linux-stable.git/net/core/dev.c, branch v6.12

net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension

2024-10-31T01:21:30+00:00

As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.

This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.

But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).

The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.

Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.

Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: Benoît Monin 
Reviewed-by: Willem de Bruijn 
Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski

net: add more sanity checks to qdisc_pkt_len_init()

2024-10-01T09:47:05+00:00

One path takes care of SKB_GSO_DODGY, assuming
skb->len is bigger than hdr_len.

virtio_net_hdr_to_skb() does not fully dissect TCP headers,
it only make sure it is at least 20 bytes.

It is possible for an user to provide a malicious 'GSO' packet,
total length of 80 bytes.

- 20 bytes of IPv4 header
- 60 bytes TCP header
- a small gso_size like 8

virtio_net_hdr_to_skb() would declare this packet as a normal
GSO packet, because it would see 40 bytes of payload,
bigger than gso_size.

We need to make detect this case to not underflow
qdisc_skb_cb(skb)->pkt_len.

Fixes: 1def9238d4aa ("net_sched: more precise pkt_len computation")
Signed-off-by: Eric Dumazet 
Reviewed-by: Willem de Bruijn 
Reviewed-by: David Ahern 
Signed-off-by: Paolo Abeni

net: avoid potential underflow in qdisc_pkt_len_init() with UFO

2024-10-01T09:47:05+00:00

After commit 7c6d2ecbda83 ("net: be more gentle about silly gso
requests coming from user") virtio_net_hdr_to_skb() had sanity check
to detect malicious attempts from user space to cook a bad GSO packet.

Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count
transport header in UFO") while fixing one issue, allowed user space
to cook a GSO packet with the following characteristic :

IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28.

When this packet arrives in qdisc_pkt_len_init(), we end up
with hdr_len = 28 (IPv4 header + UDP header), matching skb->len

Then the following sets gso_segs to 0 :

gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
                        shinfo->gso_size);

Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/

qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len;

This leads to the following crash in fq_codel [1]

qdisc_pkt_len_init() is best effort, we only want an estimation
of the bytes sent on the wire, not crashing the kernel.

This patch is fixing this particular issue, a following one
adds more sanity checks for another potential bug.

[1]
[   70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   70.724561] #PF: supervisor read access in kernel mode
[   70.724561] #PF: error_code(0x0000) - not-present page
[   70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0
[   70.724561] Oops: Oops: 0000 [#1] SMP NOPTI
[   70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991
[   70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[   70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel
[ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49
All code
========
   0:	24 08                	and    $0x8,%al
   2:	49 c1 e1 06          	shl    $0x6,%r9
   6:	44 89 7c 24 18       	mov    %r15d,0x18(%rsp)
   b:	45 31 ed             	xor    %r13d,%r13d
   e:	45 31 c0             	xor    %r8d,%r8d
  11:	31 ff                	xor    %edi,%edi
  13:	89 44 24 14          	mov    %eax,0x14(%rsp)
  17:	4c 03 8b 90 01 00 00 	add    0x190(%rbx),%r9
  1e:	eb 04                	jmp    0x24
  20:	39 ca                	cmp    %ecx,%edx
  22:	73 37                	jae    0x5b
  24:	4d 8b 39             	mov    (%r9),%r15
  27:	83 c7 01             	add    $0x1,%edi
  2a:*	49 8b 17             	mov    (%r15),%rdx		<-- trapping instruction
  2d:	49 89 11             	mov    %rdx,(%r9)
  30:	41 8b 57 28          	mov    0x28(%r15),%edx
  34:	45 8b 5f 34          	mov    0x34(%r15),%r11d
  38:	49 c7 07 00 00 00 00 	movq   $0x0,(%r15)
  3f:	49                   	rex.WB

Code starting with the faulting instruction
===========================================
   0:	49 8b 17             	mov    (%r15),%rdx
   3:	49 89 11             	mov    %rdx,(%r9)
   6:	41 8b 57 28          	mov    0x28(%r15),%edx
   a:	45 8b 5f 34          	mov    0x34(%r15),%r11d
   e:	49 c7 07 00 00 00 00 	movq   $0x0,(%r15)
  15:	49                   	rex.WB
[   70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202
[   70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000
[   70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
[   70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000
[   70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58
[   70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000
[   70.724561] FS:  000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000
[   70.724561] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0
[   70.724561] Call Trace:
[   70.724561]  
[   70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[   70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715)
[   70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539)
[   70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
[   70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel
[   70.724561] dev_qdisc_enqueue (net/core/dev.c:3784)
[   70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2))
[   70.724561] ? irqentry_enter (kernel/entry/common.c:237)
[   70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2))
[   70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4))
[   70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702)
[   70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1))
[   70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1))
[   70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4))
[   70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1))
[   70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1))
[   70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355)
[   70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1))
[   70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
[   70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[   70.724561] RIP: 0033:0x41ae09

Fixes: cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Cc: Jonathan Davies 
Reviewed-by: Willem de Bruijn 
Reviewed-by: Jonathan Davies 
Reviewed-by: David Ahern 
Signed-off-by: Paolo Abeni

net: Fix gso_features_check to check for both dev->gso_{ipv4_,}max_size

2024-10-01T08:48:52+00:00

Commit 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.

