linux-stable.git/net/bridge, branch v5.2.8

net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER

2019-08-09T15:51:44+00:00

[ Upstream commit 091adf9ba6cdb432cbcc217b47e4ffb8aa0d8865 ]

Most of the bridge device's vlan init bugs come from the fact that its
default pvid is created at the wrong time, way too early in ndo_init()
before the device is even assigned an ifindex. It introduces a bug when the
bridge's dev_addr is added as fdb during the initial default pvid creation
the notification has ifindex/NDA_MASTER both equal to 0 (see example below)
which really makes no sense for user-space[0] and is wrong.
Usually user-space software would ignore such entries, but they are
actually valid and will eventually have all necessary attributes.
It makes much more sense to send a notification *after* the device has
registered and has a proper ifindex allocated rather than before when
there's a chance that the registration might still fail or to receive
it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush
from br_vlan_flush() since that case can no longer happen. At
NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by
br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything
depending why it was called (if called due to NETDEV_REGISTER error
it'll still be == 1, otherwise it could be any value changed during the
device life time).

For the demonstration below a small change to iproute2 for printing all fdb
notifications is added, because it contained a workaround not to show
entries with ifindex == 0.
Command executed while monitoring: $ ip l add br0 type bridge
Before (both ifindex and master == 0):
$ bridge monitor fdb
36:7e:8a:b3:56:ba dev * vlan 1 master * permanent

After (proper br0 ifindex):
$ bridge monitor fdb
e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent

v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
v3: send the correct v2 patch with all changes (stub should return 0)
v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in
    the br_vlan_bridge_event stub when bridge vlans are disabled

[0] https://bugzilla.kernel.org/show_bug.cgi?id=204389

Reported-by: michael-dev 
Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid")
Signed-off-by: Nikolay Aleksandrov 
Acked-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: mcast: don't delete permanent entries when fast leave is enabled

2019-08-09T15:51:43+00:00

[ Upstream commit 5c725b6b65067909548ac9ca9bc777098ec9883d ]

When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.

Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
$

After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: delete local fdb on device init failure

2019-08-09T15:51:43+00:00

[ Upstream commit d7bae09fa008c6c9a489580db0a5a12063b97f97 ]

On initialization failure we have to delete the local fdb which was
inserted due to the default pvid creation. This problem has been present
since the inception of default_pvid. Note that currently there are 2 cases:
1) in br_dev_init() when br_multicast_init() fails
2) if register_netdevice() fails after calling ndo_init()

This patch takes care of both since br_vlan_flush() is called on both
occasions. Also the new fdb delete would be a no-op on normal bridge
device destruction since the local fdb would've been already flushed by
br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is
called last when adding a port thus nothing can fail after it.

Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com
Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: stp: don't cache eth dest pointer before skb pull

2019-07-28T06:27:18+00:00

[ Upstream commit 2446a68ae6a8cee6d480e2f5b52f5007c7c41312 ]

Don't cache eth dest pointer before calling pskb_may_pull.

Fixes: cf0f02d04a83 ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: don't cache ether dest pointer on input

2019-07-28T06:27:17+00:00

[ Upstream commit 3d26eb8ad1e9b906433903ce05f775cf038e747f ]

We would cache ether dst pointer on input in br_handle_frame_finish but
after the neigh suppress code that could lead to a stale pointer since
both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to
always reload it after the suppress code so there's no point in having
it cached just retrieve it directly.

Fixes: 057658cb33fbf ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: mcast: fix stale ipv6 hdr pointer when handling v6 query

2019-07-28T06:27:17+00:00

[ Upstream commit 3b26a5d03d35d8f732d75951218983c0f7f68dff ]

We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.

Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: Nikolay Aleksandrov 
Tested-by: Martin Weinelt 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling

2019-07-28T06:27:17+00:00

[ Upstream commit e57f61858b7cf478ed6fa23ed4b3876b1c9625c4 ]

We take a pointer to grec prior to calling pskb_may_pull and use it
afterwards to get nsrcs so record nsrcs before the pull when handling
igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling
mld2 which again could lead to reading 2 bytes out-of-bounds.

 ==================================================================
 BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge]
 Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16

 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G           OE     5.2.0-rc6+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x71/0xab
  print_address_description+0x6a/0x280
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  __kasan_report+0x152/0x1aa
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  kasan_report+0xe/0x20
  br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_disable_port+0x150/0x150 [bridge]
  ? ktime_get_with_offset+0xb4/0x150
  ? __kasan_kmalloc.constprop.6+0xa6/0xf0
  ? __netif_receive_skb+0x1b0/0x1b0
  ? br_fdb_update+0x10e/0x6e0 [bridge]
  ? br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  ? br_pass_frame_up+0x3a0/0x3a0 [bridge]
  ? virtnet_probe+0x1c80/0x1c80 [virtio_net]
  br_handle_frame+0x731/0xd90 [bridge]
  ? select_idle_sibling+0x25/0x7d0
  ? br_handle_frame_finish+0x11d0/0x11d0 [bridge]
  __netif_receive_skb_core+0xced/0x2d70
  ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring]
  ? do_xdp_generic+0x20/0x20
  ? virtqueue_napi_complete+0x39/0x70 [virtio_net]
  ? virtnet_poll+0x94d/0xc78 [virtio_net]
  ? receive_buf+0x5120/0x5120 [virtio_net]
  ? __netif_receive_skb_one_core+0x97/0x1d0
  __netif_receive_skb_one_core+0x97/0x1d0
  ? __netif_receive_skb_core+0x2d70/0x2d70
  ? _raw_write_trylock+0x100/0x100
  ? __queue_work+0x41e/0xbe0
  process_backlog+0x19c/0x650
  ? _raw_read_lock_irq+0x40/0x40
  net_rx_action+0x71e/0xbc0
  ? __switch_to_asm+0x40/0x70
  ? napi_complete_done+0x360/0x360
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __schedule+0x85e/0x14d0
  __do_softirq+0x1db/0x5f9
  ? takeover_tasklets+0x5f0/0x5f0
  run_ksoftirqd+0x26/0x40
  smpboot_thread_fn+0x443/0x680
  ? sort_range+0x20/0x20
  ? schedule+0x94/0x210
  ? __kthread_parkme+0x78/0xf0
  ? sort_range+0x20/0x20
  kthread+0x2ae/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x35/0x40

 The buggy address belongs to the page:
 page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
 flags: 0xffffc000000000()
 raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000
 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
 ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                     ^
 ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ==================================================================
 Disabling lock debugging due to kernel taint

Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Reported-by: Martin Weinelt 
Signed-off-by: Nikolay Aleksandrov 
Tested-by: Martin Weinelt 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

2019-05-21T09:28:45+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Jilayne Lovejoy 
Reviewed-by: Steve Winslow 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman