linux-stable.git/net/bridge, branch linux-5.11.y Linux kernel stable tree net: bridge: when suppression is enabled exclude RARP packets 2021-05-19T08:29:29+00:00 Nikolay Aleksandrov nikolay@nvidia.com 2021-03-22T15:45:27+00:00 e4c2365d41bdd867c069e4f6e19206eaa91c0633 [ Upstream commit 0353b4a96b7a9f60fe20d1b3ebd4931a4085f91c ] Recently we had an interop issue where RARP packets got suppressed with bridge neigh suppression enabled, but the check in the code was meant to suppress GARP. Exclude RARP packets from it which would allow some VMWare setups to work, to quote the report: "Those RARP packets usually get generated by vMware to notify physical switches when vMotion occurs. vMware may use random sip/tip or just use sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep and other times get dropped by the logic" Reported-by: Amer Abdalamer <amer@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0353b4a96b7a9f60fe20d1b3ebd4931a4085f91c ]

Recently we had an interop issue where RARP packets got suppressed with
bridge neigh suppression enabled, but the check in the code was meant to
suppress GARP. Exclude RARP packets from it which would allow some VMWare
setups to work, to quote the report:
"Those RARP packets usually get generated by vMware to notify physical
switches when vMotion occurs. vMware may use random sip/tip or just use
sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep
and other times get dropped by the logic"

Reported-by: Amer Abdalamer <amer@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. 2021-05-14T08:50:18+00:00 Linus Lüssing linus.luessing@c0d3.blue 2021-04-25T15:27:35+00:00 9125bd57350b46a082f3f27b0d29ef7cc5ec0cf9 [ Upstream commit 99014088156cd78867d19514a0bc771c4b86b93b ] The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99014088156cd78867d19514a0bc771c4b86b93b ]

The IPv6 Multicast Router Advertisements parsing has the following two
issues:

For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.

The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.

To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.

These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).

Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: bridge: add pre_exit hooks for ebtable unregistration 2021-04-21T11:13:24+00:00 Florian Westphal fw@strlen.de 2021-04-07T19:43:39+00:00 f4e3e823b19785425ae550b5034a306d60d6c8f9 commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream. Just like ip/ip6/arptables, the hooks have to be removed, then synchronize_rcu() has to be called to make sure no more packets are being processed before the ruleset data is released. Place the hook unregistration in the pre_exit hook, then call the new ebtables pre_exit function from there. Years ago, when first netns support got added for netfilter+ebtables, this used an older (now removed) netfilter hook unregister API, that did a unconditional synchronize_rcu(). Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit handlers may free the ebtable ruleset while packets are still in flight. This can only happens on module removal, not during netns exit. The new function expects the table name, not the table struct. This is because upcoming patch set (targeting -next) will remove all net->xt.{nat,filter,broute}_table instances, this makes it necessary to avoid external references to those member variables. The existing APIs will be converted, so follow the upcoming scheme of passing name + hook type instead. Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream.

Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.

Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.

Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().

Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.

This can only happens on module removal, not during netns exit.

The new function expects the table name, not the table struct.

This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.

The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.

Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: bridge: don't notify switchdev for local FDB addresses 2021-03-30T12:30:26+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-03-22T18:21:08+00:00 458ce1e66cee7a9e9f6eb4066ad7616cd86ae8a0 [ Upstream commit 6ab4c3117aec4e08007d9e971fa4133e1de1082d ] As explained in this discussion: https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/ the switchdev notifiers for FDB entries managed to have a zero-day bug. The bridge would not say that this entry is local: ip link add br0 type bridge ip link set swp0 master br0 bridge fdb add dev swp0 00:01:02:03:04:05 master local and the switchdev driver would be more than happy to offload it as a normal static FDB entry. This is despite the fact that 'local' and non-'local' entries have completely opposite directions: a local entry is locally terminated and not forwarded, whereas a static entry is forwarded and not locally terminated. So, for example, DSA would install this entry on swp0 instead of installing it on the CPU port as it should. There is an even sadder part, which is that the 'local' flag is implicit if 'static' is not specified, meaning that this command produces the same result of adding a 'local' entry: bridge fdb add dev swp0 00:01:02:03:04:05 master I've updated the man pages for 'bridge', and after reading it now, it should be pretty clear to any user that the commands above were broken and should have never resulted in the 00:01:02:03:04:05 address being forwarded (this behavior is coherent with non-switchdev interfaces): https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/ If you're a user reading this and this is what you want, just use: bridge fdb add dev swp0 00:01:02:03:04:05 master static Because switchdev should have given drivers the means from day one to classify FDB entries as local/non-local, but didn't, it means that all drivers are currently broken. So we can just as well omit the switchdev notifications for local FDB entries, which is exactly what this patch does to close the bug in stable trees. For further development work where drivers might want to trap the local FDB entries to the host, we can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and selectively make drivers act upon that bit, while all the others ignore those entries if the 'is_local' bit is set. Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6ab4c3117aec4e08007d9e971fa4133e1de1082d ]

As explained in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/

the switchdev notifiers for FDB entries managed to have a zero-day bug.
The bridge would not say that this entry is local:

ip link add br0 type bridge
ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master local

and the switchdev driver would be more than happy to offload it as a
normal static FDB entry. This is despite the fact that 'local' and
non-'local' entries have completely opposite directions: a local entry
is locally terminated and not forwarded, whereas a static entry is
forwarded and not locally terminated. So, for example, DSA would install
this entry on swp0 instead of installing it on the CPU port as it should.

There is an even sadder part, which is that the 'local' flag is implicit
if 'static' is not specified, meaning that this command produces the
same result of adding a 'local' entry:

bridge fdb add dev swp0 00:01:02:03:04:05 master

I've updated the man pages for 'bridge', and after reading it now, it
should be pretty clear to any user that the commands above were broken
and should have never resulted in the 00:01:02:03:04:05 address being
forwarded (this behavior is coherent with non-switchdev interfaces):
https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/
If you're a user reading this and this is what you want, just use:

bridge fdb add dev swp0 00:01:02:03:04:05 master static

Because switchdev should have given drivers the means from day one to
classify FDB entries as local/non-local, but didn't, it means that all
drivers are currently broken. So we can just as well omit the switchdev
notifications for local FDB entries, which is exactly what this patch
does to close the bug in stable trees. For further development work
where drivers might want to trap the local FDB entries to the host, we
can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and
selectively make drivers act upon that bit, while all the others ignore
those entries if the 'is_local' bit is set.

Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: bridge: use switchdev for port flags set through sysfs too 2021-03-07T11:35:47+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-02-07T19:47:33+00:00 60b673f3788b49af14023bd13ef8533f2f627bd1 commit 8043c845b63a2dd88daf2d2d268a33e1872800f0 upstream. Looking through patchwork I don't see that there was any consensus to use switchdev notifiers only in case of netlink provided port flags but not sysfs (as a sort of deprecation, punishment or anything like that), so we should probably keep the user interface consistent in terms of functionality. http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/ http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/ Fixes: 3922285d96e7 ("net: bridge: Add support for offloading port attributes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8043c845b63a2dd88daf2d2d268a33e1872800f0 upstream.

Looking through patchwork I don't see that there was any consensus to
use switchdev notifiers only in case of netlink provided port flags but
not sysfs (as a sort of deprecation, punishment or anything like that),
so we should probably keep the user interface consistent in terms of
functionality.

http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/
http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/

Fixes: 3922285d96e7 ("net: bridge: Add support for offloading port attributes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state 2021-02-09T00:20:57+00:00 Horatiu Vultur horatiu.vultur@microchip.com 2021-02-06T21:47:33+00:00 b2bdba1cbc84cadb14393d0101a5bfd38d342e0a The function br_mrp_port_switchdev_set_state was called both with MRP port state and STP port state, which is an issue because they don't match exactly. Therefore, update the function to be used only with STP port state and use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE. The choice of using STP over MRP is that the drivers already implement SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port STP state. Fixes: 9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: fadd409136f0f2 ("bridge: switchdev: mrp: Implement MRP API for switchdev") Fixes: 2f1a11ae11d222 ("bridge: mrp: Add MRP interface.") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.

Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.

The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.

Fixes: 9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd409136f0f2 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae11d222 ("bridge: mrp: Add MRP interface.")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mrp: move struct definitions out of uapi 2021-01-23T20:38:42+00:00 Rasmus Villemoes rasmus.villemoes@prevas.dk 2021-01-21T20:40:37+00:00 6781939054a1a161e06e7a7955a4846be770a711 None of these are actually used in the kernel/userspace interface - there's a userspace component of implementing MRP, and userspace will need to construct certain frames to put on the wire, but there's no reason the kernel should provide the relevant definitions in a UAPI header. In fact, some of those definitions were broken until previous commit, so only keep the few that are actually referenced in the kernel code, and move them to the br_private_mrp.h header. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
None of these are actually used in the kernel/userspace interface -
there's a userspace component of implementing MRP, and userspace will
need to construct certain frames to put on the wire, but there's no
reason the kernel should provide the relevant definitions in a UAPI
header.

