linux-stable.git/net/bluetooth, branch v5.13.4

Bluetooth: mgmt: Fix the command returns garbage parameter value

2021-07-19T08:04:46+00:00

[ Upstream commit 02ce2c2c24024aade65a8d91d6a596651eaf2d0a ]

When the Get Device Flags command fails, it returns the error status
with the parameters filled with the garbage values. Although the
parameters are not used, it is better to fill with zero than the random
values.

Signed-off-by: Tedd Ho-Jeong An 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix invalid access on ECRED Connection response

2021-07-19T08:04:45+00:00

[ Upstream commit de895b43932cb47e69480540be7eca289af24f23 ]

The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure fails

2021-07-19T08:04:45+00:00

[ Upstream commit 1fa20d7d4aad02206e84b74915819fbe9f81dab3 ]

The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.

Reported-by: Dan Carpenter 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Shutdown controller after workqueues are flushed or cancelled

2021-07-19T08:04:45+00:00

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix alt settings for incoming SCO with transparent coding format

2021-07-19T08:04:45+00:00

[ Upstream commit 06d213d8a89a6f55b708422c3dda2b22add10748 ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  #309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 #310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  #311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               #314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #325 [hci0] 49.500311

Signed-off-by: Kiran K 
Signed-off-by: Lokendra Singh 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix the HCI to MGMT status conversion table

2021-07-19T08:04:45+00:00

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.

Reviewed-by: Miao-chen Chou 
Signed-off-by: Yu Liu 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails

2021-07-19T08:04:45+00:00

[ Upstream commit 3cfdf8fcaafa62a4123f92eb0f4a72650da3a479 ]

When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.

Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.

Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event

2021-07-14T15:07:21+00:00

[ Upstream commit 23837a6d7a1a61818ed94a6b8af552d6cf7d32d5 ]

Error status of this event means that it has ended due reasons other
than a connection:

 'If advertising has terminated as a result of the advertising duration
 elapsing, the Status parameter shall be set to the error code
 Advertising Timeout (0x3C).'

 'If advertising has terminated because the
 Max_Extended_Advertising_Events was reached, the Status parameter
 shall be set to the error code Limit Reached (0x43).'

Fixes: acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix Set Extended (Scan Response) Data

2021-07-14T15:07:21+00:00

[ Upstream commit c9ed0a7077306f9d41d74fb006ab5dbada8349c5 ]

These command do have variable length and the length can go up to 251,
so this changes the struct to not use a fixed size and then when
creating the PDU only the actual length of the data send to the
controller.

Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid

2021-07-14T15:07:21+00:00

[ Upstream commit 799acb9347915bfe4eac0ff2345b468f0a1ca207 ]

This fixes parsing of LTV entries when the length is 0.

Found with:

tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)"

Add Advertising - Success (ScRsp only) - run
  Sending Add Advertising (0x003e)
  Test condition added, total 1
[   11.004577] ==================================================================
[   11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0
[   11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87
[   11.006711]
[   11.007176]
[   11.007429] Allocated by task 87:
[   11.008151]
[   11.008438] The buggy address belongs to the object at ffff888002c69580
[   11.008438]  which belongs to the cache kmalloc-64 of size 64
[   11.010526] The buggy address is located 48 bytes inside of
[   11.010526]  64-byte region [ffff888002c69580, ffff888002c695c0)
[   11.012423] The buggy address belongs to the page:
[   11.013291]
[   11.013544] Memory state around the buggy address:
[   11.014359]  ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.015453]  ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.017010]                                      ^
[   11.017547]  ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.018296]  ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.019116] ==================================================================

Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin