[ Upstream commit 683dc24da8bf199bb7446e445ad7f801c79a550e ]

Do not offload IGMP/MLD messages as it could lead to IGMP/MLD Reports
being unintentionally flooded to Hosts. Instead, let the bridge decide
where to send these IGMP/MLD messages.

Consider the case where the local host is sending out reports in response
to a remote querier like the following:

       mcast-listener-process (IP_ADD_MEMBERSHIP)
          \
          br0
         /   \
      swp1   swp2
        |     |
  QUERIER     SOME-OTHER-HOST

In the above setup, br0 will want to br_forward() reports for
mcast-listener-process's group(s) via swp1 to QUERIER; but since the
source hwdom is 0, the report is eligible for tx offloading, and is
flooded by hardware to both swp1 and swp2, reaching SOME-OTHER-HOST as
well. (Example and illustration provided by Tobias.)

Fixes: 472111920f1c ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250716153551.1830255-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7544f3f5b0b58c396f374d060898b5939da31709 ]

The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.

When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:

 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
 # ip link add name dummy1 up master br1 type dummy
 # ip link set dev dummy1 type bridge_slave mcast_router 2
 $ bridge -d mdb show | grep router
 router ports on br1: dummy1
 # ip link set dev br1 type bridge mcast_vlan_snooping 1
 $ bridge -d mdb show | grep router

However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:

 # ip link set dev dummy1 type bridge_slave mcast_router 0
 # ip link set dev dummy1 type bridge_slave mcast_router 2
 $ bridge -d mdb show | grep router
 router ports on br1: dummy1

Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):

 # ip link del dev dummy1
 # ip link add name dummy2 up master br1 type dummy
 # ip link set dev dummy2 type bridge_slave mcast_router 2

Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:

 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
 # ip link add name dummy1 up master br1 type dummy
 # bridge vlan add vid 2 dev dummy1
 # bridge vlan global set vid 2 dev br1 mcast_snooping 1
 # bridge vlan set vid 2 dev dummy1 mcast_router 2
 $ bridge vlan global show dev br1 vid 2 | grep router
       router ports: dummy1
 # ip link set dev br1 type bridge mcast_vlan_snooping 0
 $ bridge vlan global show dev br1 vid 2 | grep router

However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:

 # bridge vlan set vid 2 dev dummy1 mcast_router 0
 # bridge vlan set vid 2 dev dummy1 mcast_router 2
 $ bridge vlan global show dev br1 vid 2 | grep router
       router ports: dummy1

When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):

 # ip link add name dummy2 up master br1 type dummy
 # bridge vlan add vid 2 dev dummy2
 # bridge vlan del vid 2 dev dummy1
 # bridge vlan set vid 2 dev dummy2 mcast_router 2

Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.

Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).

[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
 <TASK>
 dump_stack_lvl+0x6f/0xa0
 print_address_description.constprop.0+0x6f/0x350
 print_report+0x108/0x205
 kasan_report+0xdf/0x110
 br_multicast_add_router.part.0+0x3f1/0x560
 br_multicast_set_port_router+0x74e/0xac0
 br_setport+0xa55/0x1870
 br_port_slave_changelink+0x95/0x120
 __rtnl_newlink+0x5e8/0xa40
 rtnl_newlink+0x627/0xb00
 rtnetlink_rcv_msg+0x6fb/0xb70
 netlink_rcv_skb+0x11f/0x350
 netlink_unicast+0x426/0x710
 netlink_sendmsg+0x75a/0xc20
 __sock_sendmsg+0xc1/0x150
 ____sys_sendmsg+0x5aa/0x7b0
 ___sys_sendmsg+0xfc/0x180
 __sys_sendmsg+0x124/0x1c0
 do_syscall_64+0xbb/0x360
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
 <TASK>
 dump_stack_lvl+0x6f/0xa0
 print_address_description.constprop.0+0x6f/0x350
 print_report+0x108/0x205
 kasan_report+0xdf/0x110
 br_multicast_add_router.part.0+0x378/0x560
 br_multicast_set_port_router+0x6f9/0xac0
 br_vlan_process_options+0x8b6/0x1430
 br_vlan_rtm_process_one+0x605/0xa30
 br_vlan_rtm_process+0x396/0x4c0
 rtnetlink_rcv_msg+0x2f7/0xb70
 netlink_rcv_skb+0x11f/0x350
 netlink_unicast+0x426/0x710
 netlink_sendmsg+0x75a/0xc20
 __sock_sendmsg+0xc1/0x150
 ____sys_sendmsg+0x5aa/0x7b0
 ___sys_sendmsg+0xfc/0x180
 __sys_sendmsg+0x124/0x1c0
 do_syscall_64+0xbb/0x360
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fixes: 2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4b30ae9adb047dd0a7982975ec3933c529537026 ]

When a bridge port STP state is changed from BLOCKING/DISABLED to
FORWARDING, the port's igmp query timer will NOT re-arm itself if the
bridge has been configured as per-VLAN multicast snooping.

Solve this by choosing the correct multicast context(s) to enable/disable
port multicast based on whether per-VLAN multicast snooping is enabled or
not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast
snooping by re-implementing br_multicast_enable_port() and
br_multicast_disable_port() functions.

Before the patch, the IGMP query does not happen in the last step of the
following test sequence, i.e. no growth for tx counter:
 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
 # ip link add name swp1 up master br1 type dummy
 # bridge link set dev swp1 state 0
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # sleep 1
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # bridge link set dev swp1 state 3
 # sleep 2
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1

After the patch, the IGMP query happens in the last step of the test:
 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
 # ip link add name swp1 up master br1 type dummy
 # bridge link set dev swp1 state 0
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # sleep 1
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # bridge link set dev swp1 state 3
 # sleep 2
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
3

Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6c131043eaf1be2a6cc2d228f92ceb626fbcc0f3 ]

When the vlan STP state is changed, which could be manipulated by
"bridge vlan" commands, similar to port STP state, this also impacts
multicast behaviors such as igmp query. In the scenario of per-VLAN
snooping, there's a need to update the corresponding multicast context
to re-arm the port query timer when vlan state becomes "forwarding" etc.

Update br_vlan_set_state() function to enable vlan multicast context
in such scenario.

Before the patch, the IGMP query does not happen in the last step of the
following test sequence, i.e. no growth for tx counter:
 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
 # ip link add name swp1 up master br1 type dummy
 # sleep 1
 # bridge vlan set vid 1 dev swp1 state 4
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # sleep 1
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # bridge vlan set vid 1 dev swp1 state 3
 # sleep 2
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1

After the patch, the IGMP query happens in the last step of the test:
 # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
 # ip link add name swp1 up master br1 type dummy
 # sleep 1
 # bridge vlan set vid 1 dev swp1 state 4
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # sleep 1
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
 # bridge vlan set vid 1 dev swp1 state 3
 # sleep 2
 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
3

Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit aa04c6f45b9224b949aa35d4fa5f8d0ba07b23d4 ]

The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.

The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.

In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.

Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: Huajian Yang <huajianyang@asrmicro.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

When netfilter defrag hooks are loaded (due to the presence of conntrack
rules, for example), fragmented packets entering the bridge will be
defragged by the bridge's pre-routing hook (br_nf_pre_routing() ->
ipv4_conntrack_defrag()).

Later on, in the bridge's post-routing hook, the defragged packet will
be fragmented again. If the size of the largest fragment is larger than
what the kernel has determined as the destination MTU (using
ip_skb_dst_mtu()), the defragged packet will be dropped.

Before commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and
ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as
the destination MTU. Assuming the dst entry attached to the packet is
the bridge's fake rtable one, this would simply be the bridge's MTU (see
fake_mtu()).

However, after above mentioned commit, ip_skb_dst_mtu() ends up
returning the route's MTU stored in the dst entry's metrics. Ideally, in
case the dst entry is the bridge's fake rtable one, this should be the
bridge's MTU as the bridge takes care of updating this metric when its
MTU changes (see br_change_mtu()).

Unfortunately, the last operation is a no-op given the metrics attached
to the fake rtable entry are marked as read-only. Therefore,
ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and
defragged packets are dropped during fragmentation when dealing with
large fragments and high MTU (e.g., 9k).

