<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/net/ceph, branch v3.14.23</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>libceph: gracefully handle large reply messages from the mon</title>
<updated>2014-09-17T16:19:29+00:00</updated>
<author>
<name>Sage Weil</name>
<email>sage@redhat.com</email>
</author>
<published>2014-08-04T14:01:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d6e22ca59611f6df36c00b359e639d77004a2278'/>
<id>d6e22ca59611f6df36c00b359e639d77004a2278</id>
<content type='text'>
commit 73c3d4812b4c755efeca0140f606f83772a39ce4 upstream.

We preallocate a few of the message types we get back from the mon.  If we
get a larger message than we are expecting, fall back to trying to allocate
a new one instead of blindly using the one we have.

Signed-off-by: Sage Weil &lt;sage@redhat.com&gt;
Reviewed-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 73c3d4812b4c755efeca0140f606f83772a39ce4 upstream.

We preallocate a few of the message types we get back from the mon.  If we
get a larger message than we are expecting, fall back to trying to allocate
a new one instead of blindly using the one we have.

Signed-off-by: Sage Weil &lt;sage@redhat.com&gt;
Reviewed-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: do not hard code max auth ticket len</title>
<updated>2014-09-17T16:19:26+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-09-09T15:39:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9956752afa398ea6e0c9c69b258be6afd73da4b1'/>
<id>9956752afa398ea6e0c9c69b258be6afd73da4b1</id>
<content type='text'>
commit c27a3e4d667fdcad3db7b104f75659478e0c68d8 upstream.

We hard code cephx auth ticket buffer size to 256 bytes.  This isn't
enough for any moderate setups and, in case tickets themselves are not
encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but
ceph_decode_copy() doesn't - it's just a memcpy() wrapper).  Since the
buffer is allocated dynamically anyway, allocated it a bit later, at
the point where we know how much is going to be needed.

Fixes: http://tracker.ceph.com/issues/8979

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c27a3e4d667fdcad3db7b104f75659478e0c68d8 upstream.

We hard code cephx auth ticket buffer size to 256 bytes.  This isn't
enough for any moderate setups and, in case tickets themselves are not
encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but
ceph_decode_copy() doesn't - it's just a memcpy() wrapper).  Since the
buffer is allocated dynamically anyway, allocated it a bit later, at
the point where we know how much is going to be needed.

Fixes: http://tracker.ceph.com/issues/8979

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: add process_one_ticket() helper</title>
<updated>2014-09-17T16:19:26+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-09-08T13:25:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5083cbcde0fd0596acd087cb2f4c338ae33b11ab'/>
<id>5083cbcde0fd0596acd087cb2f4c338ae33b11ab</id>
<content type='text'>
commit 597cda357716a3cf8d994cb11927af917c8d71fa upstream.

Add a helper for processing individual cephx auth tickets.  Needed for
the next commit, which deals with allocating ticket buffers.  (Most of
the diff here is whitespace - view with git diff -b).

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 597cda357716a3cf8d994cb11927af917c8d71fa upstream.

Add a helper for processing individual cephx auth tickets.  Needed for
the next commit, which deals with allocating ticket buffers.  (Most of
the diff here is whitespace - view with git diff -b).

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly</title>
<updated>2014-09-17T16:19:25+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-08-08T08:43:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b15481d2e956411e70bbfbbf715bc264a67c23c3'/>
<id>b15481d2e956411e70bbfbbf715bc264a67c23c3</id>
<content type='text'>
commit 5f740d7e1531099b888410e6bab13f68da9b1a4d upstream.

Determining -&gt;last_piece based on the value of -&gt;page_offset + length
is incorrect because length here is the length of the entire message.
-&gt;last_piece set to false even if page array data item length is &lt;=
PAGE_SIZE, which results in invalid length passed to
ceph_tcp_{send,recv}page() and causes various asserts to fire.

    # cat pages-cursor-init.sh
    #!/bin/bash
    rbd create --size 10 --image-format 2 foo
    FOO_DEV=$(rbd map foo)
    dd if=/dev/urandom of=$FOO_DEV bs=1M &amp;&gt;/dev/null
    rbd snap create foo@snap
    rbd snap protect foo@snap
    rbd clone foo@snap bar
    # rbd_resize calls librbd rbd_resize(), size is in bytes
    ./rbd_resize bar $(((4 &lt;&lt; 20) + 512))
    rbd resize --size 10 bar
    BAR_DEV=$(rbd map bar)
    # trigger a 512-byte copyup -- 512-byte page array data item
    dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5

The problem exists only in ceph_msg_data_pages_cursor_init(),
ceph_msg_data_pages_advance() does the right thing.  The size_t cast is
unnecessary.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Reviewed-by: Alex Elder &lt;elder@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5f740d7e1531099b888410e6bab13f68da9b1a4d upstream.

Determining -&gt;last_piece based on the value of -&gt;page_offset + length
is incorrect because length here is the length of the entire message.
-&gt;last_piece set to false even if page array data item length is &lt;=
PAGE_SIZE, which results in invalid length passed to
ceph_tcp_{send,recv}page() and causes various asserts to fire.

    # cat pages-cursor-init.sh
    #!/bin/bash
    rbd create --size 10 --image-format 2 foo
    FOO_DEV=$(rbd map foo)
    dd if=/dev/urandom of=$FOO_DEV bs=1M &amp;&gt;/dev/null
    rbd snap create foo@snap
    rbd snap protect foo@snap
    rbd clone foo@snap bar
    # rbd_resize calls librbd rbd_resize(), size is in bytes
    ./rbd_resize bar $(((4 &lt;&lt; 20) + 512))
    rbd resize --size 10 bar
    BAR_DEV=$(rbd map bar)
    # trigger a 512-byte copyup -- 512-byte page array data item
    dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5

The problem exists only in ceph_msg_data_pages_cursor_init(),
ceph_msg_data_pages_advance() does the right thing.  The size_t cast is
unnecessary.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@redhat.com&gt;
Reviewed-by: Alex Elder &lt;elder@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: fix corruption when using page_count 0 page in rbd</title>
<updated>2014-06-07T17:28:28+00:00</updated>
<author>
<name>Chunwei Chen</name>
<email>tuxoko@gmail.com</email>
</author>
<published>2014-04-23T04:35:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bcd5faf938fb061c4c02874a906b68c5642822f3'/>
<id>bcd5faf938fb061c4c02874a906b68c5642822f3</id>
<content type='text'>
commit 178eda29ca721842f2146378e73d43e0044c4166 upstream.

It has been reported that using ZFSonLinux on rbd will result in memory
corruption. The bug report can be found here:

https://github.com/zfsonlinux/spl/issues/241
http://tracker.ceph.com/issues/7790

The reason is that ZFS will send pages with page_count 0 into rbd, which in
turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with
page_count 0, as it will do get_page and put_page, and erroneously free the
page.

This type of issue has been noted before, and handled in iscsi, drbd,
etc. So, rbd should also handle this. This fix address this issue by fall back
to slower sendmsg when page_count 0 detected.

Cc: Sage Weil &lt;sage@inktank.com&gt;
Cc: Yehuda Sadeh &lt;yehuda@inktank.com&gt;
Signed-off-by: Chunwei Chen &lt;tuxoko@gmail.com&gt;
Reviewed-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 178eda29ca721842f2146378e73d43e0044c4166 upstream.

It has been reported that using ZFSonLinux on rbd will result in memory
corruption. The bug report can be found here:

https://github.com/zfsonlinux/spl/issues/241
http://tracker.ceph.com/issues/7790

The reason is that ZFS will send pages with page_count 0 into rbd, which in
turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with
page_count 0, as it will do get_page and put_page, and erroneously free the
page.

This type of issue has been noted before, and handled in iscsi, drbd,
etc. So, rbd should also handle this. This fix address this issue by fall back
to slower sendmsg when page_count 0 detected.

Cc: Sage Weil &lt;sage@inktank.com&gt;
Cc: Yehuda Sadeh &lt;yehuda@inktank.com&gt;
Signed-off-by: Chunwei Chen &lt;tuxoko@gmail.com&gt;
Reviewed-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>crush: fix off-by-one errors in total_tries refactor</title>
<updated>2014-05-13T11:32:52+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-03-19T14:58:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e24b7822c7fea8d23d30baea8aabf96ec8522936'/>
<id>e24b7822c7fea8d23d30baea8aabf96ec8522936</id>
<content type='text'>
commit 48a163dbb517eba13643bf404a0d695c1ab0a60d upstream.

Back in 27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH
code to allow adjustment of the retry counts on a per-pool basis.  That
commit had an off-by-one bug: the previous "tries" counter was a *retry*
count, not a *try* count, but the new code was passing in 1 meaning
there should be no retries.

Fix the ftotal vs tries comparison to use &lt; instead of &lt;= to fix the
problem.  Note that the original code used &lt;= here, which means the
global "choose_total_tries" tunable is actually counting retries.
Compensate for that by adding 1 in crush_do_rule when we pull the tunable
into the local variable.

This was noticed looking at output from a user provided osdmap.
Unfortunately the map doesn't illustrate the change in mapping behavior
and I haven't managed to construct one yet that does.  Inspection of the
crush debug output now aligns with prior versions, though.

Reflects ceph.git commit 795704fd615f0b008dcc81aa088a859b2d075138.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Josh Durgin &lt;josh.durgin@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 48a163dbb517eba13643bf404a0d695c1ab0a60d upstream.

Back in 27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH
code to allow adjustment of the retry counts on a per-pool basis.  That
commit had an off-by-one bug: the previous "tries" counter was a *retry*
count, not a *try* count, but the new code was passing in 1 meaning
there should be no retries.

Fix the ftotal vs tries comparison to use &lt; instead of &lt;= to fix the
problem.  Note that the original code used &lt;= here, which means the
global "choose_total_tries" tunable is actually counting retries.
Compensate for that by adding 1 in crush_do_rule when we pull the tunable
into the local variable.

This was noticed looking at output from a user provided osdmap.
Unfortunately the map doesn't illustrate the change in mapping behavior
and I haven't managed to construct one yet that does.  Inspection of the
crush debug output now aligns with prior versions, though.

Reflects ceph.git commit 795704fd615f0b008dcc81aa088a859b2d075138.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Josh Durgin &lt;josh.durgin@inktank.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: do not dereference a NULL bio pointer</title>
<updated>2014-02-07T19:37:07+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-02-05T13:19:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0ec1d15ec6ed513ab2cc86c67d94761d71228a32'/>
<id>0ec1d15ec6ed513ab2cc86c67d94761d71228a32</id>
<content type='text'>
Commit f38a5181d9f3 ("ceph: Convert to immutable biovecs") introduced
a NULL pointer dereference, which broke rbd in -rc1.  Fix it.

Cc: Kent Overstreet &lt;kmo@daterainc.com&gt;
Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit f38a5181d9f3 ("ceph: Convert to immutable biovecs") introduced
a NULL pointer dereference, which broke rbd in -rc1.  Fix it.

Cc: Kent Overstreet &lt;kmo@daterainc.com&gt;
Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: take map_sem for read in handle_reply()</title>
<updated>2014-02-07T18:45:53+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-02-03T11:56:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ff513ace9b772e75e337f8e058cc7f12816843fe'/>
<id>ff513ace9b772e75e337f8e058cc7f12816843fe</id>
<content type='text'>
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case.  (Lock ordering is:
map_sem, request_mutex, crush_mutex.)

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case.  (Lock ordering is:
map_sem, request_mutex, crush_mutex.)

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: factor out logic from ceph_osdc_start_request()</title>
<updated>2014-02-07T18:45:42+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-01-31T17:33:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0bbfdfe8d25fcc1d5c2edb6b060fb0c5cf66aff9'/>
<id>0bbfdfe8d25fcc1d5c2edb6b060fb0c5cf66aff9</id>
<content type='text'>
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request().  ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request().  ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>libceph: fix error handling in ceph_osdc_init()</title>
<updated>2014-02-03T17:20:59+00:00</updated>
<author>
<name>Ilya Dryomov</name>
<email>ilya.dryomov@inktank.com</email>
</author>
<published>2014-01-31T15:49:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c172ec5c8dc8c09dd5958f4ae542fa321bb15a92'/>
<id>c172ec5c8dc8c09dd5958f4ae542fa321bb15a92</id>
<content type='text'>
msgpool_op_reply message pool isn't destroyed if workqueue construction
fails.  Fix it.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
msgpool_op_reply message pool isn't destroyed if workqueue construction
fails.  Fix it.

Signed-off-by: Ilya Dryomov &lt;ilya.dryomov@inktank.com&gt;
Reviewed-by: Sage Weil &lt;sage@inktank.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
