<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/net/ceph, branch v5.13.2</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>libceph: set global_id as soon as we get an auth ticket</title>
<updated>2021-06-24T19:03:17+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-06-21T10:17:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=03af4c7bad8ca59143bca488b90b3775d10d7f94'/>
<id>03af4c7bad8ca59143bca488b90b3775d10d7f94</id>
<content type='text'>
Commit 61ca49a9105f ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much.  It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies).  When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.

Moving the setting of global_id into protocol implementations.  This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.

Fixes: 61ca49a9105f ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 61ca49a9105f ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much.  It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies).  When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.

Moving the setting of global_id into protocol implementations.  This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.

Fixes: 61ca49a9105f ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: don't pass result into ac-&gt;ops-&gt;handle_reply()</title>
<updated>2021-06-24T19:03:16+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-06-21T09:53:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3c0d0894320cc517fda657c69939cd0313d0b4e2'/>
<id>3c0d0894320cc517fda657c69939cd0313d0b4e2</id>
<content type='text'>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client</title>
<updated>2021-05-06T17:27:02+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-05-06T17:27:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7ac86b3dca1b00f5391d346fdea3ac010d230667'/>
<id>7ac86b3dca1b00f5391d346fdea3ac010d230667</id>
<content type='text'>
Pull ceph updates from Ilya Dryomov:
 "Notable items here are

   - a series to take advantage of David Howells' netfs helper library
     from Jeff

   - three new filesystem client metrics from Xiubo

   - ceph.dir.rsnaps vxattr from Yanhu

   - two auth-related fixes from myself, marked for stable.

  Interspersed is a smattering of assorted fixes and cleanups across the
  filesystem"

* tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client: (24 commits)
  libceph: allow addrvecs with a single NONE/blank address
  libceph: don't set global_id until we get an auth ticket
  libceph: bump CephXAuthenticate encoding version
  ceph: don't allow access to MDS-private inodes
  ceph: fix up some bare fetches of i_size
  ceph: convert some PAGE_SIZE invocations to thp_size()
  ceph: support getting ceph.dir.rsnaps vxattr
  ceph: drop pinned_page parameter from ceph_get_caps
  ceph: fix inode leak on getattr error in __fh_to_dentry
  ceph: only check pool permissions for regular files
  ceph: send opened files/pinned caps/opened inodes metrics to MDS daemon
  ceph: avoid counting the same request twice or more
  ceph: rename the metric helpers
  ceph: fix kerneldoc copypasta over ceph_start_io_direct
  ceph: use attach/detach_page_private for tracking snap context
  ceph: don't use d_add in ceph_handle_snapdir
  ceph: don't clobber i_snap_caps on non-I_NEW inode
  ceph: fix fall-through warnings for Clang
  ceph: convert ceph_readpages to ceph_readahead
  ceph: convert ceph_write_begin to netfs_write_begin
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ceph updates from Ilya Dryomov:
 "Notable items here are

   - a series to take advantage of David Howells' netfs helper library
     from Jeff

   - three new filesystem client metrics from Xiubo

   - ceph.dir.rsnaps vxattr from Yanhu

   - two auth-related fixes from myself, marked for stable.

  Interspersed is a smattering of assorted fixes and cleanups across the
  filesystem"

* tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client: (24 commits)
  libceph: allow addrvecs with a single NONE/blank address
  libceph: don't set global_id until we get an auth ticket
  libceph: bump CephXAuthenticate encoding version
  ceph: don't allow access to MDS-private inodes
  ceph: fix up some bare fetches of i_size
  ceph: convert some PAGE_SIZE invocations to thp_size()
  ceph: support getting ceph.dir.rsnaps vxattr
  ceph: drop pinned_page parameter from ceph_get_caps
  ceph: fix inode leak on getattr error in __fh_to_dentry
  ceph: only check pool permissions for regular files
  ceph: send opened files/pinned caps/opened inodes metrics to MDS daemon
  ceph: avoid counting the same request twice or more
  ceph: rename the metric helpers
  ceph: fix kerneldoc copypasta over ceph_start_io_direct
  ceph: use attach/detach_page_private for tracking snap context
  ceph: don't use d_add in ceph_handle_snapdir
  ceph: don't clobber i_snap_caps on non-I_NEW inode
  ceph: fix fall-through warnings for Clang
  ceph: convert ceph_readpages to ceph_readahead
  ceph: convert ceph_write_begin to netfs_write_begin
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: allow addrvecs with a single NONE/blank address</title>
<updated>2021-05-04T14:06:15+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-05-03T15:09:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3f1c6f2122fc780560f09735b6d1dbf39b44eb0f'/>
<id>3f1c6f2122fc780560f09735b6d1dbf39b44eb0f</id>
<content type='text'>
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE.  Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.

Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE.  Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.

Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: don't set global_id until we get an auth ticket</title>
<updated>2021-04-27T21:52:24+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-04-26T17:11:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=61ca49a9105faefa003b37542cebad8722f8ae22'/>
<id>61ca49a9105faefa003b37542cebad8722f8ae22</id>
<content type='text'>
With the introduction of enforcing mode, setting global_id as soon
as we get it in the first MAuth reply will result in EACCES if the
connection is reset before we get the second MAuth reply containing
an auth ticket -- because on retry we would attempt to reclaim that
global_id with no auth ticket at hand.

Neither ceph_auth_client nor ceph_mon_client depend on global_id
being set ealy, so just delay the setting until we get and process
the second MAuth reply.  While at it, complain if the monitor sends
a zero global_id or changes our global_id as the session is likely
to fail after that.

Cc: stable@vger.kernel.org # needs backporting for &lt; 5.11
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
With the introduction of enforcing mode, setting global_id as soon
as we get it in the first MAuth reply will result in EACCES if the
connection is reset before we get the second MAuth reply containing
an auth ticket -- because on retry we would attempt to reclaim that
global_id with no auth ticket at hand.

Neither ceph_auth_client nor ceph_mon_client depend on global_id
being set ealy, so just delay the setting until we get and process
the second MAuth reply.  While at it, complain if the monitor sends
a zero global_id or changes our global_id as the session is likely
to fail after that.

Cc: stable@vger.kernel.org # needs backporting for &lt; 5.11
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: bump CephXAuthenticate encoding version</title>
<updated>2021-04-27T21:52:24+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-04-14T08:38:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7807dafda21a549403d922da98dde0ddfeb70d08'/>
<id>7807dafda21a549403d922da98dde0ddfeb70d08</id>
<content type='text'>
A dummy v3 encoding (exactly the same as v2) was introduced so that
the monitors can distinguish broken clients that may not include their
auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus
failing to prove previous possession of their global_id (one part of
CVE-2021-20288).

The kernel client has always included its auth ticket, so it is
compatible with enforcing mode as is.  However we want to bump the
encoding version to avoid having to authenticate twice on the initial
connect -- all legacy (CephXAuthenticate &lt; v3) are now forced do so in
order to expose insecure global_id reclaim.

Marking for stable since at least for 5.11 and 5.12 it is trivial
(v2 -&gt; v3).

Cc: stable@vger.kernel.org # 5.11+
URL: https://tracker.ceph.com/issues/50452
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
A dummy v3 encoding (exactly the same as v2) was introduced so that
the monitors can distinguish broken clients that may not include their
auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus
failing to prove previous possession of their global_id (one part of
CVE-2021-20288).

The kernel client has always included its auth ticket, so it is
compatible with enforcing mode as is.  However we want to bump the
encoding version to avoid having to authenticate twice on the initial
connect -- all legacy (CephXAuthenticate &lt; v3) are now forced do so in
order to expose insecure global_id reclaim.

Marking for stable since at least for 5.11 and 5.12 it is trivial
(v2 -&gt; v3).

Cc: stable@vger.kernel.org # 5.11+
URL: https://tracker.ceph.com/issues/50452
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: ceph: Fix a typo in osdmap.c</title>
<updated>2021-03-26T00:05:07+00:00</updated>
<author>
<name>Lu Wei</name>
<email>luwei32@huawei.com</email>
</author>
<published>2021-03-25T06:38:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3f9143f10c3d5055093b18fd3eaa8fc6d1b460f5'/>
<id>3f9143f10c3d5055093b18fd3eaa8fc6d1b460f5</id>
<content type='text'>
Modify "inital" to "initial" in net/ceph/osdmap.c.

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: Lu Wei &lt;luwei32@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Modify "inital" to "initial" in net/ceph/osdmap.c.

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: Lu Wei &lt;luwei32@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: remove osdtimeout option entirely</title>
<updated>2021-02-16T11:09:52+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-01-22T15:50:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d7ef2e59e3b908285fbbb815c4547bdba4299890'/>
<id>d7ef2e59e3b908285fbbb815c4547bdba4299890</id>
<content type='text'>
Commit 83aff95eb9d6 ("libceph: remove 'osdtimeout' option") deprecated
osdtimeout over 8 years ago, but it is still recognized.  Let's remove
it entirely.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 83aff95eb9d6 ("libceph: remove 'osdtimeout' option") deprecated
osdtimeout over 8 years ago, but it is still recognized.  Let's remove
it entirely.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: deprecate [no]cephx_require_signatures options</title>
<updated>2021-02-16T11:09:52+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-01-22T14:41:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=afd56e78dd179d5638333bb407d9f7da2863381a'/>
<id>afd56e78dd179d5638333bb407d9f7da2863381a</id>
<content type='text'>
These options were introduced in 3.19 with support for message signing
and are rather useless, as explained in commit a51983e4dd2d ("libceph:
add nocephx_sign_messages option").  Deprecate them.

In case there is someone out there with a cluster that lacks support
for MSG_AUTH feature (very unlikely but has to be considered since we
haven't formally raised the bar from argonaut to bobtail yet), make
nocephx_sign_messages also waive MSG_AUTH requirement.  This is probably
how it should have been done in the first place -- if we aren't going
to sign, requiring the signing feature makes no sense.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
These options were introduced in 3.19 with support for message signing
and are rather useless, as explained in commit a51983e4dd2d ("libceph:
add nocephx_sign_messages option").  Deprecate them.

In case there is someone out there with a cluster that lacks support
for MSG_AUTH feature (very unlikely but has to be considered since we
haven't formally raised the bar from argonaut to bobtail yet), make
nocephx_sign_messages also waive MSG_AUTH requirement.  This is probably
how it should have been done in the first place -- if we aren't going
to sign, requiring the signing feature makes no sense.

Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
Reviewed-by: Jeff Layton &lt;jlayton@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: fix "Boolean result is used in bitwise operation" warning</title>
<updated>2021-01-21T15:49:59+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>idryomov@gmail.com</email>
</author>
<published>2021-01-20T13:49:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9d5ae6f3c50a6f718b6d4be3c7b0828966e01b05'/>
<id>9d5ae6f3c50a6f718b6d4be3c7b0828966e01b05</id>
<content type='text'>
This line dates back to 2013, but cppcheck complained because commit
2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own
file") moved it.  Add parenthesis to silence the warning.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This line dates back to 2013, but cppcheck complained because commit
2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own
file") moved it.  Add parenthesis to silence the warning.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Signed-off-by: Ilya Dryomov &lt;idryomov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
