linux-stable.git/net/core/dev.c, branch linux-2.6.32.y Linux kernel stable tree net: reject creation of netdev names with colons 2015-05-24T08:10:46+00:00 Matthew Thode mthode@mthode.org 2015-02-18T00:31:57+00:00 a7357ca5c20572ac9609a87be884f1e87bd28185 [ Upstream commit a4176a9391868bfa87705bcd2e3b49e9b9dd2996 ] colons are used as a separator in netdev device lookup in dev_ioctl.c Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME Signed-off-by: Matthew Thode <mthode@mthode.org> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> (cherry picked from commit d501ebeb7da7531e92e3c8d194730341c314ff2d) Signed-off-by: Willy Tarreau <w@1wt.eu> 
[ Upstream commit a4176a9391868bfa87705bcd2e3b49e9b9dd2996 ]

colons are used as a separator in netdev device lookup in dev_ioctl.c

Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME

Signed-off-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
(cherry picked from commit d501ebeb7da7531e92e3c8d194730341c314ff2d)

Signed-off-by: Willy Tarreau <w@1wt.eu>
net: core: Always propagate flag changes to interfaces 2014-05-19T05:54:04+00:00 Vlad Yasevich vyasevic@redhat.com 2013-11-20T01:47:15+00:00 27770ad06226eda3cbf16cb05eea5c11e08895d6 [ Upstream commit d2615bf450694c1302d86b9cc8a8958edfe4c3a4 ] The following commit: b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 net: only invoke dev->change_rx_flags when device is UP tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down. A later commit: deede2fabe24e00bd7e246eb81cd5767dc6fcfc7 vlan: Don't propagate flag changes on down interfaces fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN. The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following: eth0----> bond0 ----> bridge0 ---> vlan50 If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface. The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave it to the individual devices to decide whether they will block flag propagation or not. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu> 
[ Upstream commit d2615bf450694c1302d86b9cc8a8958edfe4c3a4 ]

The following commit:
    b6c40d68ff6498b7f63ddf97cf0aa818d748dee7
    net: only invoke dev->change_rx_flags when device is UP

tried to fix a problem with VLAN devices and promiscuouse flag setting.
The issue was that VLAN device was setting a flag on an interface that
was down, thus resulting in bad promiscuity count.
This commit blocked flag propagation to any device that is currently
down.

A later commit:
    deede2fabe24e00bd7e246eb81cd5767dc6fcfc7
    vlan: Don't propagate flag changes on down interfaces

fixed VLAN code to only propagate flags when the VLAN interface is up,
thus fixing the same issue as above, only localized to VLAN.

The problem we have now is that if we have create a complex stack
involving multiple software devices like bridges, bonds, and vlans,
then it is possible that the flags would not propagate properly to
the physical devices.  A simple examle of the scenario is the
following:

  eth0----> bond0 ----> bridge0 ---> vlan50

If bond0 or eth0 happen to be down at the time bond0 is added to
the bridge, then eth0 will never have promisc mode set which is
currently required for operation as part of the bridge.  As a
result, packets with vlan50 will be dropped by the interface.

The only 2 devices that implement the special flag handling are
VLAN and DSA and they both have required code to prevent incorrect
flag propagation.  As a result we can remove the generic solution
introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave
it to the individual devices to decide whether they will block
flag propagation or not.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Suggested-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
net: reduce net_rx_action() latency to 2 HZ 2013-06-10T09:43:24+00:00 Eric Dumazet edumazt@google.com 2013-03-05T07:15:13+00:00 e072f1c62ab6b74be00105c8db56eff6b760d42e We should use time_after_eq() to get maximum latency of two ticks, instead of three. Bug added in commit 24f8b2385 (net: increase receive packet quantum) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit d1f41b67ff7735193bc8b418b98ac99a448833e2) Signed-off-by: Willy Tarreau <w@1wt.eu> 
We should use time_after_eq() to get maximum latency of two ticks,
instead of three.

