linux-stable.git/net/ceph/osdmap.c, branch v5.9

libceph: support for balanced and localized reads

2020-06-01T11:22:53+00:00

OSD-side issues with reads from replica have been resolved in
Octopus.  Reading from replica should be safe wrt. unstable or
uncommitted state now, so add support for balanced and localized
reads.

There are two cases when a read from replica can't be served:

- OSD may silently drop the request, expecting the client to
  notice that the acting set has changed and resend via the usual
  means (handled with t->used_replica)

- OSD may return EAGAIN, expecting the client to resend to the
  primary, ignoring replica read flags (see handle_reply())

Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton

libceph: crush_location infrastructure

2020-06-01T11:22:53+00:00

Allow expressing client's location in terms of CRUSH hierarchy as
a set of (bucket type name, bucket name) pairs.  The userspace syntax
"crush_location = key1=value1 key2=value2" is incompatible with mount
options and needed adaptation.  Key-value pairs are separated by '|'
and we use ':' instead of '=' to separate keys from values.  So for:

  crush_location = host=foo rack=bar

one would write:

  crush_location=host:foo|rack:bar

As in userspace, "multipath" locations are supported, so indicating
locality for parallel hierarchies is possible:

  crush_location=rack:foo1|rack:foo2|datacenter:bar

Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton

libceph: decode CRUSH device/bucket types and names

2020-06-01T11:22:53+00:00

These would be matched with the provided client location to calculate
the locality value.

Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton

libceph: add non-asserting rbtree insertion helper

2020-06-01T11:22:53+00:00

Needed for the next commit and useful for ceph_pg_pool_info tree as
well.  I'm leaving the asserting helper in for now, but we should look
at getting rid of it in the future.

Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton

ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL

2020-03-23T12:07:08+00:00

CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult
per-pool flags as well.  Unfortunately the backwards compatibility here
is lacking:

- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but
  was guarded by require_osd_release >= RELEASE_LUMINOUS
- it was subsequently backported to luminous in v12.2.2, but that makes
  no difference to clients that only check OSDMAP_FULL/NEARFULL because
  require_osd_release is not client-facing -- it is for OSDs

Since all kernels are affected, the best we can do here is just start
checking both map flags and pool flags and send that to stable.

These checks are best effort, so take osdc->lock and look up pool flags
just once.  Remove the FIXME, since filesystem quotas are checked above
and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches
its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.

Cc: stable@vger.kernel.org
Reported-by: Yanhu Cao 
Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton 
Acked-by: Sage Weil

libceph: use ceph_kvmalloc() for osdmap arrays

2019-09-16T10:06:25+00:00

osdmap has a bunch of arrays that grow linearly with the number of
OSDs.  osd_state, osd_weight and osd_primary_affinity take 4 bytes per
OSD.  osd_addr takes 136 bytes per OSD because of sockaddr_storage.
The CRUSH workspace area also grows linearly with the number of OSDs.

Normally these arrays are allocated at client startup.  The osdmap is
usually updated in small incrementals, but once in a while a full map
may need to be processed.  For a cluster with 10000 OSDs, this means
a bunch of 40K allocations followed by a 1.3M allocation, all of which
are currently required to be physically contiguous.  This results in
sporadic ENOMEM errors, hanging the client.

Go back to manually (re)allocating arrays and use ceph_kvmalloc() to
fall back to non-contiguous allocation when necessary.

Link: https://tracker.ceph.com/issues/40481
Signed-off-by: Ilya Dryomov 
Reviewed-by: Jeff Layton

libceph: correctly decode ADDR2 addresses in incremental OSD maps

2019-07-08T12:01:43+00:00

Given the new format, we have to decode the addresses twice. Once to
skip past the new_up_client field, and a second time to collect the
addresses.

Signed-off-by: Jeff Layton 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

libceph: switch osdmap decoding to use ceph_decode_entity_addr

2019-07-08T12:01:43+00:00

Signed-off-by: Jeff Layton 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

libceph: use struct_size() for kmalloc() in crush_decode()

2019-03-05T17:55:17+00:00

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov

Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client

2018-06-14T22:24:58+00:00

Pull ceph updates from Ilya Dryomov:
 "The main piece is a set of libceph changes that revamps how OSD
  requests are aborted, improving CephFS ENOSPC handling and making
  "umount -f" actually work (Zheng and myself).

  The rest is mostly mount option handling cleanups from Chengguang and
  assorted fixes from Zheng, Luis and Dongsheng.

* tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  rbd: flush rbd_dev->watch_dwork after watch is unregistered
  ceph: update description of some mount options
  ceph: show ino32 if the value is different with default
  ceph: strengthen rsize/wsize/readdir_max_bytes validation
  ceph: fix alignment of rasize
  ceph: fix use-after-free in ceph_statfs()
  ceph: prevent i_version from going back
  ceph: fix wrong check for the case of updating link count
  libceph: allocate the locator string with GFP_NOFAIL
  libceph: make abort_on_full a per-osdc setting
  libceph: don't abort reads in ceph_osdc_abort_on_full()
  libceph: avoid a use-after-free during map check
  libceph: don't warn if req->r_abort_on_full is set
  libceph: use for_each_request() in ceph_osdc_abort_on_full()
  libceph: defer __complete_request() to a workqueue
  libceph: move more code into __complete_request()
  libceph: no need to call flush_workqueue() before destruction
  ceph: flush pending works before shutdown super
  ceph: abort osd requests on force umount
  libceph: introduce ceph_osdc_abort_requests()
  ...