linux-stable.git/net/core/devlink.c, branch v5.15.208

devlink: report devlink_port_type_warn source device

2024-03-01T12:21:55+00:00

[ Upstream commit a52305a81d6bb74b90b400dfa56455d37872fe4b ]

devlink_port_type_warn is scheduled for port devlink and warning
when the port type is not set. But from this warning it is not easy
found out which device (driver) has no devlink port set.

[ 3709.975552] Type was not set for devlink port.
[ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20
[ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm
[ 3709.994030]  crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse
[ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1
[ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022
[ 3710.108437] Workqueue: events devlink_port_type_warn
[ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20
[ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87
[ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282
[ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027
[ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8
[ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18
[ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600
[ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905
[ 3710.108452] FS:  0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000
[ 3710.108453] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0
[ 3710.108456] PKRU: 55555554
[ 3710.108457] Call Trace:
[ 3710.108458]  
[ 3710.108459]  process_one_work+0x1e2/0x3b0
[ 3710.108466]  ? rescuer_thread+0x390/0x390
[ 3710.108468]  worker_thread+0x50/0x3a0
[ 3710.108471]  ? rescuer_thread+0x390/0x390
[ 3710.108473]  kthread+0xdd/0x100
[ 3710.108477]  ? kthread_complete_and_exit+0x20/0x20
[ 3710.108479]  ret_from_fork+0x1f/0x30
[ 3710.108485]  
[ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]---

After patch:
[  402.473064] ice 0000:41:00.0: Type was not set for devlink port.
[  402.473064] ice 0000:41:00.1: Type was not set for devlink port.

Signed-off-by: Petr Oros 
Reviewed-by: Pavan Chebbi 
Reviewed-by: Jakub Kicinski 
Link: https://lore.kernel.org/r/20230615095447.8259-1-poros@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

devlink: remove reload failed checks in params get/set callbacks

2023-09-23T09:09:55+00:00

[ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ]

The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.

Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.

It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.

Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")

Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").

Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.

So remove the checks.

Signed-off-by: Jiri Pirko 
Reviewed-by: Ido Schimmel 
Reviewed-by: Jakub Kicinski 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

devlink: Fix use-after-free after a failed reload

2022-08-25T09:40:06+00:00

commit 6b4db2e528f650c7fb712961aac36455468d5902 upstream.

After a failed devlink reload, devlink parameters are still registered,
which means user space can set and get their values. In the case of the
mlxsw "acl_region_rehash_interval" parameter, these operations will
trigger a use-after-free [1].

Fix this by rejecting set and get operations while in the failed state.
Return the "-EOPNOTSUPP" error code which does not abort the parameters
dump, but instead causes it to skip over the problematic parameter.

Another possible fix is to perform these checks in the mlxsw parameter
callbacks, but other drivers might be affected by the same problem and I
am not aware of scenarios where these stricter checks will cause a
regression.

[1]
mlxsw_spectrum3 0000:00:10.0: Port 125: Failed to register netdev
mlxsw_spectrum3 0000:00:10.0: Failed to create ports

==================================================================
BUG: KASAN: use-after-free in mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
Read of size 4 at addr ffff8880099dcfd8 by task kworker/u4:4/777

CPU: 1 PID: 777 Comm: kworker/u4:4 Not tainted 5.19.0-rc7-custom-126601-gfe26f28c586d #1
Hardware name: QEMU MSN4700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
Call Trace:
 
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x92/0xbd lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:313 [inline]
 print_report.cold+0x5e/0x5cf mm/kasan/report.c:429
 kasan_report+0xb9/0xf0 mm/kasan/report.c:491
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
 mlxsw_sp_acl_region_rehash_intrvl_get+0x49/0x60 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c:1106
 mlxsw_sp_params_acl_region_rehash_intrvl_get+0x33/0x80 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3854
 devlink_param_get net/core/devlink.c:4981 [inline]
 devlink_nl_param_fill+0x238/0x12d0 net/core/devlink.c:5089
 devlink_param_notify+0xe5/0x230 net/core/devlink.c:5168
 devlink_ns_change_notify net/core/devlink.c:4417 [inline]
 devlink_ns_change_notify net/core/devlink.c:4396 [inline]
 devlink_reload+0x15f/0x700 net/core/devlink.c:4507
 devlink_pernet_pre_exit+0x112/0x1d0 net/core/devlink.c:12272
 ops_pre_exit_list net/core/net_namespace.c:152 [inline]
 cleanup_net+0x494/0xc00 net/core/net_namespace.c:582
 process_one_work+0x9fc/0x1710 kernel/workqueue.c:2289
 worker_thread+0x675/0x10b0 kernel/workqueue.c:2436
 kthread+0x30c/0x3d0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 

The buggy address belongs to the physical page:
page:ffffea0000267700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99dc
flags: 0x100000000000000(node=0|zone=1)
raw: 0100000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880099dce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8880099dcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8880099dcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                                    ^
 ffff8880099dd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8880099dd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param")
Signed-off-by: Ido Schimmel 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

devlink: Remove misleading internal_flags from health reporter dump

2022-01-27T10:05:39+00:00

commit e9538f8270db24d272659e15841854c7ea11119e upstream.

DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.

Fixes: e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

devlink: fix netns refcount leak in devlink_nl_cmd_reload()

2021-12-14T09:57:10+00:00

commit 4dbb0dad8e63fcd0b5a117c2861d2abe7ff5f186 upstream.

While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()

Some error paths forgot to release a refcount on a netns.

To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload().

Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command")
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Eric Dumazet 
Cc: Moshe Shemesh 
Cc: Jacob Keller 
Cc: Jiri Pirko 
Reviewed-by: Leon Romanovsky 
Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

devlink: Clear whole devlink_flash_notify struct

2021-08-14T12:59:10+00:00

The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.

The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.

Fixes: 6700acc5f1fe ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller

devlink: Use xarray to store devlink instances

2021-08-14T12:59:10+00:00

We can use xarray instead of linearly organized linked lists for the
devlink instances. This will let us revise the locking scheme in favour
of internal xarray locking that protects database.

Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller

devlink: Count struct devlink consumers

2021-08-14T12:59:10+00:00

The struct devlink itself is protected by internal lock and doesn't
need global lock during operation. That global lock is used to protect
addition/removal new devlink instances from the global list in use by
all devlink consumers in the system.

The future conversion of linked list to be xarray will allow us to
actually delete that lock, but first we need to count all struct devlink
users.

The reference counting provides us a way to ensure that no new user
space commands success to grab devlink instance which is going to be
destroyed makes it is safe to access it without lock.

Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller

devlink: Remove check of always valid devlink pointer

2021-08-14T12:59:10+00:00

Devlink objects are accessible only after they were registered and
have valid devlink_*->devlink pointers.

Remove that check and simplify respective fill functions as an outcome
of such change.

Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller

devlink: Simplify devlink_pernet_pre_exit call

2021-08-14T12:59:10+00:00

The devlink_pernet_pre_exit() will be called if net namespace exits.

That routine is relevant for devlink instances that were assigned to
that namespaces first. This assignment is possible only with the following
command: "devlink reload DEV netns ...", which already checks reload support.

Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller