linux-stable.git/net/can, branch v5.4.78

can: j1939: j1939_sk_bind(): return failure if netdev is down

2020-11-18T18:20:19+00:00

[ Upstream commit 08c487d8d807535f509ed80c6a10ad90e6872139 ]

When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.

But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.

To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120 1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever

This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcnt

2020-10-29T08:57:24+00:00

[ Upstream commit 13ba4c434422837d7c8c163f9c8d854e67bf3c99 ]

This patch add the initialization of skbcnt, similar to:

    e009f95b1543 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt

Let's play save and initialize this skbcnt as well.

Suggested-by: Jakub Kicinski 
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt

2020-10-29T08:57:24+00:00

[ Upstream commit e009f95b1543e26606dca2f7e6e9f0f9174538e5 ]

This fixes an uninit-value warning:
BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650

Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: Robin van der Gracht 
Cc: Oleksij Rempel 
Cc: Pengutronix Kernel Team 
Cc: Oliver Hartkopp 
Cc: Marc Kleine-Budde 
Signed-off-by: Cong Wang 
Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions

2020-09-03T09:26:58+00:00

[ Upstream commit e052d0540298bfe0f6cbbecdc7e2ea9b859575b2 ]

Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.

At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.

With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.

Signed-off-by: Oleksij Rempel 
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: add rxtimer for multipacket broadcast session

2020-08-26T08:41:02+00:00

[ Upstream commit 0ae18a82686f9b9965a8ce0dd81371871b306ffe ]

According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.

So this patch fix and add rxtimer for multipacket broadcast session.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: abort multipacket broadcast session when timeout occurs

2020-08-26T08:41:02+00:00

[ Upstream commit 2b8b2e31555cf55ba3680fb28e2b382e168d7ea1 ]

If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.

But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.

So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: cancel rxtimer on multipacket broadcast session complete

2020-08-26T08:41:01+00:00

[ Upstream commit e8b17653088f28a87c81845fa41a2d295a3b458c ]

If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: fix support for multipacket broadcast message

2020-08-26T08:41:01+00:00

[ Upstream commit f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade ]

Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.

So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong 
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: transport: add j1939_session_skb_find_by_offset() function

2020-08-26T08:41:00+00:00

[ Upstream commit 840835c9281215341d84966a8855f267a971e6a3 ]

Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.

After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.

Reported-by: Henrique Figueira 
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel 
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack

2020-08-26T08:41:00+00:00

[ Upstream commit b43e3a82bc432c1caaed8950e7662c143470c54c ]

In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.

To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123

This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message

With this patch we add additional check to make sure, related skb is own
echo message.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel 
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin