linux-stable.git/net/core/devlink.c, branch v4.18.2

devlink: Add extack to reload and port_{un, }split operations

2018-06-05T16:32:37+00:00

Add extack argument to reload, port_split and port_unsplit operations.

Signed-off-by: David Ahern 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: remove unnecessary genlmsg_cancel() calls

2018-05-29T13:53:38+00:00

the message be freed immediately, no need to trim it
back to the previous size.

Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls")

Signed-off-by: YueHaibing 
Signed-off-by: David S. Miller

devlink: don't take instance lock around eswitch mode set

2018-05-23T18:26:19+00:00

Changing switch mode may want to register and unregister devlink
ports.  Therefore similarly to DEVLINK_CMD_PORT_SPLIT/UNSPLIT it
should not take the instance lock.  Drivers don't depend on existing
locking since it's a very recent addition.

Signed-off-by: Jakub Kicinski 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

devlink: introduce a helper to generate physical port names

2018-05-19T20:30:39+00:00

Each driver implements physical port name generation by itself. However
as devlink has all needed info, it can easily do the job for all its
users. So implement this helper in devlink.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

devlink: extend attrs_set for setting port flavours

2018-05-19T20:30:39+00:00

Devlink ports can have specific flavour according to the purpose of use.
This patch extend attrs_set so the driver can say which flavour port
has. Initial flavours are:
physical, cpu, dsa
User can query this to see right away what is the purpose of each port.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

devlink: introduce devlink_port_attrs_set

2018-05-19T20:30:39+00:00

Change existing setter for split port information into more generic
attrs setter. Alongside with that, allow to set port number and subport
number for split ports.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

devlink: convert occ_get op to separate registration

2018-04-08T16:45:57+00:00

This resolves race during initialization where the resources with
ops are registered before driver and the structures used by occ_get
op is initialized. So keep occ_get callbacks registered only when
all structs are initialized.

The example flows, as it is in mlxsw:
1) driver load/asic probe:
   mlxsw_core
      -> mlxsw_sp_resources_register
        -> mlxsw_sp_kvdl_resources_register
          -> devlink_resource_register IDX
   mlxsw_spectrum
      -> mlxsw_sp_kvdl_init
        -> mlxsw_sp_kvdl_parts_init
          -> mlxsw_sp_kvdl_part_init
            -> devlink_resource_size_get IDX (to get the current setup
                                              size from devlink)
        -> devlink_resource_occ_get_register IDX (register current
                                                  occupancy getter)
2) reload triggered by devlink command:
  -> mlxsw_devlink_core_bus_device_reload
    -> mlxsw_sp_fini
      -> mlxsw_sp_kvdl_fini
	-> devlink_resource_occ_get_unregister IDX
    (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get
     which is using mlxsw_sp would cause use-after free)
    -> mlxsw_sp_init
      -> mlxsw_sp_kvdl_init
        -> mlxsw_sp_kvdl_parts_init
          -> mlxsw_sp_kvdl_part_init
            -> devlink_resource_size_get IDX (to get the current setup
                                              size from devlink)
        -> devlink_resource_occ_get_register IDX (register current
                                                  occupancy getter)

Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-03-23T15:31:58+00:00

Fun set of conflict resolutions here...

For the mac80211 stuff, these were fortunately just parallel
adds.  Trivially resolved.

In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.

In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.

The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.

The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:

====================

    Due to bug fixes found by the syzkaller bot and taken into the for-rc
    branch after development for the 4.17 merge window had already started
    being taken into the for-next branch, there were fairly non-trivial
    merge issues that would need to be resolved between the for-rc branch
    and the for-next branch.  This merge resolves those conflicts and
    provides a unified base upon which ongoing development for 4.17 can
    be based.

    Conflicts:
            drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
            (IB/mlx5: Fix cleanup order on unload) added to for-rc and
            commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
            add as part of the devel cycle both needed to modify the
            init/de-init functions used by mlx5.  To support the new
            representors, the new functions added by the cleanup patch
            needed to be made non-static, and the init/de-init list
            added by the representors patch needed to be modified to
            match the init/de-init list changes made by the cleanup
            patch.
    Updates:
            drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
            prototypes added by representors patch to reflect new function
            names as changed by cleanup patch
            drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
            stage list to match new order from cleanup patch
====================

Signed-off-by: David S. Miller

devlink: Remove top_hierarchy arg to devlink_resource_register

2018-03-22T17:08:41+00:00

top_hierarchy arg can be determined by comparing parent_resource_id to
DEVLINK_RESOURCE_ID_PARENT_TOP so it does not need to be a separate
argument.

Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

devlink: Remove redundant free on error path

2018-03-20T14:59:29+00:00

The current code performs unneeded free. Remove the redundant skb freeing
during the error path.

Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Arkadi Sharshevsky 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller