linux-stable.git/net/core/dev.c, branch v4.1.41

tunnels: Don't apply GRO to multiple layers of encapsulation.

2017-01-13T17:21:58+00:00

[ Upstream commit fac8e0f579695a3ecbc4d3cac369139d7f819971 ]

When drivers express support for TSO of encapsulated packets, they
only mean that they can do it for one layer of encapsulation.
Supporting additional levels would mean updating, at a minimum,
more IP length fields and they are unaware of this.

No encapsulation device expresses support for handling offloaded
encapsulated packets, so we won't generate these types of frames
in the transmit path. However, GRO doesn't have a check for
multiple levels of encapsulation and will attempt to build them.

UDP tunnel GRO actually does prevent this situation but it only
handles multiple UDP tunnels stacked on top of each other. This
generalizes that solution to prevent any kind of tunnel stacking
that would cause problems.

Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: Jesse Gross 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: add recursion limit to GRO

2016-12-23T13:56:36+00:00

[ Debian: net-add-recursion-limit-to-gro.patch ]

Currently, GRO can do unlimited recursion through the gro_receive
handlers.  This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem.  Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.

This patch adds a recursion counter to the GRO layer to prevent stack
overflow.  When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally.

Thanks to Vladimír Beneš  for the initial bug report.

Fixes: CVE-2016-7039
Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.")
Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Jiri Benc 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: Philipp Hahn 
Signed-off-by: Sasha Levin

net: preserve IP control block during GSO segmentation

2016-01-31T19:23:36+00:00

[ Upstream commit 9207f9d45b0ad071baa128e846d7e7ed85016df3 ]

Skb_gso_segment() uses skb control block during segmentation.
This patch adds 32-bytes room for previous control block which
will be copied into all resulting segments.

This patch fixes kernel crash during fragmenting forwarded packets.
Fragmentation requires valid IP CB in skb for clearing ip options.
Also patch removes custom save/restore in ovs code, now it's redundant.

Signed-off-by: Konstantin Khlebnikov 
Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: call rcu_read_lock early in process_backlog

2015-09-29T17:26:21+00:00

[ Upstream commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 ]

Incoming packet should be either in backlog queue or
in RCU read-side section. Otherwise, the final sequence of
flush_backlog() and synchronize_net() may miss packets
that can run without device reference:

CPU 1                  CPU 2
                       skb->dev: no reference
                       process_backlog:__skb_dequeue
                       process_backlog:local_irq_enable

on_each_cpu for
flush_backlog =>       IPI(hardirq): flush_backlog
                       - packet not found in backlog

                       CPU delayed ...
synchronize_net
- no ongoing RCU
read-side sections

netdev_run_todo,
rcu_barrier: no
ongoing callbacks
                       __netif_receive_skb_core:rcu_read_lock
                       - too late
free dev
                       process packet for freed dev

Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman 
Cc: Stephen Hemminger 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: do not process device backlog during unregistration

2015-09-29T17:26:21+00:00

[ Upstream commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 ]

commit 381c759d9916 ("ipv4: Avoid crashing in ip_error")
fixes a problem where processed packet comes from device
with destroyed inetdev (dev->ip_ptr). This is not expected
because inetdev_destroy is called in NETDEV_UNREGISTER
phase and packets should not be processed after
dev_close_many() and synchronize_net(). Above fix is still
required because inetdev_destroy can be called for other
reasons. But it shows the real problem: backlog can keep
packets for long time and they do not hold reference to
device. Such packets are then delivered to upper levels
at the same time when device is unregistered.
Calling flush_backlog after NETDEV_UNREGISTER_FINAL still
accounts all packets from backlog but before that some packets
continue to be delivered to upper levels long after the
synchronize_net call which is supposed to wait the last
ones. Also, as Eric pointed out, processed packets, mostly
from other devices, can continue to add new packets to backlog.

