linux-stable.git/net/bluetooth, branch v5.4.145

Bluetooth: hidp: use correct wait queue when removing ctrl_wait

2021-08-26T12:36:15+00:00

[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]

A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.

 list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
	but was dead000000000200. (next=ffffffc03ac77de0).
 ------------[ cut here ]------------
 CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G           O    4.4.238+ #9
 ...
 ---[ end trace 0adc2158f0646eac ]---
 Call trace:
 [] __list_add+0x38/0xb0
 [] add_wait_queue+0x4c/0x68
 [] __pollwait+0xec/0x100
 [] bt_sock_poll+0x74/0x200
 [] sock_poll+0x110/0x128
 [] do_sys_poll+0x220/0x480
 [] SyS_poll+0x80/0x138
 [] __sys_trace_return+0x0/0x4

 Unable to handle kernel paging request at virtual address dead000000000100
 ...
 CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G        W  O    4.4.238+ #9
 ...
 Call trace:
  [] __wake_up_common+0x7c/0xa8
  [] __wake_up+0x50/0x70
  [] sock_def_wakeup+0x58/0x60
  [] l2cap_sock_teardown_cb+0x200/0x224
  [] l2cap_chan_del+0xa4/0x298
  [] l2cap_conn_del+0x118/0x198
  [] l2cap_disconn_cfm+0x6c/0x78
  [] hci_event_packet+0x564/0x2e30
  [] hci_rx_work+0x10c/0x360
  [] process_one_work+0x268/0x460
  [] worker_thread+0x268/0x480
  [] kthread+0x118/0x128
  [] ret_from_fork+0x10/0x20
  ---[ end trace 0adc2158f0646ead ]---

Signed-off-by: Ole Bjørn Midtbø 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: defer cleanup of resources in hci_unregister_dev()

2021-08-12T11:20:58+00:00

[ Upstream commit e04480920d1eec9c061841399aa6f35b6f987d8b ]

syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].

It seems that history of this locking problem is a trial and error.

Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.

Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.

Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().

Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.

This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).

But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.

Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.

Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag.  There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.

Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot 
Suggested-by: Linus Torvalds 
Signed-off-by: Tetsuo Handa 
Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"

2021-08-08T07:04:08+00:00

This reverts commit aa9a2ec7ee08dda41bb565b692f34c620d63b517 which is
commit 0ea9fd001a14ebc294f112b0361a4e601551d508 upstream.

It has been reported to have problems:
	https://lore.kernel.org/linux-bluetooth/8735ryk0o7.fsf@baylibre.com/

Reported-by: Guenter Roeck 
Cc: Kai-Heng Feng 
Cc: Marcel Holtmann 
Cc: Sasha Levin 
Link: https://lore.kernel.org/r/efee3a58-a4d2-af22-0931-e81b877ab539@roeck-us.net
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Shutdown controller after workqueues are flushed or cancelled

2021-07-19T06:53:13+00:00

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix the HCI to MGMT status conversion table

2021-07-19T06:53:13+00:00

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.

Reviewed-by: Miao-chen Chou 
Signed-off-by: Yu Liu 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event

2021-07-14T14:53:34+00:00

[ Upstream commit 23837a6d7a1a61818ed94a6b8af552d6cf7d32d5 ]

Error status of this event means that it has ended due reasons other
than a connection:

 'If advertising has terminated as a result of the advertising duration
 elapsing, the Status parameter shall be set to the error code
 Advertising Timeout (0x3C).'

 'If advertising has terminated because the
 Max_Extended_Advertising_Events was reached, the Status parameter
 shall be set to the error code Limit Reached (0x43).'

Fixes: acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid

2021-07-14T14:53:34+00:00

[ Upstream commit 799acb9347915bfe4eac0ff2345b468f0a1ca207 ]

This fixes parsing of LTV entries when the length is 0.

Found with:

tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)"

Add Advertising - Success (ScRsp only) - run
  Sending Add Advertising (0x003e)
  Test condition added, total 1
[   11.004577] ==================================================================
[   11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0
[   11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87
[   11.006711]
[   11.007176]
[   11.007429] Allocated by task 87:
[   11.008151]
[   11.008438] The buggy address belongs to the object at ffff888002c69580
[   11.008438]  which belongs to the cache kmalloc-64 of size 64
[   11.010526] The buggy address is located 48 bytes inside of
[   11.010526]  64-byte region [ffff888002c69580, ffff888002c695c0)
[   11.012423] The buggy address belongs to the page:
[   11.013291]
[   11.013544] Memory state around the buggy address:
[   11.014359]  ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.015453]  ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.017010]                                      ^
[   11.017547]  ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.018296]  ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.019116] ==================================================================

Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: use correct lock to prevent UAF of hdev object

2021-06-10T11:37:09+00:00

commit e305509e678b3a4af2b3cfd410f409f7cdaabb52 upstream.

The hci_sock_dev_event() function will cleanup the hdev object for
sockets even if this object may still be in used within the
hci_sock_bound_ioctl() function, result in UAF vulnerability.

This patch replace the BH context lock to serialize these affairs
and prevent the race condition.

Signed-off-by: Lin Ma 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: fix the erroneous flush_work() order

2021-06-10T11:37:09+00:00

commit 6a137caec23aeb9e036cdfd8a46dd8a366460e5d upstream.

In the cleanup routine for failed initialization of HCI device,
the flush_work(&hdev->rx_work) need to be finished before the
flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can
possibly invoke new cmd_work and cause a bug, like double free,
in late processings.

This was assigned CVE-2021-3564.

This patch reorder the flush_work() to fix this bug.

Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Lin Ma 
Signed-off-by: Hao Xiong 
Cc: stable 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails

2021-06-03T06:59:06+00:00

commit 8da3a0b87f4f1c3a3bbc4bfb78cf68476e97d183 upstream.

When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.

Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.

Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman