__sys_setsockopt() already checks for `optlen < 0`. Add an equivalent check
to the compat path for robustness. This has to be `> INT_MAX` instead of
`< 0` because the signedness of `optlen` is different here.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:
 "Several fixes here. Basically split down the line between newly
  introduced regressions and long existing problems:

   1) Double free in tipc_enable_bearer(), from Cong Wang.

   2) Many fixes to nf_conncount, from Florian Westphal.

   3) op->get_regs_len() can throw an error, check it, from Yunsheng
      Lin.

   4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman
      driver, from Scott Wood.

   5) Inifnite loop in fib_empty_table(), from Yue Haibing.

   6) Use after free in ax25_fillin_cb(), from Cong Wang.

   7) Fix socket locking in nr_find_socket(), also from Cong Wang.

   8) Fix WoL wakeup enable in r8169, from Heiner Kallweit.

   9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani.

  10) Fix ptr_ring wrap during queue swap, from Cong Wang.

  11) Missing shutdown callback in hinic driver, from Xue Chaojing.

  12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano
      Brivio.

  13) BPF out of bounds speculation fixes from Daniel Borkmann"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
  ipv6: Consider sk_bound_dev_if when binding a socket to an address
  ipv6: Fix dump of specific table with strict checking
  bpf: add various test cases to selftests
  bpf: prevent out of bounds speculation on pointer arithmetic
  bpf: fix check_map_access smin_value test when pointer contains offset
  bpf: restrict unknown scalars of mixed signed bounds for unprivileged
  bpf: restrict stack pointer arithmetic for unprivileged
  bpf: restrict map value pointer arithmetic for unprivileged
  bpf: enable access to ax register also from verifier rewrite
  bpf: move tmp variable into ax register in interpreter
  bpf: move {prev_,}insn_idx into verifier env
  isdn: fix kernel-infoleak in capi_unlocked_ioctl
  ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
  net/hamradio/6pack: use mod_timer() to rearm timers
  net-next/hinic:add shutdown callback
  net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
  ip: validate header length on virtual device xmit
  tap: call skb_probe_transport_header after setting skb->dev
  ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
  net: rds: remove unnecessary NULL check
  ...

Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.

sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.

Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.

Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.

The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a0c ("net: reorganize struct sock for better data
locality")

Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

recvmmsg() takes two arguments to pointers of structures that differ
between 32-bit and 64-bit architectures: mmsghdr and timespec.

For y2038 compatbility, we are changing the native system call from
timespec to __kernel_timespec with a 64-bit time_t (in another patch),
and use the existing compat system call on both 32-bit and 64-bit
architectures for compatibility with traditional 32-bit user space.

As we now have two variants of recvmmsg() for 32-bit tasks that are both
different from the variant that we use on 64-bit tasks, this means we
also require two compat system calls!

The solution I picked is to flip things around: The existing
compat_sys_recvmmsg() call gets moved from net/compat.c into net/socket.c
and now handles the case for old user space on all architectures that
have set CONFIG_COMPAT_32BIT_TIME.  A new compat_sys_recvmmsg_time64()
call gets added in the old place for 64-bit architectures only, this
one handles the case of a compat mmsghdr structure combined with
__kernel_timespec.

In the indirect sys_socketcall(), we now need to call either
do_sys_recvmmsg() or __compat_sys_recvmmsg(), depending on what kind of
architecture we are on. For compat_sys_socketcall(), no such change is
needed, we always call __compat_sys_recvmmsg().

I decided to not add a new SYS_RECVMMSG_TIME64 socketcall: Any libc
implementation for 64-bit time_t will need significant changes including
an updated asm/unistd.h, and it seems better to consistently use the
separate syscalls that configuration, leaving the socketcall only for
backward compatibility with 32-bit time_t based libc.

The naming is asymmetric for the moment, so both existing syscalls
entry points keep their names, while the new ones are recvmmsg_time32
and compat_recvmmsg_time64 respectively. I expect that we will rename
the compat syscalls later as we start using generated syscall tables
everywhere and add these entry points.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This converts the recvmmsg() system call in all its variations to use
'timespec64' internally for its timeout, and have a __kernel_timespec64
argument in the native entry point. This lets us change the type to use
64-bit time_t at a later point while using the 32-bit compat system call
emulation for existing user space.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:

Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.

The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:

old				new
---				---
compat_time_t			old_time32_t
struct compat_timeval		struct old_timeval32
struct compat_timespec		struct old_timespec32
struct compat_itimerspec	struct old_itimerspec32
ns_to_compat_timeval()		ns_to_old_timeval32()
get_compat_itimerspec64()	get_old_itimerspec32()
put_compat_itimerspec64()	put_old_itimerspec32()
compat_get_timespec64()		get_old_timespec32()
compat_put_timespec64()		put_old_timespec32()

As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.

I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.

This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The sock_flag() check is alreay inside sock_enable_timestamp(), so it is
unnecessary checking it in the caller.

    void sock_enable_timestamp(struct sock *sk, int flag)
    {
        if (!sock_flag(sk, flag)) {
            ...
        }
    }

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For the x32 ABI, struct timeval has two 64-bit fields. However
the kernel currently interprets the user-space values used for
the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair
of 32-bit fields.

When the seconds portion of the requested timeout is less than 2**32,
the seconds portion of the effective timeout is correct but the
microseconds portion is zero.  When the seconds portion of the
requested timeout is zero and the microseconds portion is non-zero,
the kernel interprets the timeout as zero (never timeout).

Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required
for the ABI.

The code included below demonstrates the problem.

Results before patch:
    $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.008181 seconds
    send time: 2.015985 seconds

    $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.016763 seconds
    send time: 2.016062 seconds

    $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 1.007239 seconds
    send time: 1.023890 seconds

Results after patch:
    $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.010062 seconds
    send time: 2.015836 seconds

    $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.013974 seconds
    send time: 2.015981 seconds

    $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.030257 seconds
    send time: 2.013383 seconds

 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/socket.h>
 #include <sys/types.h>
 #include <sys/time.h>

 void checkrc(char *str, int rc)
 {
         if (rc >= 0)
                 return;

         perror(str);
         exit(1);
 }

 static char buf[1024];
 int main(int argc, char **argv)
 {
         int rc;
         int socks[2];
         struct timeval tv;
         struct timeval start, end, delta;

         rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
         checkrc("socketpair", rc);

         /* set timeout to 1.999999 seconds */
         tv.tv_sec = 1;
         tv.tv_usec = 999999;
         rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv);
         rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv);
         checkrc("setsockopt", rc);

         /* measure actual receive timeout */
         gettimeofday(&start, NULL);
         rc = recv(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("recv time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);

         /* fill send buffer */
         do {
                 rc = send(socks[0], buf, sizeof buf, 0);
         } while (rc > 0);

         /* measure actual send timeout */
         gettimeofday(&start, NULL);
         rc = send(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("send time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);
         exit(0);
 }

Fixes: 515c7af85ed9 ("x32: Use compat shims for {g,s}etsockopt")
Reported-by: Gopal RajagopalSai <gopalsr83@gmail.com>
Signed-off-by: Lance Richardson <lance.richardson.net@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using the net-internal helpers __compat_sys_...msg() allows us to avoid
the internal calls to the compat_sys_...msg() syscalls.
compat_sys_recvmmsg() is handled in a different patch.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>