Bug added in commit 24f8b2385 (net: increase receive packet quantum)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit d1f41b67ff7735193bc8b418b98ac99a448833e2)
Signed-off-by: Willy Tarreau <w@1wt.eu>
net/core: Fix potential memory leak in dev_set_alias() 2013-06-10T09:43:24+00:00 Alexey Khoroshilov khoroshilov@ispras.ru 2012-08-08T00:33:25+00:00 b680135dfdf54a1d59efca19c432412f4ed481ea [ Upstream commit 7364e445f62825758fa61195d237a5b8ecdd06ec ] Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu> 
[ Upstream commit 7364e445f62825758fa61195d237a5b8ecdd06ec ]

Do not leak memory by updating pointer with potentially NULL realloc return value.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
net: feed /dev/random with the MAC address when registering a device 2012-10-07T21:41:20+00:00 Theodore Ts'o tytso@mit.edu 2012-07-05T01:23:25+00:00 4bc4a0f1e034193d7c78783271053d9b00e120e1 commit 7bf2357524408b97fec58344caf7397f8140c3fd upstream. Cc: David Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Willy Tarreau <w@1wt.eu> 
commit 7bf2357524408b97fec58344caf7397f8140c3fd upstream.

Cc: David Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
gro: reset vlan_tci on reuse 2011-12-09T17:21:40+00:00 Benjamin Poirier bpoirier@suse.de 2011-11-30T12:47:18+00:00 5aff28abc7e0ec1ddd562372ae4fa01e8e4d4073 This one liner is part of upstream commit 3701e51382a026cba10c60b03efabe534fba4ca4 Author: Jesse Gross <jesse@nicira.com> vlan: Centralize handling of hardware acceleration. The bulk of that commit is a rework of the hardware assisted vlan tagging driver interface, and as such doesn't classify for -stable inclusion. The fix that is needed is a part of that commit but can work independently of the rest. This patch can avoid panics on the 2.6.32.y -stable kernels and is in the same spirit as mainline commits 66c46d7 gro: Reset dev pointer on reuse 6d152e2 gro: reset skb_iif on reuse which are already in -stable. For drivers using the vlan_gro_frags() interface, a packet with an invalid tci leads to GRO_DROP and napi_reuse_skb(). The skb has to be sanitized before being reused or we may send an skb with an invalid vlan_tci field up the stack where it is not expected. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Cc: Jesse Gross <jesse@nicira.com> Acked-by: David S. Miller <davem@davemloft.net> 
This one liner is part of upstream
commit 3701e51382a026cba10c60b03efabe534fba4ca4
Author: Jesse Gross <jesse@nicira.com>

    vlan: Centralize handling of hardware acceleration.

The bulk of that commit is a rework of the hardware assisted vlan tagging
driver interface, and as such doesn't classify for -stable inclusion. The fix
that is needed is a part of that commit but can work independently of the
rest.

This patch can avoid panics on the 2.6.32.y -stable kernels and is in the same
spirit as mainline commits
66c46d7 gro: Reset dev pointer on reuse
6d152e2 gro: reset skb_iif on reuse
which are already in -stable.

For drivers using the vlan_gro_frags() interface, a packet with an invalid tci
leads to GRO_DROP and napi_reuse_skb(). The skb has to be sanitized before
being reused or we may send an skb with an invalid vlan_tci field up the stack
where it is not expected.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Cc: Jesse Gross <jesse@nicira.com>
Acked-by: David S. Miller <davem@davemloft.net>
gro: reset skb_iif on reuse 2011-04-14T23:53:41+00:00 Andy Gospodarek andy@greyhouse.net 2011-02-02T22:53:25+00:00 5381fb84ee42aba44952a94ef8ecc1d29c52fae3 commit 6d152e23ad1a7a5b40fef1f42e017d66e6115159 upstream. Like Herbert's change from a few days ago: 66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse this may not be necessary at this point, but we should still clean up the skb->skb_iif. If not we may end up with an invalid valid for skb->skb_iif when the skb is reused and the check is done in __netif_receive_skb. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 6d152e23ad1a7a5b40fef1f42e017d66e6115159 upstream.

Like Herbert's change from a few days ago:

66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse

this may not be necessary at this point, but we should still clean up
the skb->skb_iif.  If not we may end up with an invalid valid for
skb->skb_iif when the skb is reused and the check is done in
__netif_receive_skb.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gro: Reset dev pointer on reuse 2011-04-14T23:53:40+00:00 Herbert Xu herbert@gondor.apana.org.au 2011-01-30T04:44:54+00:00 2863e5a77bfad29694be0d72b965503de3fddb8d commit 66c46d741e2e60f0e8b625b80edb0ab820c46d7a upstream. On older kernels the VLAN code may zero skb->dev before dropping it and causing it to be reused by GRO. Unfortunately we didn't reset skb->dev in that case which causes the next GRO user to get a bogus skb->dev pointer. This particular problem no longer happens with the current upstream kernel due to changes in VLAN processing. However, for correctness we should still reset the skb->dev pointer in the GRO reuse function in case a future user does the same thing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 66c46d741e2e60f0e8b625b80edb0ab820c46d7a upstream.

On older kernels the VLAN code may zero skb->dev before dropping
it and causing it to be reused by GRO.

Unfortunately we didn't reset skb->dev in that case which causes
the next GRO user to get a bogus skb->dev pointer.

This particular problem no longer happens with the current upstream
kernel due to changes in VLAN processing.

However, for correctness we should still reset the skb->dev pointer
in the GRO reuse function in case a future user does the same thing.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules 2011-03-14T21:30:00+00:00 Vasiliy Kulikov segoon@openwall.com 2011-03-01T21:33:13+00:00 af4a02bb1eede764c1db87575462cbe1c023e164 commit 8909c9ad8ff03611c9c96c9a92656213e4bb495b upstream. Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with CAP_NET_ADMIN may load any module from /lib/modules/. This doesn't mean that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are limited to /lib/modules/**. However, CAP_NET_ADMIN capability shouldn't allow anybody load any module not related to networking. This patch restricts an ability of autoloading modules to netdev modules with explicit aliases. This fixes CVE-2011-1019. Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior of loading netdev modules by name (without any prefix) for processes with CAP_SYS_MODULE to maintain the compatibility with network scripts that use autoloading netdev modules by aliases like "eth0", "wlan0". Currently there are only three users of the feature in the upstream kernel: ipip, ip_gre and sit. root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) -- root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: fffffff800001000 CapEff: fffffff800001000 CapBnd: fffffff800001000 root@albatros:~# modprobe xfs FATAL: Error inserting xfs (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted root@albatros:~# lsmod | grep xfs root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit sit: error fetching interface information: Device not found root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit0 sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 root@albatros:~# lsmod | grep sit sit 10457 0 tunnel4 2957 1 sit For CAP_SYS_MODULE module loading is still relaxed: root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: ffffffffffffffff CapEff: ffffffffffffffff CapBnd: ffffffffffffffff root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs xfs 745319 0 Reference: https://lkml.org/lkml/2011/2/24/203 Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 8909c9ad8ff03611c9c96c9a92656213e4bb495b upstream.

Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
net: release dst entry while cache-hot for GSO case too 2011-01-07T22:43:14+00:00 Krishna Kumar krkumar2@in.ibm.com 2009-12-09T20:59:58+00:00 60a517cab5e8885d8873bfa3acc2a138fbb7fb9c commit 068a2de57ddf4f472e32e7af868613c574ad1d88 upstream. Non-GSO code drops dst entry for performance reasons, but the same is missing for GSO code. Drop dst while cache-hot for GSO case too. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 068a2de57ddf4f472e32e7af868613c574ad1d88 upstream.

Non-GSO code drops dst entry for performance reasons, but
the same is missing for GSO code. Drop dst while cache-hot
for GSO case too.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>