linux-stable.git/net/bridge, branch v6.0

netfilter: ebtables: fix memory leak when blob is malformed

2022-09-20T21:50:03+00:00

The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.

Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points")
Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal

netfilter: br_netfilter: Drop dst references before setting.

2022-08-31T10:12:32+00:00

The IPv6 path already drops dst in the daddr changed case, but the IPv4
path does not. This change makes the two code paths consistent.

Further, it is possible that there is already a metadata_dst allocated from
ingress that might already be attached to skbuff->dst while following
the bridge path. If it is not released before setting a new
metadata_dst, it will be leaked. This is similar to what is done in
bpf_set_tunnel_key() or ip6_route_input().

It is important to note that the memory being leaked is not the dst
being set in the bridge code, but rather memory allocated from some
other code path that is not being freed correctly before the skb dst is
overwritten.

An example of the leakage fixed by this commit found using kmemleak:

unreferenced object 0xffff888010112b00 (size 256):
  comm "softirq", pid 0, jiffies 4294762496 (age 32.012s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff  ................
    e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00  .N..............
  backtrace:
    [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0
    [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0
    [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0
    [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560
    [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90
    [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230
    [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0
    [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0
    [<00000000a879497d>] process_backlog+0x93/0x190
    [<00000000e41ade9f>] __napi_poll+0x28/0x170
    [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0
    [<00000000b20dd5d4>] __do_softirq+0xf4/0x305
    [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140
    [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0
    [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20
    [<000000008942add0>] native_safe_halt+0x13/0x20

Florian Westphal says: "Original code was likely fine because nothing
ever did set a skb->dst entry earlier than bridge in those days."

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Harsh Modi 
Acked-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

netfilter: ebtables: reject blobs that don't provide all entry points

2022-08-23T16:23:15+00:00

Harshit Mogalapalli says:
 In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
 can lead to NULL pointer dereference. [..] Kernel panic:

general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[..]
RIP: 0010:ebt_do_table+0x1dc/0x1ce0
Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88
[..]
Call Trace:
 nf_hook_slow+0xb1/0x170
 __br_forward+0x289/0x730
 maybe_deliver+0x24b/0x380
 br_flood+0xc6/0x390
 br_dev_xmit+0xa2e/0x12c0

For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.

t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets.  Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.

Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Harshit Mogalapalli 
Reported-by: syzkaller 
Signed-off-by: Florian Westphal

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-07-29T01:21:16+00:00

No conflicts.

Signed-off-by: Jakub Kicinski

bridge: Do not send empty IFLA_AF_SPEC attribute

2022-07-26T13:35:53+00:00

After commit b6c02ef54913 ("bridge: Netlink interface fix."),
br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a
bridge vlan dump is requested but an interface does not have any vlans
configured.

iproute2 ignores such an empty attribute since commit b262a9becbcb
("bridge: Fix output with empty vlan lists") but older iproute2 versions as
well as other utilities have their output changed by the cited kernel
commit, resulting in failed test cases. Regardless, emitting an empty
attribute is pointless and inefficient.

Avoid this change by canceling the attribute if no AF_SPEC data was added.

Fixes: b6c02ef54913 ("bridge: Netlink interface fix.")
Reviewed-by: Ido Schimmel 
Signed-off-by: Benjamin Poirier 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni

netfilter: nf_tables: add and use BE register load-store helpers

2022-07-11T14:40:46+00:00

Same as the existing ones, no conversions. This is just for sparse sake
only so that we no longer mix be16/u16 and be32/u32 types.

Alternative is to add __force __beX in various places, but this
seems nicer.

objdiff shows no changes.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-06-30T23:31:00+00:00

drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
  9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices")
  fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports")

Signed-off-by: Jakub Kicinski

netfilter: br_netfilter: do not skip all hooks with 0 priority

2022-06-27T17:23:27+00:00

When br_netfilter module is loaded, skbs may be diverted to the
ipv4/ipv6 hooks, just like as if we were routing.

Unfortunately, bridge filter hooks with priority 0 may be skipped
in this case.

Example:
1. an nftables bridge ruleset is loaded, with a prerouting
   hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.

After 1) the only registered hook is the bridge prerouting hook, but its
not called yet because the bridge hasn't been brought up yet.

After 2), hook order is:
   0 br_nf_pre_routing // br_netfilter internal hook
   0 chain bridge f prerouting // nftables bridge ruleset

The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.

But if its enabled, br_nf_hook_thresh() will skip it because it assumes
that all 0-priority hooks had been called previously in bridge context.

To avoid this, check for the br_nf_pre_routing hook itself, we need to
resume directly after it, even if this hook has a priority of 0.

Unfortunately, this still results in different packet flow.
With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge

but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)

Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority
so that it will be called later in the pipeline, but this also impacts
ebtables evaluation order, and would still result in this very ordering
problem for all nftables-bridge hooks with the same priority as the
br_nf_pre_routing one.

Searching back through the git history I don't think this has
ever behaved in any other way, hence, no fixes-tag.

Reported-by: Radim Hrazdil 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

net: bridge: allow add/remove permanent mdb entries on disabled ports

2022-06-15T08:35:21+00:00

Adding mdb entries on disabled ports allows you to do setup before
accepting any traffic, avoiding any time where the port is not in the
multicast group.

Signed-off-by: Casper Andersson 
Acked-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

net: adopt u64_stats_t in struct pcpu_sw_netstats

2022-06-10T04:53:11+00:00

As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.

Signed-off-by: Eric Dumazet 
Signed-off-by: Jakub Kicinski