Fix by moving the fake rtable entry's metrics to be per-bridge (in a
similar fashion to the fake rtable entry itself) and marking them as
writable, thereby allowing MTU changes to be reflected.

Fixes: 62fa8a846d7d ("net: Implement read-only protection and COW'ing of metrics.")
Fixes: 33eb9873a283 ("bridge: initialize fake_rtable metrics")
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/
Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250515084848.727706-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When adding a bridge vlan that is pvid or untagged after the vlan has
already been added to any other switchdev backed port, the vlan change
will be propagated as changed, since the flags change.

This causes the vlan to not be added to the hardware for DSA switches,
since the DSA handler ignores any vlans for the CPU or DSA ports that
are changed.

E.g. the following order of operations would work:

$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev swbridge vid 1 pvid untagged self
$ bridge vlan add dev lan1 vid 1 pvid untagged

but this order would break:

$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev lan1 vid 1 pvid untagged
$ bridge vlan add dev swbridge vid 1 pvid untagged self

Additionally, the vlan on the bridge itself would become undeletable:

$ bridge vlan
port              vlan-id
lan1              1 PVID Egress Untagged
swbridge          1 PVID Egress Untagged
$ bridge vlan del dev swbridge vid 1 self
$ bridge vlan
port              vlan-id
lan1              1 PVID Egress Untagged
swbridge          1 Egress Untagged

since the vlan was never added to DSA's vlan list, so deleting it will
cause an error, causing the bridge code to not remove it.

Fix this by checking if flags changed only for vlans that are already
brentry and pass changed as false for those that become brentries, as
these are a new vlan (member) from the switchdev point of view.

Since *changed is set to true for becomes_brentry = true regardless of
would_change's value, this will not change any rtnetlink notification
delivery, just the value passed on to switchdev in vlan->changed.

Fixes: 8d23a54f5bee ("net: bridge: switchdev: differentiate new VLANs from changed ones")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250414200020.192715-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge in late fixes to prepare for the 6.15 net-next PR.

No conflicts, adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
  fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.

Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.

In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.

In the race window, Thread B could acquire RTNL and try to remove
the bridge device.  Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.

Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.

  Thread A (SIOCBRDELIF)           Thread B (SIOCBRDELBR)
  ----------------------           ----------------------
  sock_ioctl                       sock_ioctl
  `- sock_do_ioctl                 `- br_ioctl_call
     `- dev_ioctl                     `- br_ioctl_stub
        |- rtnl_lock                     |
        |- dev_ifsioc                    '
        '  |- dev = __dev_get_by_name(...)
           |- netdev_hold(dev, ...)      .
       /   |- rtnl_unlock  ------.       |
       |   |- br_ioctl_call       `--->  |- rtnl_lock
  Race |   |  `- br_ioctl_stub           |- br_del_bridge
  Window   |     |                       |  |- dev = __dev_get_by_name(...)
       |   |     |  May take long        |  `- br_dev_delete(dev, ...)
       |   |     |  under RTNL pressure  |     `- unregister_netdevice_queue(dev, ...)
       |   |     |               |       `- rtnl_unlock
       \   |     |- rtnl_lock  <-'          `- netdev_run_todo
           |     |- ...                        `- netdev_run_todo
           |     `- rtnl_unlock                   |- __rtnl_unlock
           |                                      |- netdev_wait_allrefs_any
           |- netdev_put(dev, ...)  <----------------'
                                                Wait refcnt decrement
                                                and log splat below

To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.

In the dev_ioctl() path, we do the following:

  1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
  2. Check CAP_NET_ADMIN in dev_ioctl()
  3. Call dev_load() in dev_ioctl()
  4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()

3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().

Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.

SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.

[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
     __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
     netdev_hold include/linux/netdevice.h:4311 [inline]
     dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
     dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
     sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
     sock_ioctl+0x23a/0x6c0 net/socket.c:1318
     vfs_ioctl fs/ioctl.c:51 [inline]
     __do_sys_ioctl fs/ioctl.c:906 [inline]
     __se_sys_ioctl fs/ioctl.c:892 [inline]
     __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
     do_syscall_x64 arch/x86/entry/common.c:52 [inline]
     do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
     entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 893b19587534 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>