In fact, some of those definitions were broken until previous commit,
so only keep the few that are actually referenced in the kernel code,
and move them to the br_private_mrp.h header.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: bridge: Fix a warning when del bridge sysfs 2020-12-15T02:27:49+00:00 Wang Hai wanghai38@huawei.com 2020-12-11T12:29:21+00:00 989a1db06eb18ff605377eec87e18d795e0ec74b I got a warining report: br_sysfs_addbr: can't create group bridge4/bridge ------------[ cut here ]------------ sysfs group 'bridge' not found for kobject 'bridge4' WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline] WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270 Modules linked in: iptable_nat ... Call Trace: br_dev_delete+0x112/0x190 net/bridge/br_if.c:384 br_dev_newlink net/bridge/br_netlink.c:1381 [inline] br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362 __rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500 rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562 netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x139/0x170 net/socket.c:671 ____sys_sendmsg+0x658/0x7d0 net/socket.c:2353 ___sys_sendmsg+0xf8/0x170 net/socket.c:2407 __sys_sendmsg+0xd3/0x190 net/socket.c:2440 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 In br_device_event(), if the bridge sysfs fails to be added, br_device_event() should return error. This can prevent warining when removing bridge sysfs that do not exist. Fixes: bb900b27a2f4 ("bridge: allow creating bridge devices with netlink") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
I got a warining report:

br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
  br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
  br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
  br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
  __rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
  rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
  rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
  netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
  netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
  netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
  netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
  sock_sendmsg_nosec net/socket.c:651 [inline]
  sock_sendmsg+0x139/0x170 net/socket.c:671
  ____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
  ___sys_sendmsg+0xf8/0x170 net/socket.c:2407
  __sys_sendmsg+0xd3/0x190 net/socket.c:2440
  do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.

Fixes: bb900b27a2f4 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next 2020-12-14T23:43:21+00:00 Jakub Kicinski kuba@kernel.org 2020-12-14T23:43:20+00:00 7bca5021a4e653a323492cb500cfc387331481b9 Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap. 2) Use atomic_inc_return() instead of atomic_add_return() in IPVS, from Yejune Deng. 3) Simplify check for overquota in xt_nfacct, from Kaixu Xia. 4) Move nfnl_acct_list away from struct net, from Miao Wang. 5) Pass actual sk in reject actions, from Jan Engelhardt. 6) Add timeout and protoinfo to ctnetlink destroy events, from Florian Westphal. 7) Four patches to generalize set infrastructure to support for multiple expressions per set element. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: netlink support for several set element expressions netfilter: nftables: generalize set extension to support for several expressions netfilter: nftables: move nft_expr before nft_set netfilter: nftables: generalize set expressions support netfilter: ctnetlink: add timeout and protoinfo to destroy events netfilter: use actual socket sk for REJECT action netfilter: nfnl_acct: remove data from struct net netfilter: Remove unnecessary conversion to bool ipvs: replace atomic_add_return() netfilter: nft_reject_bridge: fix build errors due to code movement ==================== Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap.

2) Use atomic_inc_return() instead of atomic_add_return() in IPVS,
   from Yejune Deng.

3) Simplify check for overquota in xt_nfacct, from Kaixu Xia.

4) Move nfnl_acct_list away from struct net, from Miao Wang.

5) Pass actual sk in reject actions, from Jan Engelhardt.

6) Add timeout and protoinfo to ctnetlink destroy events,
   from Florian Westphal.

7) Four patches to generalize set infrastructure to support
   for multiple expressions per set element.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
  netfilter: nftables: netlink support for several set element expressions
  netfilter: nftables: generalize set extension to support for several expressions
  netfilter: nftables: move nft_expr before nft_set
  netfilter: nftables: generalize set expressions support
  netfilter: ctnetlink: add timeout and protoinfo to destroy events
  netfilter: use actual socket sk for REJECT action
  netfilter: nfnl_acct: remove data from struct net
  netfilter: Remove unnecessary conversion to bool
  ipvs: replace atomic_add_return()
  netfilter: nft_reject_bridge: fix build errors due to code movement
====================

Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-12-12T06:29:38+00:00 Jakub Kicinski kuba@kernel.org 2020-12-12T04:12:36+00:00 46d5e62dd3c34770f3bfd0642daa9a7772a00362 xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().

strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.

Conflicts:
	net/netfilter/nf_tables_api.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>