Fix the problem by moving flush_backlog early, after the
device driver is stopped and before the synchronize_net() call.
Then use netif_running check to make sure we do not add more
packets to backlog. We have to do it in enqueue_to_backlog
context when the local IRQ is disabled. As result, after the
flush_backlog and synchronize_net sequence all packets
should be accounted.

Thanks to Eric W. Biederman for the test script and his
valuable feedback!

Reported-by: Vittorio Gambaletta 
Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman 
Cc: Stephen Hemminger 
Signed-off-by: Julian Anastasov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "dev: set iflink to 0 for virtual interfaces"

2015-09-29T17:26:20+00:00

[ Upstream commit 95ec655bc465ccb2a3329d4aff9a45e3c8188db5 ]

This reverts commit e1622baf54df8cc958bf29d71de5ad545ea7d93c.

The side effect of this commit is to add a '@NONE' after each virtual
interface name with a 'ip link'. It may break existing scripts.

Reported-by: Olivier Hartkopp 
Signed-off-by: Nicolas Dichtel 
Tested-by: Oliver Hartkopp 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: graceful exit from netif_alloc_netdev_queues()

2015-09-29T17:26:20+00:00

[ Upstream commit d339727c2b1a10f25e6636670ab6e1841170e328 ]

User space can crash kernel with

ip link add ifb10 numtxqueues 100000 type ifb

We must replace a BUG_ON() by proper test and return -EINVAL for
crazy values.

Fixes: 60877a32bce00 ("net: allow large number of tx queues")
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: replace last open coded skb_orphan_frags with function call

2015-06-08T19:15:13+00:00

Commit 70008aa50e92 ("skbuff: convert to skb_orphan_frags") replaced
open coded tests of SKBTX_DEV_ZEROCOPY and skb_copy_ubufs with calls
to helper function skb_orphan_frags. Apply that to the last remaining
open coded site.

Signed-off-by: Willem de Bruijn 
Acked-by: Michael S. Tsirkin 
Signed-off-by: David S. Miller

net: core: Correct an over-stringent device loop detection.

2015-05-04T18:57:59+00:00

The code in __netdev_upper_dev_link() has an over-stringent
loop detection logic that actually prevents valid configurations
from working correctly.

In particular, the logic returns an error if an upper device
is already in the list of all upper devices for a given dev.
This particular check seems to be a overzealous as it disallows
perfectly valid configurations.  For example:
  # ip l a link eth0 name eth0.10 type vlan id 10
  # ip l a dev br0 typ bridge
  # ip l s eth0.10 master br0
  # ip l s eth0 master br0  <--- Will fail

If you switch the last two commands (add eth0 first), then both
will succeed.  If after that, you remove eth0 and try to re-add
it, it will fail!

It appears to be enough to simply check adj_list to keeps things
safe.

I've tried stacking multiple devices multiple times in all different
combinations, and either rx_handler registration prevented the stacking
of the device linking cought the error.

Signed-off-by: Vladislav Yasevich 
Acked-by: Jiri Pirko 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller

net: rfs: fix crash in get_rps_cpus()

2015-04-26T20:07:57+00:00

Commit 567e4b79731c ("net: rfs: add hash collision detection") had one
mistake :

RPS_NO_CPU is no longer the marker for invalid cpu in set_rps_cpu()
and get_rps_cpu(), as @next_cpu was the result of an AND with
rps_cpu_mask

This bug showed up on a host with 72 cpus :
next_cpu was 0x7f, and the code was trying to access percpu data of an
non existent cpu.

In a follow up patch, we might get rid of compares against nr_cpu_ids,
if we init the tables with 0. This is silly to test for a very unlikely
condition that exists only shortly after table initialization, as
we got rid of rps_reset_sock_flow() and similar functions that were
writing this RPS_NO_CPU magic value at flow dismantle : When table is
old enough, it never contains this value anymore.

Fixes: 567e4b79731c ("net: rfs: add hash collision detection")
Signed-off-by: Eric Dumazet 
Cc: Tom Herbert 
Cc: Ben Hutchings 
Signed-off-by: David S. Miller