigh
    RTNETLINK answers: Invalid argument
    Dump terminated

      This one fails, as it uses 'struct ndmsg'.

      do_show_or_flush() @ iproute2/ip/ipneigh.c
        """
        .n.nlmsg_type = RTM_GETNEIGH,
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
        """

 3) $ ./neighlist
    < no output >

      This one fails, as it uses 'struct ndmsg'-based.

      neighList() @ netlink/neigh_linux.go
        """
        req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...]
        msg := Ndmsg{
        """

The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink:
bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails
if the payload length (with the _actual_ family header) is less than the
family header length alone (which is assumed, in parameter 'hdrlen').
This is true in the examples above with struct ndmsg, with size and payload
length shorter than struct ifinfomsg.

However, that commit just intends to fix something under the assumption the
family header is indeed an 'struct ifinfomsg' - by preventing access to the
payload as such (via 'ifm' pointer) if the payload length is not sufficient
to actually contain it.

The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump
interface at par with brctl"), to support iproute2's 'bridge fdb' command
(not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken.

So, in order to unbreak the 'struct ndmsg' family headers and still allow
'struct ifinfomsg' to continue to work, check for the known message sizes
used with 'struct ndmsg' in iproute2 (with zero or one attribute which is
not used in this function anyway) then do not parse the data as ifinfomsg.

Same examples with this patch applied (or revert/before the original fix):

    $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

    $ ip --family bridge neigh
    dev ens3 lladdr 33:33:00:00:00:01 PERMANENT
    dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT
    dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT

    $ ./neighlist
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}

Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068).

References:

[1] netlink library for go (test-case)
    https://github.com/vishvananda/netlink

    $ cat ~/go/src/neighlist/main.go
    package main
    import ("fmt"; "syscall"; "github.com/vishvananda/netlink")
    func main() {
        neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE)
        for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) }
    }

    $ export GOPATH=~/go
    $ go get github.com/vishvananda/netlink
    $ go build neighlist
    $ ~/go/src/neighlist/neighlist

Thanks to David Ahern for suggestions to improve this patch.

Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error")
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl")
Reported-by: Aidan Obley 
Signed-off-by: Mauricio Faria de Oliveira 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096

2018-10-02T23:06:13+00:00

We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.

Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.

A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.

Tested:

lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument

lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap

real	0m0.180s
user	0m0.000s
sys	0m0.107s

Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller

rtnetlink: Fail dump if target netnsid is invalid

2018-10-02T06:22:04+00:00

Link dumps can return results from a target namespace. If the namespace id
is invalid, then the dump request should fail if get_target_net fails
rather than continuing with a dump of the current namespace.

Fixes: 79e1ad148c844 ("rtnetlink: use netnsid to query interface")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags

2018-09-13T18:01:32+00:00

This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071

Commit 5025f7f7d506 wrongly relied on __dev_change_flags to notify users of
dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED.
Fix it by indicating flag changes explicitly to __dev_notify_flags.

Fixes: 5025f7f7d506 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link")
Reported-By: Liam mcbirnie 
Signed-off-by: Roopa Prabhu 
Signed-off-by: David S. Miller

net: rtnl: return early from rtnl_unregister_all when protocol isn't registered

2018-08-30T02:28:55+00:00

rtnl_unregister_all(PF_INET6) gets called from inet6_init in cases when
no handler has been registered for PF_INET6 yet, for example if
ip6_mr_init() fails. Abort and avoid a NULL pointer deref in that case.

Example of panic (triggered by faking a failure of
 register_pernet_subsys):

    general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
    [...]
    RIP: 0010:rtnl_unregister_all+0x17e/0x2a0
    [...]
    Call Trace:
     ? rtnetlink_net_init+0x250/0x250
     ? sock_unregister+0x103/0x160
     ? kernel_getsockopt+0x200/0x200
     inet6_init+0x197/0x20d

Fixes: e2fddf5e96df ("[IPV6]: Make af_inet6 to check ip6_route_init return value.")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

net: report invalid mtu value via netlink extack

2018-07-29T19:57:26+00:00

If an invalid MTU value is set through rtnetlink return extra error
information instead of putting message in kernel log. For other cases
where there is no visible API, keep the error report in the log.

Example:
	# ip li set dev enp12s0 mtu 10000
	Error: mtu greater than device maximum.

	# ifconfig enp12s0 mtu 10000
	SIOCSIFMTU: Invalid argument
	# dmesg | tail -1
	[ 2047.795467] enp12s0: mtu greater than device maximum

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

net: report min and max mtu network device settings

2018-07-29T19:57:26+00:00

Report the minimum and maximum MTU allowed on a device
via netlink so that it can be displayed by tools like
ip link.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

xdp: fix uninitialized 'err' variable

2018-07-18T20:32:03+00:00

Smatch caught an uninitialized variable error which GCC seems
to miss.

Fixes: a25717d2b604 ("xdp: support simultaneous driver and hw XDP attachment")
Signed-off-by: Jakub Kicinski 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-07-15T01:47:44+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various different arm32 JIT improvements in order to optimize code emission
   and make the JIT code itself more robust, from Russell.

2) Support simultaneous driver and offloaded XDP in order to allow for advanced
   use-cases where some work is offloaded to the NIC and some to the host. Also
   add ability for bpftool to load programs and maps beyond just the cgroup case,
   from Jakub.

3) Add BPF JIT support in nfp for multiplication as well as division. For the
   latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.

4) Add BTF pretty print functionality to bpftool in plain and JSON output
   format, from Okash.

5) Add build and installation to the BPF helper man page into bpftool, from Quentin.

6) Add a TCP BPF callback for listening sockets which is triggered right after
   the socket transitions to TCP_LISTEN state, from Andrey.

7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
   tree and prints all attached programs, from Roman.

8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
   packets, from Jesper.
====================

Signed-off-by: David S. Miller