This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.

Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.

Fixes: 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann 
Cc: Eric Dumazet 
Cc: Paolo Abeni 
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni

Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-09-17T05:09:17+00:00

Pull irq updates from Thomas Gleixner:
 "Core:

   - Remove a global lock in the affinity setting code

     The lock protects a cpumask for intermediate results and the lock
     causes a bottleneck on simultaneous start of multiple virtual
     machines. Replace the lock and the static cpumask with a per CPU
     cpumask which is nicely serialized by raw spinlock held when
     executing this code.

   - Provide support for giving a suffix to interrupt domain names.

     That's required to support devices with subfunctions so that the
     domain names are distinct even if they originate from the same
     device node.

   - The usual set of cleanups and enhancements all over the place

  Drivers:

   - Support for longarch AVEC interrupt chip

   - Refurbishment of the Armada driver so it can be extended for new
     variants.

   - The usual set of cleanups and enhancements all over the place"

* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  genirq: Use cpumask_intersects()
  genirq/cpuhotplug: Use cpumask_intersects()
  irqchip/apple-aic: Only access system registers on SoCs which provide them
  irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
  irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
  dt-bindings: apple,aic: Document A7-A11 compatibles
  irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
  genirq/msi: Use kmemdup_array() instead of kmemdup()
  genirq/proc: Change the return value for set affinity permission error
  genirq/proc: Use irq_move_pending() in show_irq_affinity()
  genirq/proc: Correctly set file permissions for affinity control files
  genirq: Get rid of global lock in irq_do_set_affinity()
  genirq: Fix typo in struct comment
  irqchip/loongarch-avec: Add AVEC irqchip support
  irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
  irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
  LoongArch: Architectural preparation for AVEC irqchip
  LoongArch: Move irqchip function prototypes to irq-loongson.h
  irqchip/loongson-pch-msi: Switch to MSI parent domains
  softirq: Remove unused 'action' parameter from action callback
  ...

net: add support for skbs with unreadable frags

2024-09-12T03:44:31+00:00

For device memory TCP, we expect the skb headers to be available in host
memory for access, and we expect the skb frags to be in device memory
and unaccessible to the host. We expect there to be no mixing and
matching of device memory frags (unaccessible) with host memory frags
(accessible) in the same skb.

Add a skb->devmem flag which indicates whether the frags in this skb
are device memory frags or not.

__skb_fill_netmem_desc() now checks frags added to skbs for net_iov,
and marks the skb as skb->devmem accordingly.

Add checks through the network stack to avoid accessing the frags of
devmem skbs and avoid coalescing devmem skbs with non devmem skbs.

Signed-off-by: Willem de Bruijn 
Signed-off-by: Kaiyuan Zhang 
Signed-off-by: Mina Almasry 
Reviewed-by: Eric Dumazet 
Reviewed-by: Jakub Kicinski 
Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski

net: support non paged skb frags

2024-09-12T03:44:31+00:00

Make skb_frag_page() fail in the case where the frag is not backed
by a page, and fix its relevant callers to handle this case.

Signed-off-by: Mina Almasry 
Reviewed-by: Eric Dumazet 
Reviewed-by: Jakub Kicinski 
Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski

netdev: support binding dma-buf to netdevice

2024-09-12T03:44:31+00:00

Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.

The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.

We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.

The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.

The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.

The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.

Signed-off-by: Willem de Bruijn 
Signed-off-by: Kaiyuan Zhang 
Signed-off-by: Mina Almasry 
Reviewed-by: Pavel Begunkov  # excluding netlink
Acked-by: Daniel Vetter 
Reviewed-by: Jakub Kicinski 
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski

net: remove dev_pick_tx_cpu_id()

2024-09-09T23:53:38+00:00

dev_pick_tx_cpu_id() has been introduced with two users by
commit a4ea8a3dacc3 ("net: Add generic ndo_select_queue functions").
The use in AF_PACKET has been removed in 2019 by
commit b71b5837f871 ("packet: rework packet_pick_tx_queue() to use common code selection")
The other user was a Netlogic XLP driver, removed in 2021 by
commit 47ac6f567c28 ("staging: Remove Netlogic XLP network driver").

It's relatively unlikely that any modern driver will need an
.ndo_select_queue implementation which picks purely based on CPU ID
and skips XPS, delete dev_pick_tx_cpu_id()

Found by code inspection.

Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20240906161059.715546-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski

net/core: make use of the helper macro LIST_HEAD()

2024-09-07T01:10:22+00:00

list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.

Signed-off-by: Hongbo Li 
Link: https://patch.msgid.link/20240904093243.3345012-6-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski