linux-stable.git/net/bridge, branch v3.14.8

bridge: Handle IFLA_ADDRESS correctly when creating bridge device

2014-05-31T20:20:35+00:00

[ Upstream commit 30313a3d5794472c3548d7288e306a5492030370 ]

When bridge device is created with IFLA_ADDRESS, we are not calling
br_stp_change_bridge_id(), which leads to incorrect local fdb
management and bridge id calculation, and prevents us from receiving
frames on the bridge device.

Reported-by: Tom Gundersen 
Signed-off-by: Toshiaki Makita 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bridge: Fix double free and memory leak around br_allowed_ingress

2014-05-31T20:20:33+00:00

[ Upstream commit eb7076182d1ae4bc4641534134ed707100d76acc ]

br_allowed_ingress() has two problems.

1. If br_allowed_ingress() is called by br_handle_frame_finish() and
vlan_untag() in br_allowed_ingress() fails, skb will be freed by both
vlan_untag() and br_handle_frame_finish().

2. If br_allowed_ingress() is called by br_dev_xmit() and
br_allowed_ingress() fails, the skb will not be freed.

Fix these two problems by freeing the skb in br_allowed_ingress()
if it fails.

Signed-off-by: Toshiaki Makita 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

netfilter: Can't fail and free after table replacement

2014-05-31T20:20:28+00:00

commit c58dd2dd443c26d856a168db108a0cd11c285bf3 upstream.

All xtables variants suffer from the defect that the copy_to_user()
to copy the counters to user memory may fail after the table has
already been exchanged and thus exposed. Return an error at this
point will result in freeing the already exposed table. Any
subsequent packet processing will result in a kernel panic.

We can't copy the counters before exposing the new tables as we
want provide the counter state after the old table has been
unhooked. Therefore convert this into a silent error.

Cc: Florian Westphal 
Signed-off-by: Thomas Graf 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

bridge: Fix crash with vlan filtering and tcpdump

2014-03-28T21:14:02+00:00

When the vlan filtering is enabled on the bridge, but
the filter is not configured on the bridge device itself,
running tcpdump on the bridge device will result in a
an Oops with NULL pointer dereference.  The reason
is that br_pass_frame_up() will bypass the vlan
check because promisc flag is set.  It will then try
to get the table pointer and process the packet based
on the table.  Since the table pointer is NULL, we oops.
Catch this special condition in br_handle_vlan().

Reported-by: Toshiaki Makita 
CC: Toshiaki Makita 
Signed-off-by: Vlad Yasevich 
Acked-by: Toshiaki Makita 
Signed-off-by: David S. Miller

bridge: Fix handling stacked vlan tags

2014-03-28T20:33:09+00:00

If a bridge with vlan_filtering enabled receives frames with stacked
vlan tags, i.e., they have two vlan tags, br_vlan_untag() strips not
only the outer tag but also the inner tag.

br_vlan_untag() is called only from br_handle_vlan(), and in this case,
it is enough to set skb->vlan_tci to 0 here, because vlan_tci has already
been set before calling br_handle_vlan().

Signed-off-by: Toshiaki Makita 
Acked-by: Vlad Yasevich 
Signed-off-by: David S. Miller

bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled

2014-03-28T20:33:09+00:00

Bridge vlan code (br_vlan_get_tag()) assumes that all frames have vlan_tci
if they are tagged, but if vlan tx offload is manually disabled on bridge
device and frames are sent from vlan device on the bridge device, the tags
are embedded in skb->data and they break this assumption.
Extract embedded vlan tags and move them to vlan_tci at ingress.

Signed-off-by: Toshiaki Makita 
Acked-by: Vlad Yasevich 
Signed-off-by: David S. Miller

bridge: multicast: enable snooping on general queries only

2014-03-12T03:22:10+00:00

Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.

With this patch the snooping code is enabled upon receiving valid,
general queries only.

Signed-off-by: Linus Lüssing 
Signed-off-by: David S. Miller

bridge: multicast: add sanity check for general query destination

2014-03-12T03:22:10+00:00

General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.

Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.

Reported-by: Jan Stancek 
Signed-off-by: Linus Lüssing 
Signed-off-by: David S. Miller

bridge: multicast: add sanity check for query source addresses

2014-03-06T01:40:24+00:00

MLD queries are supposed to have an IPv6 link-local source address
according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch
adds a sanity check to ignore such broken MLD queries.

Without this check, such malformed MLD queries can result in a
denial of service: The queries are ignored by any MLD listener
therefore they will not respond with an MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.

Reported-by: Jan Stancek 
Signed-off-by: Linus Lüssing 
Reviewed-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

bridge: Prevent possible race condition in br_fdb_change_mac_address

2014-02-10T22:34:34+00:00

br_fdb_change_mac_address() calls fdb_insert()/fdb_delete() without
br->hash_lock.

These hash list updates are racy with br_fdb_update()/br_fdb_cleanup().

Signed-off-by: Toshiaki Makita 
Acked-by: Vlad Yasevich 
Signed-off-by: David S. Miller