linux-stable.git/net/core/dev.c, branch linux-2.6.33.y

net: Fix a memmove bug in dev_gro_receive()

2011-11-07T21:47:33+00:00

commit e5093aec2e6b60c3df2420057ffab9ed4a6d2792 upstream.

>Xin Xiaohui wrote:
> I looked into the code dev_gro_receive(), found the code here:
> if the frags[0] is pulled to 0, then the page will be released,
> and memmove() frags left.
> Is that right? I'm not sure if memmove do right or not, but
> frags[0].size is never set after memove at least. what I think
> a simple way is not to do anything if we found frags[0].size == 0.
> The patch is as followed.
...

This version of the patch fixes the bug directly in memmove.

Reported-by: "Xin, Xiaohui" 
Signed-off-by: Jarek Poplawski 
Signed-off-by: David S. Miller 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

gro: reset skb_iif on reuse

2011-04-14T23:53:10+00:00

commit 6d152e23ad1a7a5b40fef1f42e017d66e6115159 upstream.

Like Herbert's change from a few days ago:

66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse

this may not be necessary at this point, but we should still clean up
the skb->skb_iif.  If not we may end up with an invalid valid for
skb->skb_iif when the skb is reused and the check is done in
__netif_receive_skb.

Signed-off-by: Andy Gospodarek 
Signed-off-by: David S. Miller 
Signed-off-by: Brandon Philips 
Signed-off-by: Greg Kroah-Hartman

gro: Reset dev pointer on reuse

2011-04-14T23:53:09+00:00

commit 66c46d741e2e60f0e8b625b80edb0ab820c46d7a upstream.

On older kernels the VLAN code may zero skb->dev before dropping
it and causing it to be reused by GRO.

Unfortunately we didn't reset skb->dev in that case which causes
the next GRO user to get a bogus skb->dev pointer.

This particular problem no longer happens with the current upstream
kernel due to changes in VLAN processing.

However, for correctness we should still reset the skb->dev pointer
in the GRO reuse function in case a future user does the same thing.

Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Brandon Philips 
Signed-off-by: Greg Kroah-Hartman

net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

2011-03-21T19:45:36+00:00

commit 8909c9ad8ff03611c9c96c9a92656213e4bb495b upstream.

Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203

Signed-off-by: Vasiliy Kulikov 
Signed-off-by: Michael Tokarev 
Acked-by: David S. Miller 
Acked-by: Kees Cook 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

net: deinit automatic LIST_HEAD

2011-03-21T19:45:11+00:00

commit ceaaec98ad99859ac90ac6863ad0a6cd075d8e0e upstream.

commit 9b5e383c11b08784 (net: Introduce
unregister_netdevice_many()) left an active LIST_HEAD() in
rollback_registered(), with possible memory corruption.

Even if device is freed without touching its unreg_list (and therefore
touching the previous memory location holding LISTE_HEAD(single), better
close the bug for good, since its really subtle.

(Same fix for default_device_exit_batch() for completeness)

Reported-by: Michal Hocko 
Tested-by: Michal Hocko 
Reported-by: Eric W. Biderman 
Tested-by: Eric W. Biderman 
Signed-off-by: Linus Torvalds 
Signed-off-by: Eric Dumazet 
CC: Ingo Molnar 
CC: Octavian Purdila 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: NETIF_F_HW_CSUM does not imply FCoE CRC offload

2011-03-21T19:43:49+00:00

commit 66c68bcc489fadd4f5e8839e966e3a366e50d1d5 upstream.

NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit
checksum with the checksum of an arbitrary part of the packet data,
whereas the FCoE CRC is something entirely different.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix problem in reading sock TX queue

2010-08-02T17:26:28+00:00

commit b0f77d0eae0c58a5a9691a067ada112ceeae2d00 upstream.

Fix problem in reading the tx_queue recorded in a socket.  In
dev_pick_tx, the TX queue is read by doing a check with
sk_tx_queue_recorded on the socket, followed by a sk_tx_queue_get.
The problem is that there is not mutual exclusion across these
calls in the socket so it it is possible that the queue in the
sock can be invalidated after sk_tx_queue_recorded is called so
that sk_tx_queue get returns -1, which sets 65535 in queue_index
and thus dev_pick_tx returns 65536 which is a bogus queue and
can cause crash in dev_queue_xmit.

We fix this by only calling sk_tx_queue_get which does the proper
checks.  The interface is that sk_tx_queue_get returns the TX queue
if the sock argument is non-NULL and TX queue is recorded, else it
returns -1.  sk_tx_queue_recorded is no longer used so it can be
completely removed.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

veth: Dont kfree_skb() after dev_forward_skb()

2010-08-02T17:26:25+00:00

[ Upstream commit 6ec82562ffc6f297d0de36d65776cff8e5704867 ]

In case of congestion, netif_rx() frees the skb, so we must assume
dev_forward_skb() also consume skb.

Bug introduced by commit 445409602c092
(veth: move loopback logic to common location)

We must change dev_forward_skb() to always consume skb, and veth to not
double free it.

Bug report : http://marc.info/?l=linux-netdev&m=127310770900442&w=3

Reported-by: Martín Ferrari 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Potential null skb->dev dereference

2010-04-01T23:02:10+00:00

[ Upstream commit 0641e4fbf2f824faee00ea74c459a088d94905fd ]

When doing "ifenslave -d bond0 eth0", there is chance to get NULL
dereference in netif_receive_skb(), because dev->master suddenly becomes
NULL after we tested it.

We should use ACCESS_ONCE() to avoid this (or rcu_dereference())

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bug fix for vlan + gro issue

2010-02-24T03:09:31+00:00

Traffic (tcp) doesnot start on a vlan interface when gro is enabled.
Even the tcp handshake was not taking place.
This is because, the eth_type_trans call before the netif_receive_skb
in napi_gro_finish() resets the skb->dev to napi->dev from the previously
set vlan netdev interface. This causes the ip_route_input to drop the
incoming packet considering it as a packet coming from a martian source.

I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7.
With this fix, the traffic starts and the test runs fine on both vlan
and non-vlan interfaces.

CC: Herbert Xu 
CC: Patrick McHardy 
Signed-off-by: Ajit Khaparde 
Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller