linux-stable.git/net/core/dev.c, branch v4.19.201

gro: ensure frag0 meets IP header alignment

2021-08-04T10:23:44+00:00

commit 38ec4944b593fd90c5ef42aaaa53e66ae5769d04 upstream.

After commit 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.

After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()

The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.

This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.

Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.

Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.

Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet 
Reported-by: Guenter Roeck 
Cc: Xuan Zhuo 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Acked-by: Michael S. Tsirkin 
Tested-by: Guenter Roeck 
Signed-off-by: David S. Miller 
Signed-off-by: Matthieu Baerts 
Signed-off-by: Greg Kroah-Hartman

net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

2021-07-20T14:15:59+00:00

[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli 
Signed-off-by: Sebastian Andrzej Siewior 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Juri Lelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

can: dev: Move device back to init netns on owning netns delete

2021-03-30T12:37:03+00:00

commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream.

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x94/0xa8)
[] (dump_stack) from [] (__warn+0xb8/0x114)
[] (__warn) from [] (warn_slowpath_fmt+0x7c/0xac)
[] (warn_slowpath_fmt) from [] (ops_exit_list+0x38/0x60)
[] (ops_exit_list) from [] (cleanup_net+0x230/0x380)
[] (cleanup_net) from [] (process_one_work+0x1d8/0x438)
[] (process_one_work) from [] (worker_thread+0x64/0x5a8)
[] (worker_thread) from [] (kthread+0x148/0x14c)
[] (kthread) from [] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled

2021-01-27T10:05:44+00:00

commit a3eb4e9d4c9218476d05c52dfd2be3d6fdce6b91 upstream.

With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564c8ee ("net: Add TLS RX offload feature")
Signed-off-by: Tariq Toukan 
Reviewed-by: Boris Pismenny 
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: disable netpoll on fresh napis

2020-09-12T11:40:23+00:00

[ Upstream commit 96e97bc07e90f175a8980a22827faf702ca4cb30 ]

napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.

This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().

To ensure memory ordering is correct we need to use RCU accessors.

Reported-by: Rob Sherwood 
Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

dev: Defer free of skbs in flush_backlog

2020-07-31T16:37:47+00:00

[ Upstream commit 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 ]

IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.

Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: increment xmit_recursion level in dev_direct_xmit()

2020-07-01T03:17:04+00:00

[ Upstream commit 0ad6f6e767ec2f613418cbc7ebe5ec4c35af540c ]

Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses
from recursive dereference inside the stack") Hannes added code
so that IPv6 stack would not trust skb->sk for typical cases
where packet goes through 'standard' xmit path (__dev_queue_xmit())

Alas af_packet had a dev_direct_xmit() path that was not
dealing yet with xmit_recursion level.

Also change sk_mc_loop() to dump a stack once only.

Without this patch, syzbot was able to trigger :

[1]
[  153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70
[  153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core
[  153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273
[  153.567387] RIP: 0010:sk_mc_loop+0x51/0x70
[  153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0
[  153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212
[  153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007
[  153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000
[  153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008
[  153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000
[  153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00
[  153.567390] FS:  00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000
[  153.567390] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0
[  153.567391] Call Trace:
[  153.567391]  ip6_finish_output2+0x34e/0x550
[  153.567391]  __ip6_finish_output+0xe7/0x110
[  153.567391]  ip6_finish_output+0x2d/0xb0
[  153.567392]  ip6_output+0x77/0x120
[  153.567392]  ? __ip6_finish_output+0x110/0x110
[  153.567392]  ip6_local_out+0x3d/0x50
[  153.567392]  ipvlan_queue_xmit+0x56c/0x5e0
[  153.567393]  ? ksize+0x19/0x30
[  153.567393]  ipvlan_start_xmit+0x18/0x50
[  153.567393]  dev_direct_xmit+0xf3/0x1c0
[  153.567393]  packet_direct_xmit+0x69/0xa0
[  153.567394]  packet_sendmsg+0xbf0/0x19b0
[  153.567394]  ? plist_del+0x62/0xb0
[  153.567394]  sock_sendmsg+0x65/0x70
[  153.567394]  sock_write_iter+0x93/0xf0
[  153.567394]  new_sync_write+0x18e/0x1a0
[  153.567395]  __vfs_write+0x29/0x40
[  153.567395]  vfs_write+0xb9/0x1b0
[  153.567395]  ksys_write+0xb1/0xe0
[  153.567395]  __x64_sys_write+0x1a/0x20
[  153.567395]  do_syscall_64+0x43/0x70
[  153.567396]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  153.567396] RIP: 0033:0x453549
[  153.567396] Code: Bad RIP value.
[  153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549
[  153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003
[  153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000
[  153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc
[  153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700
[  153.567399] ---[ end trace c1d5ae2b1059ec62 ]---

f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: place xmit recursion in softnet data

2020-07-01T03:17:04+00:00

commit 97cdcf37b57e3f204be3000b9eab9686f38b4356 upstream.

This fills a hole in softnet data, so no change in structure size.

Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.

Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix memleak in register_netdevice()

2020-07-01T03:17:03+00:00

[ Upstream commit 814152a89ed52c722ab92e9fbabcac3cb8a39245 ]

I got a memleak report when doing some fuzz test:

unreferenced object 0xffff888112584000 (size 13599):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 32 bytes):
    74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00  tap0............
    00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0
    [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0
    [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0
    [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888111845cc0 (size 8):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 8 bytes):
    74 61 70 30 00 88 ff ff                          tap0....
  backtrace:
    [<000000004c159777>] kstrdup+0x35/0x70
    [<00000000d8b496ad>] kstrdup_const+0x3d/0x50
    [<00000000494e884a>] kvasprintf_const+0xf1/0x180
    [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140
    [<000000008fbdfc7b>] dev_set_name+0xab/0xe0
    [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390
    [<00000000602704fe>] register_netdevice+0xb61/0x1250
    [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff88811886d800 (size 512):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff  .........f=.....
  backtrace:
    [<0000000050315800>] device_add+0x61e/0x1950
    [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390
    [<00000000602704fe>] register_netdevice+0xb61/0x1250
    [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.

Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: core: device_rename: Use rwsem instead of a seqcount

2020-06-25T13:33:10+00:00

[ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ]

Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.

Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.

To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.

The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.

Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.

>From all the above, replace the seqcount with a rwsem.

Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount)
Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
Cc: 
Reported-by: kbuild test robot  [ v1 missing up_read() on error exit ]
Reported-by: Dan Carpenter  [ v1 missing up_read() on error exit ]
Signed-off-by: Ahmed S. Darwish 
Reviewed-by: Sebastian Andrzej Siewior 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin