linux-stable.git/net/core/ethtool.c, branch linux-5.4.y

ethtool: check device is present when getting link settings

2024-09-04T11:15:03+00:00

[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ]

A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:

     [exception RIP: qed_get_current_link+17]
  #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
  #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
 #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
 #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
 #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb

 crash> struct net_device.state ffff9a9d21336000
    state = 5,

state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).

This is the same sort of panic as observed in commit 4224cfd7fb65
("net-sysfs: add check for netdevice being present to speed_show").

There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.

Move this check into ethtool to protect all callers.

Fixes: d519e17e2d01 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge 
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats

2023-01-24T06:17:58+00:00

[ Upstream commit 9deb1e9fb88b1120a908676fa33bdf9e2eeaefce ]

It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.

Signed-off-by: Daniil Tatianin 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ethtool: clear heap allocations for ethtool function

2021-06-30T12:47:47+00:00

[ Upstream commit 80ec82e3d2c1fab42eeb730aaa7985494a963d3f ]

Several ethtool functions leave heap uncleared (potentially) by
drivers. This will leave the unused portion of heap unchanged and
might copy the full contents back to userspace.

Signed-off-by: Austin Kim 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()

2021-05-19T08:08:23+00:00

[ Upstream commit c1d9e34e11281a8ba1a1c54e4db554232a461488 ]

Fix the following out-of-bounds warning:

net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot 
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()

2019-10-26T18:20:10+00:00

memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.

Signed-off-by: zhanglin 
Signed-off-by: David S. Miller

ethtool: implement Energy Detect Powerdown support via phy-tunable

2019-09-16T20:02:45+00:00

The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.

The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.

Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.

The ADIN's datasheet mentions that TX pulses are at intervals of 1 second
default each, and they can be disabled. For the Micrel KSZ9031 PHY, the
datasheet does not mention whether they can be disabled, but mentions that
they can modified.

The way this change is structured, is similar to the PHY tunable downshift
control:
* a `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` value is exposed to cover a default
  TX interval; some PHYs could specify a certain value that makes sense
* `ETHTOOL_PHY_EDPD_NO_TX` would disable TX when EDPD is enabled
* `ETHTOOL_PHY_EDPD_DISABLE` will disable EDPD

As noted by the `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` the interval unit is 1
millisecond, which should cover a reasonable range of intervals:
 - from 1 millisecond, which does not sound like much of a power-saver
 - to ~65 seconds which is quite a lot to wait for a link to come up when
   plugging a cable

Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: Alexandru Ardelean 
Signed-off-by: David S. Miller

net: ethtool: Allow parsing ETHER_FLOW types when using flow_rule

2019-06-27T16:38:17+00:00

When parsing an ethtool_rx_flow_spec, users can specify an ethernet flow
which could contain matches based on the ethernet header, such as the
MAC address, the VLAN tag or the ethertype.

ETHER_FLOW uses the src and dst ethernet addresses, along with the
ethertype as keys. Matches based on the vlan tag are also possible, but
they are specified using the special FLOW_EXT flag.

Signed-off-by: Maxime Chevallier 
Acked-by: Pablo Neira Ayuso 
Signed-off-by: David S. Miller

net: ethtool: Allow matching on vlan DEI bit

2019-06-12T17:09:56+00:00

Using ethtool, users can specify a classification action matching on the
full vlan tag, which includes the DEI bit (also previously called CFI).

However, when converting the ethool_flow_spec to a flow_rule, we use
dissector keys to represent the matching patterns.

Since the vlan dissector key doesn't include the DEI bit, this
information was silently discarded when translating the ethtool
flow spec in to a flow_rule.

This commit adds the DEI bit into the vlan dissector key, and allows
propagating the information to the driver when parsing the ethtool flow
spec.

Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Reported-by: Michał Mirosław 
Signed-off-by: Maxime Chevallier 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T16:29:14+00:00

Pull networking fixes from David Miller:

1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.

2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.

3) Fix UDP socket lookup wrt. VRF, from Tim Beale.

4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.

5) Memory leak on unload in RDS, from Zhu Yanjun.

6) sctp_process_init leak, from Neil HOrman.

7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...

ethtool: fix potential userspace buffer overflow

2019-06-06T00:15:27+00:00

ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
and pass it to the kernel driver via ops->get_regs() for filling.

There is no restriction about what the kernel drivers can or cannot do
with the open ethtool_regs structure. They usually set regs->version
and ignore regs->len or set it to the same size as ops->get_regs_len().

But if userspace allocates a smaller buffer for the registers dump,
we would cause a userspace buffer overflow in the final copy_to_user()
call, which uses the regs.len value potentially reset by the driver.

To fix this, make this case obvious and store regs.len before calling
ops->get_regs(), to only copy as much data as requested by userspace,
up to the value returned by ops->get_regs_len().

While at it, remove the redundant check for non-null regbuf.

Signed-off-by: Vivien Didelot 
Reviewed-by: Michal Kubecek 
Signed-off-by: David S. Miller